From: Mario Limonciello <superm1@kernel.org>
To: "Gautham R . Shenoy" <gautham.shenoy@amd.com>,
Perry Yuan <perry.yuan@amd.com>
Cc: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>,
linux-kernel@vger.kernel.org (open list:X86 ARCHITECTURE (32-BIT
AND 64-BIT)),
linux-pm@vger.kernel.org (open list:CPU FREQUENCY SCALING
FRAMEWORK), Mario Limonciello <mario.limonciello@amd.com>,
Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Subject: [PATCH v3 07/18] cpufreq/amd-pstate-ut: Use _free macro to free put policy
Date: Mon, 17 Feb 2025 16:06:56 -0600 [thread overview]
Message-ID: <20250217220707.1468365-8-superm1@kernel.org> (raw)
In-Reply-To: <20250217220707.1468365-1-superm1@kernel.org>
From: Mario Limonciello <mario.limonciello@amd.com>
Using a scoped cleanup macro simplifies cleanup code.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
drivers/cpufreq/amd-pstate-ut.c | 33 ++++++++++++++-------------------
1 file changed, 14 insertions(+), 19 deletions(-)
diff --git a/drivers/cpufreq/amd-pstate-ut.c b/drivers/cpufreq/amd-pstate-ut.c
index ba3e06f349c6d..9f790c7254d52 100644
--- a/drivers/cpufreq/amd-pstate-ut.c
+++ b/drivers/cpufreq/amd-pstate-ut.c
@@ -26,6 +26,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/fs.h>
+#include <linux/cleanup.h>
#include <acpi/cppc_acpi.h>
@@ -127,11 +128,12 @@ static void amd_pstate_ut_check_perf(u32 index)
u32 highest_perf = 0, nominal_perf = 0, lowest_nonlinear_perf = 0, lowest_perf = 0;
u64 cap1 = 0;
struct cppc_perf_caps cppc_perf;
- struct cpufreq_policy *policy = NULL;
struct amd_cpudata *cpudata = NULL;
union perf_cached cur_perf;
for_each_possible_cpu(cpu) {
+ struct cpufreq_policy *policy __free(put_cpufreq_policy) = NULL;
+
policy = cpufreq_cpu_get(cpu);
if (!policy)
break;
@@ -142,7 +144,7 @@ static void amd_pstate_ut_check_perf(u32 index)
if (ret) {
amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_FAIL;
pr_err("%s cppc_get_perf_caps ret=%d error!\n", __func__, ret);
- goto skip_test;
+ return;
}
highest_perf = cppc_perf.highest_perf;
@@ -154,7 +156,7 @@ static void amd_pstate_ut_check_perf(u32 index)
if (ret) {
amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_FAIL;
pr_err("%s read CPPC_CAP1 ret=%d error!\n", __func__, ret);
- goto skip_test;
+ return;
}
highest_perf = AMD_CPPC_HIGHEST_PERF(cap1);
@@ -167,7 +169,7 @@ static void amd_pstate_ut_check_perf(u32 index)
if (highest_perf != cur_perf.highest_perf && !cpudata->hw_prefcore) {
pr_err("%s cpu%d highest=%d %d highest perf doesn't match\n",
__func__, cpu, highest_perf, cpudata->perf.highest_perf);
- goto skip_test;
+ return;
}
if (nominal_perf != cur_perf.nominal_perf ||
(lowest_nonlinear_perf != cur_perf.lowest_nonlinear_perf) ||
@@ -177,7 +179,7 @@ static void amd_pstate_ut_check_perf(u32 index)
__func__, cpu, nominal_perf, cpudata->perf.nominal_perf,
lowest_nonlinear_perf, cpudata->perf.lowest_nonlinear_perf,
lowest_perf, cpudata->perf.lowest_perf);
- goto skip_test;
+ return;
}
if (!((highest_perf >= nominal_perf) &&
@@ -188,15 +190,11 @@ static void amd_pstate_ut_check_perf(u32 index)
pr_err("%s cpu%d highest=%d >= nominal=%d > lowest_nonlinear=%d > lowest=%d > 0, the formula is incorrect!\n",
__func__, cpu, highest_perf, nominal_perf,
lowest_nonlinear_perf, lowest_perf);
- goto skip_test;
+ return;
}
- cpufreq_cpu_put(policy);
}
amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_PASS;
- return;
-skip_test:
- cpufreq_cpu_put(policy);
}
/*
@@ -207,10 +205,11 @@ static void amd_pstate_ut_check_perf(u32 index)
static void amd_pstate_ut_check_freq(u32 index)
{
int cpu = 0;
- struct cpufreq_policy *policy = NULL;
struct amd_cpudata *cpudata = NULL;
for_each_possible_cpu(cpu) {
+ struct cpufreq_policy *policy __free(put_cpufreq_policy) = NULL;
+
policy = cpufreq_cpu_get(cpu);
if (!policy)
break;
@@ -224,14 +223,14 @@ static void amd_pstate_ut_check_freq(u32 index)
pr_err("%s cpu%d max=%d >= nominal=%d > lowest_nonlinear=%d > min=%d > 0, the formula is incorrect!\n",
__func__, cpu, policy->cpuinfo.max_freq, cpudata->nominal_freq,
cpudata->lowest_nonlinear_freq, policy->cpuinfo.min_freq);
