From: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
To: Dimitri Fedrau <dima.fedrau@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Gregor Herburger <gregor.herburger@ew.tq-group.com>,
Stefan Eichenberger <eichest@gmail.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next 1/3] net: phy: marvell-88q2xxx: align defines
Date: Fri, 14 Feb 2025 18:52:31 +0100 [thread overview]
Message-ID: <20250214175231.GC2392035@ragnatech.se> (raw)
In-Reply-To: <20250214-marvell-88q2xxx-cleanup-v1-1-71d67c20f308@gmail.com>
Hi Dimitri,
Thanks for your work.
On 2025-02-14 17:32:03 +0100, Dimitri Fedrau wrote:
> Align some defines.
>
> Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
> drivers/net/phy/marvell-88q2xxx.c | 62 +++++++++++++++++++--------------------
> 1 file changed, 31 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/net/phy/marvell-88q2xxx.c b/drivers/net/phy/marvell-88q2xxx.c
> index bad5e7b2357da067bfd1ec6bd1307c42f5dc5c91..6e95de080bc65e8e8543d4effb9846fdd823a9d4 100644
> --- a/drivers/net/phy/marvell-88q2xxx.c
> +++ b/drivers/net/phy/marvell-88q2xxx.c
> @@ -12,29 +12,29 @@
> #include <linux/phy.h>
> #include <linux/hwmon.h>
>
> -#define PHY_ID_88Q2220_REVB0 (MARVELL_PHY_ID_88Q2220 | 0x1)
> -#define PHY_ID_88Q2220_REVB1 (MARVELL_PHY_ID_88Q2220 | 0x2)
> -#define PHY_ID_88Q2220_REVB2 (MARVELL_PHY_ID_88Q2220 | 0x3)
> -
> -#define MDIO_MMD_AN_MV_STAT 32769
> -#define MDIO_MMD_AN_MV_STAT_ANEG 0x0100
> -#define MDIO_MMD_AN_MV_STAT_LOCAL_RX 0x1000
> -#define MDIO_MMD_AN_MV_STAT_REMOTE_RX 0x2000
> -#define MDIO_MMD_AN_MV_STAT_LOCAL_MASTER 0x4000
> -#define MDIO_MMD_AN_MV_STAT_MS_CONF_FAULT 0x8000
> -
> -#define MDIO_MMD_AN_MV_STAT2 32794
> -#define MDIO_MMD_AN_MV_STAT2_AN_RESOLVED 0x0800
> -#define MDIO_MMD_AN_MV_STAT2_100BT1 0x2000
> -#define MDIO_MMD_AN_MV_STAT2_1000BT1 0x4000
> -
> -#define MDIO_MMD_PCS_MV_RESET_CTRL 32768
> -#define MDIO_MMD_PCS_MV_RESET_CTRL_TX_DISABLE 0x8
> -
> -#define MDIO_MMD_PCS_MV_INT_EN 32784
> -#define MDIO_MMD_PCS_MV_INT_EN_LINK_UP 0x0040
> -#define MDIO_MMD_PCS_MV_INT_EN_LINK_DOWN 0x0080
> -#define MDIO_MMD_PCS_MV_INT_EN_100BT1 0x1000
> +#define PHY_ID_88Q2220_REVB0 (MARVELL_PHY_ID_88Q2220 | 0x1)
> +#define PHY_ID_88Q2220_REVB1 (MARVELL_PHY_ID_88Q2220 | 0x2)
> +#define PHY_ID_88Q2220_REVB2 (MARVELL_PHY_ID_88Q2220 | 0x3)
> +
> +#define MDIO_MMD_AN_MV_STAT 32769
> +#define MDIO_MMD_AN_MV_STAT_ANEG 0x0100
> +#define MDIO_MMD_AN_MV_STAT_LOCAL_RX 0x1000
> +#define MDIO_MMD_AN_MV_STAT_REMOTE_RX 0x2000
> +#define MDIO_MMD_AN_MV_STAT_LOCAL_MASTER 0x4000
> +#define MDIO_MMD_AN_MV_STAT_MS_CONF_FAULT 0x8000
> +
> +#define MDIO_MMD_AN_MV_STAT2 32794
> +#define MDIO_MMD_AN_MV_STAT2_AN_RESOLVED 0x0800
> +#define MDIO_MMD_AN_MV_STAT2_100BT1 0x2000
> +#define MDIO_MMD_AN_MV_STAT2_1000BT1 0x4000
> +
> +#define MDIO_MMD_PCS_MV_RESET_CTRL 32768
> +#define MDIO_MMD_PCS_MV_RESET_CTRL_TX_DISABLE 0x8
> +
> +#define MDIO_MMD_PCS_MV_INT_EN 32784
> +#define MDIO_MMD_PCS_MV_INT_EN_LINK_UP 0x0040
