From: <gregkh@linuxfoundation.org>
To: seanjc@google.com,vkuznets@redhat.com,zoudongjie@huawei.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] KVM: x86: Reject Hyper-V's SEND_IPI hypercalls if local APIC" failed to apply to 5.4-stable tree
Date: Tue, 18 Feb 2025 12:26:51 +0100 [thread overview]
Message-ID: <2025021851-nautical-buffoon-d8b1@gregkh> (raw)
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x a8de7f100bb5989d9c3627d3a223ee1c863f3b69
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2025021851-nautical-buffoon-d8b1@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From a8de7f100bb5989d9c3627d3a223ee1c863f3b69 Mon Sep 17 00:00:00 2001
From: Sean Christopherson <seanjc@google.com>
Date: Fri, 17 Jan 2025 16:34:51 -0800
Subject: [PATCH] KVM: x86: Reject Hyper-V's SEND_IPI hypercalls if local APIC
isn't in-kernel
Advertise support for Hyper-V's SEND_IPI and SEND_IPI_EX hypercalls if and
only if the local API is emulated/virtualized by KVM, and explicitly reject
said hypercalls if the local APIC is emulated in userspace, i.e. don't rely
on userspace to opt-in to KVM_CAP_HYPERV_ENFORCE_CPUID.
Rejecting SEND_IPI and SEND_IPI_EX fixes a NULL-pointer dereference if
Hyper-V enlightenments are exposed to the guest without an in-kernel local
APIC:
dump_stack+0xbe/0xfd
__kasan_report.cold+0x34/0x84
kasan_report+0x3a/0x50
__apic_accept_irq+0x3a/0x5c0
kvm_hv_send_ipi.isra.0+0x34e/0x820
kvm_hv_hypercall+0x8d9/0x9d0
kvm_emulate_hypercall+0x506/0x7e0
__vmx_handle_exit+0x283/0xb60
vmx_handle_exit+0x1d/0xd0
vcpu_enter_guest+0x16b0/0x24c0
vcpu_run+0xc0/0x550
kvm_arch_vcpu_ioctl_run+0x170/0x6d0
kvm_vcpu_ioctl+0x413/0xb20
__se_sys_ioctl+0x111/0x160
do_syscal1_64+0x30/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Note, checking the sending vCPU is sufficient, as the per-VM irqchip_mode
can't be modified after vCPUs are created, i.e. if one vCPU has an
in-kernel local APIC, then all vCPUs have an in-kernel local APIC.
Reported-by: Dongjie Zou <zoudongjie@huawei.com>
Fixes: 214ff83d4473 ("KVM: x86: hyperv: implement PV IPI send hypercalls")
Fixes: 2bc39970e932 ("x86/kvm/hyper-v: Introduce KVM_GET_SUPPORTED_HV_CPUID")
Cc: stable@vger.kernel.org
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250118003454.2619573-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c
index 6a6dd5a84f22..6ebeb6cea6c0 100644
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -2226,6 +2226,9 @@ static u64 kvm_hv_send_ipi(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc)
u32 vector;
bool all_cpus;
+ if (!lapic_in_kernel(vcpu))
+ return HV_STATUS_INVALID_HYPERCALL_INPUT;
+
if (hc->code == HVCALL_SEND_IPI) {
if (!hc->fast) {
if (unlikely(kvm_read_guest(kvm, hc->ingpa, &send_ipi,
@@ -2852,7 +2855,8 @@ int kvm_get_hv_cpuid(struct kvm_vcpu *vcpu, struct kvm_cpuid2 *cpuid,
ent->eax |= HV_X64_REMOTE_TLB_FLUSH_RECOMMENDED;
ent->eax |= HV_X64_APIC_ACCESS_RECOMMENDED;
ent->eax |= HV_X64_RELAXED_TIMING_RECOMMENDED;
- ent->eax |= HV_X64_CLUSTER_IPI_RECOMMENDED;
+ if (!vcpu || lapic_in_kernel(vcpu))
+ ent->eax |= HV_X64_CLUSTER_IPI_RECOMMENDED;
ent->eax |= HV_X64_EX_PROCESSOR_MASKS_RECOMMENDED;
if (evmcs_ver)
ent->eax |= HV_X64_ENLIGHTENED_VMCS_RECOMMENDED;
reply other threads:[~2025-02-18 11:27 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2025021851-nautical-buffoon-d8b1@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=seanjc@google.com \
--cc=stable@vger.kernel.org \
--cc=vkuznets@redhat.com \
--cc=zoudongjie@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.