- goto skip_test;
+ return;
}
if (cpudata->lowest_nonlinear_freq != policy->min) {
amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_FAIL;
pr_err("%s cpu%d cpudata_lowest_nonlinear_freq=%d policy_min=%d, they should be equal!\n",
__func__, cpu, cpudata->lowest_nonlinear_freq, policy->min);
- goto skip_test;
+ return;
}
if (cpudata->boost_supported) {
@@ -243,20 +242,16 @@ static void amd_pstate_ut_check_freq(u32 index)
pr_err("%s cpu%d policy_max=%d should be equal cpu_max=%d or cpu_nominal=%d !\n",
__func__, cpu, policy->max, policy->cpuinfo.max_freq,
cpudata->nominal_freq);
- goto skip_test;
+ return;
}
} else {
amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_FAIL;
pr_err("%s cpu%d must support boost!\n", __func__, cpu);
- goto skip_test;
+ return;
}
- cpufreq_cpu_put(policy);
}
amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_PASS;
- return;
-skip_test:
- cpufreq_cpu_put(policy);
}
static int amd_pstate_set_mode(enum amd_pstate_mode mode)
--
2.43.0
next prev parent reply other threads:[~2025-02-17 22:07 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-17 22:06 [PATCH v3 00/18] amd-pstate cleanups Mario Limonciello
2025-02-17 22:06 ` [PATCH v3 01/18] cpufreq/amd-pstate: Invalidate cppc_req_cached during suspend Mario Limonciello
2025-02-19 5:24 ` Gautham R. Shenoy
2025-02-19 17:21 ` Mario Limonciello
2025-02-19 6:12 ` Dhananjay Ugwekar
2025-02-19 6:37 ` Dhananjay Ugwekar
2025-02-17 22:06 ` [PATCH v3 02/18] cpufreq/amd-pstate: Show a warning when a CPU fails to setup Mario Limonciello
2025-02-19 6:14 ` Dhananjay Ugwekar
2025-02-17 22:06 ` [PATCH v3 03/18] cpufreq/amd-pstate: Drop min and max cached frequencies Mario Limonciello
2025-02-19 5:25 ` Gautham R. Shenoy
2025-02-19 8:00 ` Dhananjay Ugwekar
2025-02-19 17:29 ` Mario Limonciello
2025-02-17 22:06 ` [PATCH v3 04/18] cpufreq/amd-pstate: Move perf values into a union Mario Limonciello
2025-02-19 10:57 ` Dhananjay Ugwekar
2025-02-25 0:29 ` Mario Limonciello
2025-02-25 4:28 ` Dhananjay Ugwekar
2025-02-17 22:06 ` [PATCH v3 05/18] cpufreq/amd-pstate: Overhaul locking Mario Limonciello
2025-02-17 22:06 ` [PATCH v3 06/18] cpufreq/amd-pstate: Drop `cppc_cap1_cached` Mario Limonciello
2025-02-17 22:06 ` Mario Limonciello [this message]
2025-02-17 22:06 ` [PATCH v3 08/18] cpufreq/amd-pstate-ut: Allow lowest nonlinear and lowest to be the same Mario Limonciello
2025-02-17 22:06 ` [PATCH v3 09/18] cpufreq/amd-pstate-ut: Drop SUCCESS and FAIL enums Mario Limonciello
2025-02-17 22:06 ` [PATCH v3 10/18] cpufreq/amd-pstate-ut: Run on all of the correct CPUs Mario Limonciello
2025-02-19 5:26 ` Gautham R. Shenoy
2025-02-17 22:07 ` [PATCH v3 11/18] cpufreq/amd-pstate-ut: Adjust variable scope for amd_pstate_ut_check_freq() Mario Limonciello
2025-02-24 6:12 ` Dhananjay Ugwekar
2025-02-17 22:07 ` [PATCH v3 12/18] cpufreq/amd-pstate: Replace all AMD_CPPC_* macros with masks Mario Limonciello
2025-02-17 22:07 ` [PATCH v3 13/18] cpufreq/amd-pstate: Cache CPPC request in shared mem case too Mario Limonciello
2025-02-17 22:07 ` [PATCH v3 14/18] cpufreq/amd-pstate: Move all EPP tracing into *_update_perf and *_set_epp functions Mario Limonciello
2025-02-17 22:07 ` [PATCH v3 15/18] cpufreq/amd-pstate: Update cppc_req_cached for shared mem EPP writes Mario Limonciello
2025-02-17 22:07 ` [PATCH v3 16/18] cpufreq/amd-pstate: Drop debug statements for policy setting Mario Limonciello
2025-02-17 22:07 ` [PATCH v3 17/18] cpufreq/amd-pstate: Rework CPPC enabling Mario Limonciello
2025-02-19 15:25 ` Gautham R. Shenoy
2025-02-19 18:05 ` Mario Limonciello
2025-02-17 22:07 ` [PATCH v3 18/18] cpufreq/amd-pstate: Stop caching EPP Mario Limonciello
2025-02-19 15:41 ` Gautham R. Shenoy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250217220707.1468365-8-superm1@kernel.org \
--to=superm1@kernel.org \
--cc=Dhananjay.Ugwekar@amd.com \
--cc=gautham.shenoy@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=perry.yuan@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.