All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To: <alucerop@amd.com>
Cc: <linux-cxl@vger.kernel.org>, <netdev@vger.kernel.org>,
	<dan.j.williams@intel.com>, <edward.cree@amd.com>,
	<davem@davemloft.net>, <kuba@kernel.org>, <pabeni@redhat.com>,
	<edumazet@google.com>, <dave.jiang@intel.com>
Subject: Re: [PATCH v10 04/26] cxl: move register/capability check to driver
Date: Fri, 14 Feb 2025 17:21:50 +0000	[thread overview]
Message-ID: <20250214172150.0000136c@huawei.com> (raw)
In-Reply-To: <20250205151950.25268-5-alucerop@amd.com>

On Wed, 5 Feb 2025 15:19:28 +0000
alucerop@amd.com wrote:

> From: Alejandro Lucero <alucerop@amd.com>
> 
> Type3 has some mandatory capabilities which are optional for Type2.
> 
> In order to support same register/capability discovery code for both
> types, avoid any assumption about what capabilities should be there, and
> export the capabilities found for the caller doing the capabilities
> check based on the expected ones.
> 
> Signed-off-by: Alejandro Lucero <alucerop@amd.com>

A few additional trivial comments.
With that and missing docs tidied up seems fine to me.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

>  

> diff --git a/include/cxl/cxl.h b/include/cxl/cxl.h
> index 722782b868ac..790d0520eaf4 100644
> --- a/include/cxl/cxl.h
> +++ b/include/cxl/cxl.h
> @@ -5,6 +5,26 @@
>  #define __CXL_H
>  
>  #include <linux/types.h>
> +
> +/* Capabilities as defined for:
Nit. It's not networking code, so lets use the standard
the rest of the kernel (more or less :) follows.
/*
 * Capabilities as defined for:

> + *
> + *	Component Registers (Table 8-22 CXL 3.1 specification)
> + *	Device Registers (8.2.8.2.1 CXL 3.1 specification)
> + *
> + * and currently being used for kernel CXL support.
> + */
> +
> +enum cxl_dev_cap {
> +	/* capabilities from Component Registers */
> +	CXL_DEV_CAP_RAS,
> +	CXL_DEV_CAP_HDM,
> +	/* capabilities from Device Registers */
> +	CXL_DEV_CAP_DEV_STATUS,
> +	CXL_DEV_CAP_MAILBOX_PRIMARY,
> +	CXL_DEV_CAP_MEMDEV,
> +	CXL_MAX_CAPS,
> +};
> +
>  /*
>   * enum cxl_devtype - delineate type-2 from a generic type-3 device
>   * @CXL_DEVTYPE_DEVMEM - Vendor specific CXL Type-2 device implementing HDM-D or
> @@ -22,5 +42,4 @@ enum cxl_devtype {
>  struct device;
>  struct cxl_memdev_state *cxl_memdev_state_create(struct device *dev, u64 serial,
>  					   u16 dvsec, enum cxl_devtype type);
> -
Stray change.  Drop it or push to earlier patch so the line never existed.

>  #endif


  parent reply	other threads:[~2025-02-14 17:21 UTC|newest]