> +#define MDIO_MMD_PCS_MV_INT_EN_LINK_DOWN 0x0080
> +#define MDIO_MMD_PCS_MV_INT_EN_100BT1 0x1000
>
> #define MDIO_MMD_PCS_MV_GPIO_INT_STAT 32785
> #define MDIO_MMD_PCS_MV_GPIO_INT_STAT_LINK_UP 0x0040
> @@ -80,11 +80,11 @@
> #define MDIO_MMD_PCS_MV_100BT1_STAT1_REMOTE_RX 0x2000
> #define MDIO_MMD_PCS_MV_100BT1_STAT1_LOCAL_MASTER 0x4000
>
> -#define MDIO_MMD_PCS_MV_100BT1_STAT2 33033
> -#define MDIO_MMD_PCS_MV_100BT1_STAT2_JABBER 0x0001
> -#define MDIO_MMD_PCS_MV_100BT1_STAT2_POL 0x0002
> -#define MDIO_MMD_PCS_MV_100BT1_STAT2_LINK 0x0004
> -#define MDIO_MMD_PCS_MV_100BT1_STAT2_ANGE 0x0008
> +#define MDIO_MMD_PCS_MV_100BT1_STAT2 33033
> +#define MDIO_MMD_PCS_MV_100BT1_STAT2_JABBER 0x0001
> +#define MDIO_MMD_PCS_MV_100BT1_STAT2_POL 0x0002
> +#define MDIO_MMD_PCS_MV_100BT1_STAT2_LINK 0x0004
> +#define MDIO_MMD_PCS_MV_100BT1_STAT2_ANGE 0x0008
>
> #define MDIO_MMD_PCS_MV_100BT1_INT_EN 33042
> #define MDIO_MMD_PCS_MV_100BT1_INT_EN_LINKEVENT 0x0400
> @@ -92,7 +92,7 @@
> #define MDIO_MMD_PCS_MV_COPPER_INT_STAT 33043
> #define MDIO_MMD_PCS_MV_COPPER_INT_STAT_LINKEVENT 0x0400
>
> -#define MDIO_MMD_PCS_MV_RX_STAT 33328
> +#define MDIO_MMD_PCS_MV_RX_STAT 33328
>
> #define MDIO_MMD_PCS_MV_TDR_RESET 65226
> #define MDIO_MMD_PCS_MV_TDR_RESET_TDR_RST 0x1000
> @@ -115,8 +115,8 @@
>
> #define MDIO_MMD_PCS_MV_TDR_OFF_CUTOFF 65246
>
> -#define MV88Q2XXX_LED_INDEX_TX_ENABLE 0
> -#define MV88Q2XXX_LED_INDEX_GPIO 1
> +#define MV88Q2XXX_LED_INDEX_TX_ENABLE 0
> +#define MV88Q2XXX_LED_INDEX_GPIO 1
>
> struct mv88q2xxx_priv {
> bool enable_temp;
>
> --
> 2.39.5
>
--
Kind Regards,
Niklas Söderlund
next prev parent reply other threads:[~2025-02-14 17:52 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-14 16:32 [PATCH net-next 0/3] net: phy: marvell-88q2xxx: cleanup Dimitri Fedrau
2025-02-14 16:32 ` [PATCH net-next 1/3] net: phy: marvell-88q2xxx: align defines Dimitri Fedrau
2025-02-14 17:52 ` Niklas Söderlund [this message]
2025-02-18 11:54 ` Marek Behún
2025-02-18 14:12 ` Andrew Lunn
2025-02-18 14:31 ` Marek Behún
2025-02-18 16:00 ` Russell King (Oracle)
2025-02-18 18:13 ` Dimitri Fedrau
2025-02-14 16:32 ` [PATCH net-next 2/3] net: phy: marvell-88q2xxx: order includes alphabetically Dimitri Fedrau
2025-02-14 17:53 ` Niklas Söderlund
2025-02-14 16:32 ` [PATCH net-next 3/3] net: phy: marvell-88q2xxx: enable temperature sensor in mv88q2xxx_config_init Dimitri Fedrau
2025-02-14 17:59 ` Niklas Söderlund
2025-02-14 19:45 ` Dimitri Fedrau
2025-02-20 15:37 ` Niklas Söderlund
2025-02-14 18:06 ` Andrew Lunn
2025-02-15 7:13 ` Dimitri Fedrau
2025-02-18 12:50 ` [PATCH net-next 0/3] net: phy: marvell-88q2xxx: cleanup patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250214175231.GC2392035@ragnatech.se \
--to=niklas.soderlund+renesas@ragnatech.se \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=dima.fedrau@gmail.com \
--cc=edumazet@google.com \
--cc=eichest@gmail.com \
--cc=gregor.herburger@ew.tq-group.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.