[PATCH 2/2] arm64: dts: ti: k3-j722s: fix pinctrl settings

[Michael Walle <mwalle@kernel.org>]

It appears that pinctrl-single is misused on this SoC to control both
the mux and the input and output and bias settings. This results in
non-working pinctrl configurations for GPIOs within the device tree.

This is what happens:
 (1) During startup the pinctrl settings are applied according to the
     device tree. I.e. the pin is configured as output and with
     pull-ups enabled.
 (2) During startup a device driver requests a GPIO.
 (3) pinctrl-single is applying the default GPIO setting according to
     the pinctrl-single,gpio-range property.

This would work as expected if the pinctrl-single is only controlling
the function mux, but it also controls the input/output buffer enable,
the pull-up and pull-down settings etc (pinctrl-single,function-mask
covers the entire pad setting instead of just the mux field).

Remove the pinctrl-single,gpio-range property, so that no settings are
applied during a gpio_request() call.

Fixes: 5e5c50964e2e ("arm64: dts: ti: k3-j722s: Add gpio-ranges properties")
Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 15 ---------------
 1 file changed, 15 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
index 3ac2d45a0558..6da7b3a2943c 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
@@ -251,21 +251,6 @@ &inta_main_dmss {
 	ti,interrupt-ranges = <7 71 21>;
 };
 
-&main_pmx0 {
-	pinctrl-single,gpio-range =
-		<&main_pmx0_range 0 32 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 33 38 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 72 17 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 101 25 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 137 5 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 143 3 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 149 2 PIN_GPIO_RANGE_IOPAD>;
-
-	main_pmx0_range: gpio-range {
-		#pinctrl-single,gpio-range-cells = <3>;
-	};
-};
-
 &main_gpio0 {
 	gpio-ranges = <&main_pmx0 0 0 32>, <&main_pmx0 32 33 38>,
 			<&main_pmx0 70 72 17>;
-- 
2.39.5