Thread overview: 76+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-05 15:19 [PATCH v10 00/26] cxl: add type2 device basic support alucerop
2025-02-05 15:19 ` [PATCH v10 01/26] cxl: make memdev creation type agnostic alucerop
2025-02-06 19:37   ` Dan Williams
2025-02-17 12:32     ` Alejandro Lucero Palau
2025-02-19  2:29       ` Dan Williams
2025-02-20 18:17         ` Alejandro Lucero Palau
2025-02-17 13:05     ` Alejandro Lucero Palau
2025-02-13  3:57   ` Alison Schofield
2025-02-17 12:49     ` Alejandro Lucero Palau
2025-02-17 13:06     ` Alejandro Lucero Palau
2025-02-14 17:02   ` Jonathan Cameron
2025-02-17 13:08     ` Alejandro Lucero Palau
2025-02-05 15:19 ` [PATCH v10 02/26] sfc: add basic cxl initialization alucerop
2025-02-06  1:37   ` Edward Cree
2025-02-07 12:48   ` Simon Horman
2025-02-17 13:10     ` Alejandro Lucero Palau
2025-02-07 13:03   ` Simon Horman
2025-02-17 13:11     ` Alejandro Lucero Palau
2025-02-18 13:32       ` Simon Horman
2025-02-05 15:19 ` [PATCH v10 03/26] cxl: move pci generic code alucerop
2025-02-05 21:33   ` Ira Weiny
2025-02-06 17:49     ` Alejandro Lucero Palau
2025-02-14 17:11       ` Jonathan Cameron
2025-02-17 13:13         ` Alejandro Lucero Palau
2025-02-05 15:19 ` [PATCH v10 04/26] cxl: move register/capability check to driver alucerop
2025-02-07 12:52   ` Simon Horman
2025-02-17 13:17     ` Alejandro Lucero Palau
2025-02-14 17:21   ` Jonathan Cameron [this message]
2025-02-17 13:18     ` Alejandro Lucero Palau
2025-02-05 15:19 ` [PATCH v10 05/26] cxl: add function for type2 cxl regs setup alucerop
2025-02-05 21:35   ` Ira Weiny
2025-02-06 17:50     ` Alejandro Lucero Palau
2025-02-05 15:19 ` [PATCH v10 06/26] sfc: use cxl api for regs setup and checking alucerop
2025-02-05 21:31   ` Ira Weiny
2025-02-06 17:47     ` Alejandro Lucero Palau
2025-02-05 15:19 ` [PATCH v10 07/26] cxl: add support for setting media ready by an accel driver alucerop
2025-02-05 21:42   ` Ira Weiny
2025-02-06 17:58     ` Alejandro Lucero Palau
2025-02-05 15:19 ` [PATCH v10 08/26] sfc: set cxl media ready alucerop
2025-02-05 15:19 ` [PATCH v10 09/26] cxl: support device identification without mailbox alucerop
2025-02-05 21:45   ` Ira Weiny
2025-02-06 18:10     ` Alejandro Lucero Palau
2025-02-06 19:23       ` Ira Weiny
2025-02-17 13:41         ` Alejandro Lucero Palau
2025-02-05 15:19 ` [PATCH v10 10/26] cxl: modify dpa setup process for supporting type2 alucerop
2025-02-05 15:19 ` [PATCH v10 11/26] sfc: initialize dpa resources alucerop
2025-02-05 15:19 ` [PATCH v10 12/26] cxl: prepare memdev creation for type2 alucerop
2025-02-05 15:19 ` [PATCH v10 13/26] sfc: create type2 cxl memdev alucerop
2025-02-05 15:19 ` [PATCH v10 14/26] cxl: define a driver interface for HPA free space enumeration alucerop
2025-02-07 12:55   ` Simon Horman
2025-02-17 13:44     ` Alejandro Lucero Palau
2025-02-13  4:08   ` Alison Schofield
2025-02-17 13:49     ` Alejandro Lucero Palau
2025-02-05 15:19 ` [PATCH v10 15/26] sfc: obtain root decoder with enough HPA free space alucerop
2025-02-05 22:47   ` Ira Weiny
2025-02-17 13:54     ` Alejandro Lucero Palau
2025-02-18  0:03       ` Ira Weiny
2025-02-05 15:19 ` [PATCH v10 16/26] cxl: define a driver interface for DPA allocation alucerop
2025-02-06 19:11   ` kernel test robot
2025-02-07 13:46   ` Simon Horman
2025-02-17 14:08     ` Alejandro Lucero Palau
2025-02-18 13:34       ` Simon Horman
2025-02-18 14:09         ` Simon Horman
2025-02-05 15:19 ` [PATCH v10 17/26] sfc: get endpoint decoder alucerop
2025-02-05 15:19 ` [PATCH v10 18/26] cxl: make region type based on endpoint type alucerop
2025-02-05 15:19 ` [PATCH v10 19/26] cxl/region: factor out interleave ways setup alucerop
2025-02-05 15:19 ` [PATCH v10 20/26] cxl/region: factor out interleave granularity setup alucerop
2025-02-05 15:19 ` [PATCH v10 21/26] cxl: allow region creation by type2 drivers alucerop
2025-02-06 20:06   ` kernel test robot
2025-02-07 13:23   ` Simon Horman
2025-02-05 15:19 ` [PATCH v10 22/26] cxl: add region flag for precluding a device memory to be used for dax alucerop
2025-02-05 15:19 ` [PATCH v10 23/26] sfc: create cxl region alucerop
2025-02-05 15:19 ` [PATCH v10 24/26] cxl: add function for obtaining region range alucerop
2025-02-05 15:19 ` [PATCH v10 25/26] sfc: update MCDI protocol headers alucerop
2025-02-05 15:19 ` [PATCH v10 26/26] sfc: support pio mapping based on cxl alucerop
2025-02-13  1:51 ` [PATCH v10 00/26] cxl: add type2 device basic support Alison Schofield

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250214172150.0000136c@huawei.com \
    --to=jonathan.cameron@huawei.com \
    --cc=alucerop@amd.com \
    --cc=dan.j.williams@intel.com \
    --cc=dave.jiang@intel.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=edward.cree@amd.com \
    --cc=kuba@kernel.org \
    --cc=linux-cxl@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.