From: Robert Budai <robert.budai@analog.com>
To: Nuno Sa <nuno.sa@analog.com>,
Ramona Gradinariu <ramona.gradinariu@analog.com>,
Antoniu Miclaus <antoniu.miclaus@analog.com>,
Robert Budai <robert.budai@analog.com>,
Lars-Peter Clausen <lars@metafoo.de>,
Michael Hennerich <Michael.Hennerich@analog.com>,
Jonathan Cameron <jic23@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jonathan Corbet <corbet@lwn.net>, <linux-iio@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-doc@vger.kernel.org>
Subject: [PATCH v7 4/6] dt-bindings: iio: Add adis16550 bindings
Date: Tue, 11 Feb 2025 19:57:01 +0200 [thread overview]
Message-ID: <20250211175706.276987-5-robert.budai@analog.com> (raw)
In-Reply-To: <20250211175706.276987-1-robert.budai@analog.com>
Document the ADIS16550 device devicetree bindings.
Co-developed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Signed-off-by: Robert Budai <robert.budai@analog.com>
---
v7:
- dropped clock-frequency binding as suggested
.../bindings/iio/imu/adi,adis16550.yaml | 73 +++++++++++++++++++
MAINTAINERS | 10 +++
2 files changed, 83 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
new file mode 100644
index 000000000..b55cd0f7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/adi,adis16550.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADIS16550 and similar IMUs
+
+maintainers:
+ - Nuno Sa <nuno.sa@analog.com>
+ - Ramona Gradinariu <ramona.gradinariu@analog.com>
+ - Antoniu Miclaus <antoniu.miclaus@analog.com>
+ - Robert Budai <robert.budai@analog.com>
+
+properties:
+ compatible:
+ enum:
+ - adi,adis16550
+
+ reg:
+ maxItems: 1
+
+ spi-cpha: true
+ spi-cpol: true
+
+ spi-max-frequency:
+ maximum: 15000000
+
+ vdd-supply: true
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ description:
+ Must be the device tree identifier of the RESET pin. If specified,
+ it will be asserted during driver probe. As the line is active low,
+ it should be marked GPIO_ACTIVE_LOW.
+ maxItems: 1
+
+ clocks:
+ description: If not provided, then the internal clock is used.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - spi-cpha
+ - spi-cpol
+ - spi-max-frequency
+ - vdd-supply
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+additionalProperties: false
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ imu@0 {
+ compatible = "adi,adis16550";
+ reg = <0>;
+ spi-max-frequency = <15000000>;
+ spi-cpol;
+ spi-cpha;
+ vdd-supply = <&vdd>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 25c86f473..d3e6258fa 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1485,6 +1485,16 @@ W: https://ez.analog.com/linux-software-drivers
F: Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
F: drivers/iio/imu/adis16475.c
+ANALOG DEVICES INC ADIS16550 DRIVER
+M: Nuno Sa <nuno.sa@analog.com>
+M: Ramona Gradinariu <ramona.gradinariu@analog.com>
+M: Antoniu Miclaus <antoniu.miclaus@analog.com>
+M: Robert Budai <robert.budai@analog.com>
+L: linux-iio@vger.kernel.org
+S: Supported
+W: https://ez.analog.com/linux-software-drivers
+F: Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
+
ANALOG DEVICES INC ADM1177 DRIVER
M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-hwmon@vger.kernel.org
--
2.34.1
next prev parent reply other threads:[~2025-02-11 19:59 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-11 17:56 [PATCH v7 0/6] Add support for ADIS16550 Robert Budai
2025-02-11 17:56 ` [PATCH v7 1/6] iio: imu: adis: Add custom ops struct Robert Budai
2025-02-11 17:56 ` [PATCH v7 2/6] iio: imu: adis: Add reset to custom ops Robert Budai
2025-02-11 17:57 ` [PATCH v7 3/6] iio: imu: adis: Add DIAG_STAT register Robert Budai
2025-02-13 3:55 ` kernel test robot
2025-02-13 4:27 ` kernel test robot
2025-02-13 5:40 ` kernel test robot
2025-02-13 17:57 ` kernel test robot
2025-02-16 16:43 ` Jonathan Cameron
2025-02-11 17:57 ` Robert Budai [this message]
2025-02-12 7:00 ` [PATCH v7 4/6] dt-bindings: iio: Add adis16550 bindings Krzysztof Kozlowski
2025-02-11 17:57 ` [PATCH v7 5/6] iio: imu: adis16550: add adis16550 support Robert Budai
2025-02-16 16:54 ` Jonathan Cameron
2025-02-11 17:57 ` [PATCH v7 6/6] docs: iio: add documentation for adis16550 driver Robert Budai
2025-02-16 16:56 ` Jonathan Cameron
2025-02-16 16:40 ` [PATCH v7 0/6] Add support for ADIS16550 Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250211175706.276987-5-robert.budai@analog.com \
--to=robert.budai@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=antoniu.miclaus@analog.com \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-doc@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=ramona.gradinariu@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.