All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ravi Kumar kairi <kumarkairiravi@gmail.com>
To: dpenkler@gmail.com
Cc: gregkh@linuxfoundation.org, kuba@kernel.org,
	dan.carpenter@linaro.org, rmk+kernel@armlinux.org.uk,
	linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
	Ravi Kumar Kairi <kumarkairiravi@gmail.com>
Subject: [PATCH v5 2/3] staging:gpib:agilent_82350b.c: cleaned commented out code
Date: Tue, 18 Feb 2025 01:20:49 +0530	[thread overview]
Message-ID: <20250217195050.117167-3-kumarkairiravi@gmail.com> (raw)
In-Reply-To: <20250217195050.117167-1-kumarkairiravi@gmail.com>

From: Ravi Kumar Kairi <kumarkairiravi@gmail.com>

cleaned code that was commented out and cleaned blank line that resulted
from cleaning out commented code

Signed-off-by: Ravi Kumar Kairi <kumarkairiravi@gmail.com>
---
 .../staging/gpib/agilent_82350b/agilent_82350b.c   | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/drivers/staging/gpib/agilent_82350b/agilent_82350b.c b/drivers/staging/gpib/agilent_82350b/agilent_82350b.c
index 5a74a22015..af1bf6e893 100644
--- a/drivers/staging/gpib/agilent_82350b/agilent_82350b.c
+++ b/drivers/staging/gpib/agilent_82350b/agilent_82350b.c
@@ -176,8 +176,6 @@ static int agilent_82350b_accel_write(gpib_board_t *board, uint8_t *buffer, size
 
 	event_status = read_and_clear_event_status(board);
 
-	//pr_info("ag_ac_wr: event status 0x%x tms state 0x%lx\n", event_status, tms_priv->state);
-
 #ifdef EXPERIMENTAL
 	pr_info("ag_ac_wr: wait for previous BO to complete if any\n");
 	retval = wait_event_interruptible(board->wait,
@@ -190,14 +188,11 @@ static int agilent_82350b_accel_write(gpib_board_t *board, uint8_t *buffer, size
 		return retval;
 #endif
 
-	//pr_info("ag_ac_wr: sending first byte\n");
 	retval = agilent_82350b_write(board, buffer, 1, 0, &num_bytes);
 	*bytes_written += num_bytes;
 	if (retval < 0)
 		return retval;
 
-	//pr_info("ag_ac_wr: %ld bytes eoi %d tms state 0x%lx\n",length, send_eoi, tms_priv->state);
-
 	write_byte(tms_priv, tms_priv->imr0_bits & ~HR_BOIE, IMR0);
 	for (i = 1; i < fifotransferlength;) {
 		clear_bit(WRITE_READY_BN, &tms_priv->state);
@@ -210,12 +205,8 @@ static int agilent_82350b_accel_write(gpib_board_t *board, uint8_t *buffer, size
 		}
 		writeb(ENABLE_TI_TO_SRAM, a_priv->gpib_base + SRAM_ACCESS_CONTROL_REG);
 
-		//pr_info("ag_ac_wr: send block: %d bytes tms 0x%lx\n", block_size,
-		// tms_priv->state);
-
 		if (agilent_82350b_fifo_is_halted(a_priv)) {
 			writeb(RESTART_STREAM_BIT, a_priv->gpib_base + STREAM_STATUS_REG);
-			//	pr_info("ag_ac_wr: needed restart\n");
 		}
 
 		retval = wait_event_interruptible(board->wait,
@@ -226,7 +217,6 @@ static int agilent_82350b_accel_write(gpib_board_t *board, uint8_t *buffer, size
 						  test_bit(TIMO_NUM, &board->status));
 		writeb(0, a_priv->gpib_base + SRAM_ACCESS_CONTROL_REG);
 		num_bytes = block_size - read_transfer_counter(a_priv);
-		//pr_info("ag_ac_wr: sent  %ld bytes tms 0x%lx\n", num_bytes, tms_priv->state);
 
 		*bytes_written += num_bytes;
 		retval = translate_wait_return_value(board, retval);
@@ -238,9 +228,6 @@ static int agilent_82350b_accel_write(gpib_board_t *board, uint8_t *buffer, size
 		return retval;
 
 	if (send_eoi) {
-		//pr_info("ag_ac_wr: sending last byte with eoi byte no:   %d\n",
-		// fifotransferlength+1);
-
 		retval = agilent_82350b_write(board, buffer + fifotransferlength, 1, send_eoi,
 					      &num_bytes);
 		*bytes_written += num_bytes;
@@ -284,7 +271,6 @@ static irqreturn_t agilent_82350b_interrupt(int irq, void *arg)
 		tms9914_interrupt_have_status(board, &a_priv->tms9914_priv, tms9914_status1,
 					      tms9914_status2);
 	}
-//pr_info("event_status=0x%x s1 %x s2 %x\n", event_status,tms9914_status1,tms9914_status2);
 //write-clear status bits
 	if (event_status & (BUFFER_END_STATUS_BIT | TERM_COUNT_STATUS_BIT)) {
 		writeb(event_status & (BUFFER_END_STATUS_BIT | TERM_COUNT_STATUS_BIT),
-- 
2.48.1


  parent reply	other threads:[~2025-02-17 19:51 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-17 19:50 [PATCH v5 0/3] staging:gpib: typo fix and cleam up Ravi Kumar kairi
2025-02-17 19:50 ` [PATCH v5 1/3] staging:gpib:agilent_82350b.c: fixed a typo Ravi Kumar kairi
2025-02-18  7:51   ` Greg KH
2025-02-17 19:50 ` Ravi Kumar kairi [this message]
2025-02-18  7:51   ` [PATCH v5 2/3] staging:gpib:agilent_82350b.c: cleaned commented out code Greg KH
2025-02-17 19:50 ` [PATCH v5 3/3] staging:gpib:agilent_82350b.c: removed braces from a single if statement Ravi Kumar kairi
2025-02-18  7:52   ` Greg KH
2025-02-18  7:48 ` [PATCH v5 0/3] staging:gpib: typo fix and cleam up Dan Carpenter
2025-02-18 11:56   ` Ravi Kumar Kairi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250217195050.117167-3-kumarkairiravi@gmail.com \
    --to=kumarkairiravi@gmail.com \
    --cc=dan.carpenter@linaro.org \
    --cc=dpenkler@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=rmk+kernel@armlinux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.