All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Darrick J. Wong" <djwong@kernel.org>
To: Brian Foster <bfoster@redhat.com>
Cc: linux-fsdevel@vger.kernel.org, linux-xfs@vger.kernel.org,
	Christoph Hellwig <hch@infradead.org>
Subject: Re: [PATCH v2 10/12] iomap: remove unnecessary advance from iomap_iter()
Date: Wed, 19 Feb 2025 14:30:10 -0800	[thread overview]
Message-ID: <20250219223010.GE21808@frogsfrogsfrogs> (raw)
In-Reply-To: <20250219175050.83986-11-bfoster@redhat.com>

On Wed, Feb 19, 2025 at 12:50:48PM -0500, Brian Foster wrote:
> At this point, all iomap operations have been updated to advance the
> iomap_iter directly before returning to iomap_iter(). Therefore, the
> complexity of handling both the old and new semantics is no longer
> required and can be removed from iomap_iter().
> 
> Update iomap_iter() to expect success or failure status in
> iter.processed. As a precaution and developer hint to prevent
> inadvertent use of old semantics, warn on a positive return code and
> fail the operation. Remove the unnecessary advance and simplify the
> termination logic.
> 
> Signed-off-by: Brian Foster <bfoster@redhat.com>

Looks reasonable,
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>

--D

> ---
>  fs/iomap/iter.c | 39 +++++++++++++++------------------------
>  1 file changed, 15 insertions(+), 24 deletions(-)
> 
> diff --git a/fs/iomap/iter.c b/fs/iomap/iter.c
> index 0ebcabc7df52..e4dfe64029cc 100644
> --- a/fs/iomap/iter.c
> +++ b/fs/iomap/iter.c
> @@ -60,9 +60,8 @@ static inline void iomap_iter_done(struct iomap_iter *iter)
>  int iomap_iter(struct iomap_iter *iter, const struct iomap_ops *ops)
>  {
>  	bool stale = iter->iomap.flags & IOMAP_F_STALE;
> -	ssize_t advanced = iter->processed > 0 ? iter->processed : 0;
> -	u64 olen = iter->len;
> -	s64 processed;
> +	ssize_t advanced;
> +	u64 olen;
>  	int ret;
>  
>  	trace_iomap_iter(iter, ops, _RET_IP_);
> @@ -71,14 +70,11 @@ int iomap_iter(struct iomap_iter *iter, const struct iomap_ops *ops)
>  		goto begin;
>  
>  	/*
> -	 * If iter.processed is zero, the op may still have advanced the iter
> -	 * itself. Calculate the advanced and original length bytes based on how
> -	 * far pos has advanced for ->iomap_end().
> +	 * Calculate how far the iter was advanced and the original length bytes
> +	 * for ->iomap_end().
>  	 */
> -	if (!advanced) {
> -		advanced = iter->pos - iter->iter_start_pos;
> -		olen += advanced;
> -	}
> +	advanced = iter->pos - iter->iter_start_pos;
> +	olen = iter->len + advanced;
>  
>  	if (ops->iomap_end) {
>  		ret = ops->iomap_end(iter->inode, iter->iter_start_pos,
> @@ -89,27 +85,22 @@ int iomap_iter(struct iomap_iter *iter, const struct iomap_ops *ops)
>  			return ret;
>  	}
>  
> -	processed = iter->processed;
> -	if (processed < 0) {
> -		iomap_iter_reset_iomap(iter);
> -		return processed;
> -	}
> +	/* detect old return semantics where this would advance */
> +	if (WARN_ON_ONCE(iter->processed > 0))
> +		iter->processed = -EIO;
>  
>  	/*
> -	 * Advance the iter and clear state from the previous iteration. This
> -	 * passes iter->processed because that reflects the bytes processed but
> -	 * not yet advanced by the iter handler.
> -	 *
>  	 * Use iter->len to determine whether to continue onto the next mapping.
> -	 * Explicitly terminate in the case where the current iter has not
> +	 * Explicitly terminate on error status or if the current iter has not
>  	 * advanced at all (i.e. no work was done for some reason) unless the
>  	 * mapping has been marked stale and needs to be reprocessed.
>  	 */
> -	ret = iomap_iter_advance(iter, &processed);
> -	if (!ret && iter->len > 0)
> -		ret = 1;
> -	if (ret > 0 && !advanced && !stale)
> +	if (iter->processed < 0)
> +		ret = iter->processed;
> +	else if (iter->len == 0 || (!advanced && !stale))
>  		ret = 0;
> +	else
> +		ret = 1;
>  	iomap_iter_reset_iomap(iter);
>  	if (ret <= 0)
>  		return ret;
> -- 
> 2.48.1
> 
> 

  reply	other threads:[~2025-02-19 22:30 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-19 17:50 [PATCH v2 00/12] iomap: incremental advance conversion -- phase 2 Brian Foster
2025-02-19 17:50 ` [PATCH v2 01/12] iomap: advance the iter directly on buffered read Brian Foster
2025-02-19 22:22   ` Darrick J. Wong
2025-02-19 22:31     ` Darrick J. Wong
2025-02-19 17:50 ` [PATCH v2 02/12] iomap: advance the iter on direct I/O Brian Foster
2025-02-19 22:22   ` Darrick J. Wong
2025-02-19 17:50 ` [PATCH v2 03/12] iomap: convert misc simple ops to incremental advance Brian Foster
2025-02-19 22:24   ` Darrick J. Wong
2025-02-19 22:31     ` Darrick J. Wong
2025-02-19 17:50 ` [PATCH v2 04/12] dax: advance the iomap_iter in the read/write path Brian Foster
2025-02-19 22:33   ` Darrick J. Wong
2025-02-20 14:58     ` Brian Foster
2025-02-19 17:50 ` [PATCH v2 05/12] dax: push advance down into dax_iomap_iter() for read and write Brian Foster
2025-02-19 22:34   ` Darrick J. Wong
2025-02-19 17:50 ` [PATCH v2 06/12] dax: advance the iomap_iter on zero range Brian Foster
2025-02-19 22:34   ` Darrick J. Wong
2025-02-19 17:50 ` [PATCH v2 07/12] dax: advance the iomap_iter on unshare range Brian Foster
2025-02-19 22:35   ` Darrick J. Wong
2025-02-19 17:50 ` [PATCH v2 08/12] dax: advance the iomap_iter on dedupe range Brian Foster
2025-02-19 22:35   ` Darrick J. Wong
2025-02-19 17:50 ` [PATCH v2 09/12] dax: advance the iomap_iter on pte and pmd faults Brian Foster
2025-02-19 22:36   ` Darrick J. Wong
2025-02-19 17:50 ` [PATCH v2 10/12] iomap: remove unnecessary advance from iomap_iter() Brian Foster
2025-02-19 22:30   ` Darrick J. Wong [this message]
2025-02-19 17:50 ` [PATCH v2 11/12] iomap: rename iomap_iter processed field to status Brian Foster
2025-02-19 22:30   ` Darrick J. Wong
2025-02-19 17:50 ` [PATCH v2 12/12] iomap: introduce a full map advance helper Brian Foster
2025-02-19 22:31   ` Darrick J. Wong
2025-02-20  9:10 ` [PATCH v2 00/12] iomap: incremental advance conversion -- phase 2 Christian Brauner
2025-02-20 14:59   ` Brian Foster

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250219223010.GE21808@frogsfrogsfrogs \
    --to=djwong@kernel.org \
    --cc=bfoster@redhat.com \
    --cc=hch@infradead.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.