Re: [PATCH net-next v3 01/10] dt-bindings: net: ti: Adds DUAL-EMAC mode support on PRU-ICSS2 for AM57xx SOCs

[Rob Herring <robh@kernel.org>]

On Fri, Feb 14, 2025 at 11:16:53AM +0530, parvathi wrote:
> From: Parvathi Pudi <parvathi@couthit.com>
> 
> Documentation update for the newly added "pruss2_eth" device tree
> node and its dependencies along with compatibility for PRU-ICSS
> Industrial Ethernet Peripheral (IEP), PRU-ICSS Enhanced Capture
> (eCAP) peripheral and using YAML binding document for AM57xx SoCs.
> 
> Signed-off-by: Parvathi Pudi <parvathi@couthit.com>
> Signed-off-by: Basharath Hussain Khaja <basharath@couthit.com>

The sender of the patch S-o-b goes last. And maybe you want a 
Co-developed-by tag here too?

> ---
>  .../devicetree/bindings/net/ti,icss-iep.yaml  |   4 +-
>  .../bindings/net/ti,icssm-prueth.yaml         | 147 ++++++++++++++++++
>  .../bindings/net/ti,pruss-ecap.yaml           |  32 ++++
>  .../devicetree/bindings/soc/ti/ti,pruss.yaml  |   9 ++
>  4 files changed, 191 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/net/ti,icssm-prueth.yaml
>  create mode 100644 Documentation/devicetree/bindings/net/ti,pruss-ecap.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/ti,icss-iep.yaml b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml
> index e36e3a622904..858d74638167 100644
> --- a/Documentation/devicetree/bindings/net/ti,icss-iep.yaml
> +++ b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml
> @@ -8,6 +8,8 @@ title: Texas Instruments ICSS Industrial Ethernet Peripheral (IEP) module
>  
>  maintainers:
>    - Md Danish Anwar <danishanwar@ti.com>
> +  - Parvathi Pudi <parvathi@couthit.com>
> +  - Basharath Hussain Khaja <basharath@couthit.com>
>  
>  properties:
>    compatible:
> @@ -19,7 +21,7 @@ properties:
>            - const: ti,am654-icss-iep
>  
>        - const: ti,am654-icss-iep
> -
> +      - const: ti,am5728-icss-iep

Use enum adding to the prior entry.

>  
>    reg:
>      maxItems: 1
> diff --git a/Documentation/devicetree/bindings/net/ti,icssm-prueth.yaml b/Documentation/devicetree/bindings/net/ti,icssm-prueth.yaml
> new file mode 100644
> index 000000000000..1dffa6bd7a88
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/ti,icssm-prueth.yaml
> @@ -0,0 +1,147 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/ti,icssm-prueth.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments ICSSM PRUSS Ethernet
> +
> +maintainers:
> +  - Roger Quadros <rogerq@ti.com>
> +  - Andrew F. Davis <afd@ti.com>
> +  - Parvathi Pudi <parvathi@couthit.com>
> +  - Basharath Hussain Khaja <basharath@couthit.com>
> +
> +description:
> +  Ethernet based on the Programmable Real-Time Unit and Industrial
> +  Communication Subsystem.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ti,am57-prueth     # for AM57x SoC family
> +
> +  sram:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      phandle to OCMC SRAM node
> +
> +  ti,mii-rt:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      phandle to MII_RT module's syscon regmap
> +
> +  ti,iep:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      phandle to IEP (Industrial Ethernet Peripheral) for ICSS
> +
> +  ti,ecap:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      phandle to Enhanced Capture (eCAP) event for ICSS
> +
> +  interrupts:
> +    items:
> +      - description: High priority Rx Interrupt specifier.
> +      - description: Low priority Rx Interrupt specifier.
> +
> +  interrupt-names:
> +    items:
> +      - const: rx_hp
> +      - const: rx_lp
> +
> +  ethernet-ports:
> +    type: object
> +    additionalProperties: false
> +
> +    properties:
> +      '#address-cells':
> +        const: 1
> +      '#size-cells':
> +        const: 0
> +
> +    patternProperties:
> +      ^ethernet-port@[0-1]$:
> +        type: object
> +        description: ICSSM PRUETH external ports
> +        $ref: ethernet-controller.yaml#
> +        unevaluatedProperties: false
> +
> +        properties:
> +          reg:
> +            items:
> +              - enum: [0, 1]
> +            description: ICSSM PRUETH port number
> +
> +          interrupts:
> +            maxItems: 3
> +
> +          interrupt-names:
> +            items:
> +              - const: rx
> +              - const: emac_ptp_tx
> +              - const: hsr_ptp_tx
> +
> +        required:
> +          - reg
> +
> +    anyOf:
> +      - required:
> +          - ethernet-port@0
> +      - required:
> +          - ethernet-port@1
> +
> +required:
> +  - compatible
> +  - sram
> +  - ti,mii-rt
> +  - ti,iep
> +  - ti,ecap
> +  - ethernet-ports
> +  - interrupts
> +  - interrupt-names
> +
> +allOf:
> +  - $ref: /schemas/remoteproc/ti,pru-consumer.yaml#
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    /* Dual-MAC Ethernet application node on PRU-ICSS2 */
> +    pruss2_eth: pruss2-eth {

