From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Subject: [PATCH v2 04/11] drm/i915/ddi: Set missing TC DP PHY lane stagger delay in DDI_BUF_CTL
Date: Fri, 14 Feb 2025 16:19:54 +0200 [thread overview]
Message-ID: <20250214142001.552916-5-imre.deak@intel.com> (raw)
In-Reply-To: <20250214142001.552916-1-imre.deak@intel.com>
Add the missing PHY lane stagger delay programming for ICL-ADL
platforms on TypeC DP outputs.
v2: (Jani)
- Clarify code comment about lane stagger programming.
- Robustify macro calls with parens.
Bspec: 7534, 49533
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/display/intel_ddi.c | 29 ++++++++++++++++++++++++
drivers/gpu/drm/i915/i915_reg.h | 3 +++
2 files changed, 32 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index a09363e5dc148..1e7ae93340ff4 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -328,9 +328,32 @@ static u32 ddi_buf_phy_link_rate(int port_clock)
}
}
+static int dp_phy_lane_stagger_delay(int port_clock)
+{
+ /*
+ * Return the number of symbol clocks delay used to stagger the
+ * assertion/desassertion of the port lane enables. The target delay
+ * time is 100 ns or greater, return the number of symbols specific to
+ * the provided port_clock (aka link clock) corresponding to this delay
+ * time, i.e. so that
+ *
+ * number_of_symbols * duration_of_one_symbol >= 100 ns
+ *
+ * The delay must be applied only on TypeC DP outputs, for everything else
+ * the delay must be set to 0.
+ *
+ * Return the number of link symbols per 100 ns:
+ * port_clock (10 kHz) -> bits / 100 us
+ * / symbol_size -> symbols / 100 us
+ * / 1000 -> symbols / 100 ns
+ */
+ return DIV_ROUND_UP(port_clock, intel_dp_link_symbol_size(port_clock) * 1000);
+}
+
static void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state)
{
+ struct intel_display *display = to_intel_display(encoder);
struct drm_i915_private *i915 = to_i915(encoder->base.dev);
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
@@ -356,6 +379,12 @@ static void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder,
if (!intel_tc_port_in_tbt_alt_mode(dig_port))
intel_dp->DP |= DDI_BUF_CTL_TC_PHY_OWNERSHIP;
}
+
+ if (IS_DISPLAY_VER(display, 11, 13) && intel_encoder_is_tc(encoder)) {
+ int delay = dp_phy_lane_stagger_delay(crtc_state->port_clock);
+
+ intel_dp->DP |= DDI_BUF_LANE_STAGGER_DELAY(delay);
+ }
}
static int icl_calc_tbt_pll_link(struct intel_display *display,
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 3eea191f20175..50efaab3b5536 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3636,6 +3636,9 @@ enum skl_power_gate {
#define DDI_BUF_PORT_DATA_20BIT REG_FIELD_PREP(DDI_BUF_PORT_DATA_MASK, 1)
#define DDI_BUF_PORT_DATA_40BIT REG_FIELD_PREP(DDI_BUF_PORT_DATA_MASK, 2)
#define DDI_BUF_PORT_REVERSAL (1 << 16)
+#define DDI_BUF_LANE_STAGGER_DELAY_MASK REG_GENMASK(15, 8)
+#define DDI_BUF_LANE_STAGGER_DELAY(symbols) REG_FIELD_PREP(DDI_BUF_LANE_STAGGER_DELAY_MASK, \
+ (symbols))
#define DDI_BUF_IS_IDLE (1 << 7)
#define DDI_BUF_CTL_TC_PHY_OWNERSHIP REG_BIT(6)
#define DDI_A_4_LANES (1 << 4)
--
2.44.2
next prev parent reply other threads:[~2025-02-14 14:19 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-14 14:19 [PATCH v2 00/11] drm/i915/ddi: Fix/simplify port enabling/disabling Imre Deak
2025-02-14 14:19 ` [PATCH v2 01/11] drm/i915/dsi: Use TRANS_DDI_FUNC_CTL's own port width macro Imre Deak
2025-02-14 14:19 ` [PATCH v2 02/11] drm/i915/ddi: Fix HDMI port width programming in DDI_BUF_CTL Imre Deak
2025-02-14 14:19 ` [PATCH v2 03/11] drm/i915/ddi: Make all the PORT_WIDTH macros work the same way Imre Deak
2025-02-14 14:19 ` Imre Deak [this message]
2025-02-14 14:19 ` [PATCH v2 05/11] drm/i915/ddi: Simplify the port enabling via DDI_BUF_CTL Imre Deak
2025-02-14 14:19 ` [PATCH v2 06/11] drm/i915/ddi: Simplify the port disabling " Imre Deak
2025-02-14 14:19 ` [PATCH v2 07/11] drm/i915/ddi: Simplify waiting for a port to get active/idle " Imre Deak
2025-02-14 14:19 ` [PATCH v2 08/11] drm/i915/ddi: Move platform checks within mtl_ddi_enable/disable_d2d_link() Imre Deak
2025-02-14 14:19 ` [PATCH v2 09/11] drm/i915/ddi: Unify the platform specific functions disabling a port Imre Deak
2025-02-14 14:20 ` [PATCH v2 10/11] drm/i915/ddi: Add a helper to enable " Imre Deak
2025-02-14 14:20 ` [PATCH v2 11/11] drm/i915/ddi: Sanitize DDI_BUF_CTL register definitions Imre Deak
2025-02-14 15:09 ` ✓ CI.Patch_applied: success for drm/i915/ddi: Fix/simplify port enabling/disabling (rev2) Patchwork
2025-02-14 15:09 ` ✗ CI.checkpatch: warning " Patchwork
2025-02-14 15:10 ` ✓ CI.KUnit: success " Patchwork
2025-02-14 15:14 ` ✗ Fi.CI.CHECKPATCH: warning " Patchwork
2025-02-14 15:14 ` ✗ Fi.CI.SPARSE: " Patchwork
2025-02-14 15:27 ` ✓ CI.Build: success " Patchwork
2025-02-14 15:29 ` ✓ CI.Hooks: " Patchwork
2025-02-14 15:31 ` ✗ CI.checksparse: warning " Patchwork
2025-02-14 15:33 ` ✓ i915.CI.BAT: success " Patchwork
2025-02-14 15:37 ` [PATCH v2 00/11] drm/i915/ddi: Fix/simplify port enabling/disabling Jani Nikula
2025-02-14 15:50 ` ✓ Xe.CI.BAT: success for drm/i915/ddi: Fix/simplify port enabling/disabling (rev2) Patchwork
2025-02-14 17:18 ` ✗ i915.CI.Full: failure " Patchwork
2025-02-14 20:15 ` Imre Deak
2025-02-14 20:22 ` Imre Deak
2025-02-15 14:55 ` ✗ Xe.CI.Full: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250214142001.552916-5-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.