Drop unused labels.

> +      compatible = "ti,am57-prueth";
> +      ti,prus = <&pru2_0>, <&pru2_1>;
> +      sram = <&ocmcram1>;
> +      ti,mii-rt = <&pruss2_mii_rt>;
> +      ti,iep = <&pruss2_iep>;
> +      ti,ecap = <&pruss2_ecap>;
> +      interrupts = <20 2 2>, <21 3 3>;
> +      interrupt-names = "rx_hp", "rx_lp";
> +      interrupt-parent = <&pruss2_intc>;
> +
> +      ethernet-ports {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        pruss2_emac0: ethernet-port@0 {
> +          reg = <0>;
> +          phy-handle = <&pruss2_eth0_phy>;
> +          phy-mode = "mii";
> +          interrupts = <20 2 2>, <26 6 6>, <23 6 6>;
> +          interrupt-names = "rx", "emac_ptp_tx", "hsr_ptp_tx";
> +          /* Filled in by bootloader */
> +          local-mac-address = [00 00 00 00 00 00];
> +        };
> +
> +        pruss2_emac1: ethernet-port@1 {
> +          reg = <1>;
> +          phy-handle = <&pruss2_eth1_phy>;
> +          phy-mode = "mii";
> +          interrupts = <21 3 3>, <27 9 7>, <24 9 7>;
> +          interrupt-names = "rx", "emac_ptp_tx", "hsr_ptp_tx";
> +          /* Filled in by bootloader */
> +          local-mac-address = [00 00 00 00 00 00];
> +        };
> +      };
> +    };
> diff --git a/Documentation/devicetree/bindings/net/ti,pruss-ecap.yaml b/Documentation/devicetree/bindings/net/ti,pruss-ecap.yaml
> new file mode 100644
> index 000000000000..42f217099b2e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/ti,pruss-ecap.yaml
> @@ -0,0 +1,32 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/ti,pruss-ecap.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments PRU-ICSS Enhanced Capture (eCAP) event module
> +
> +maintainers:
> +  - Murali Karicheri <m-karicheri2@ti.com>
> +  - Parvathi Pudi <parvathi@couthit.com>
> +  - Basharath Hussain Khaja <basharath@couthit.com>
> +
> +properties:
> +  compatible:
> +    const: ti,pruss-ecap
> +
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    pruss2_ecap: ecap@30000 {
> +        compatible = "ti,pruss-ecap";
> +        reg = <0x30000 0x60>;
> +    };
> diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
> index 927b3200e29e..594f54264a8c 100644
> --- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
> +++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
> @@ -251,6 +251,15 @@ patternProperties:
>  
>      type: object
>  
> +  ecap@[a-f0-9]+$:
> +    description:
> +      PRU-ICSS has a Enhanced Capture (eCAP) event module which can generate
> +      and capture periodic timer based events which will be used for features
> +      like RX Pacing to rise interrupt when the timer event has occurred.
> +      Each PRU-ICSS instance has one eCAP modeule irrespective of SOCs.
> +
> +    type: object
> +
>    mii-rt@[a-f0-9]+$:
>      description: |
>        Real-Time Ethernet to support multiple industrial communication protocols.
> -- 
> 2.34.1
>