From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mgamail.intel.com (mgamail.intel.com [198.175.65.18]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id A1E3A18D65E for ; Fri, 21 Feb 2025 05:48:10 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=198.175.65.18 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1740116894; cv=none; b=BiIl3IrlLYT3K7t61TKGYvmeQlnhj/nSFO7WVEHi5B8ZENlI/DDMOJUzxpcLt9f8XVEBDr4GAC17U+4NFPp2DaF4aGrw8rX5n3dpcC5pkhQU0VW9Rpwkc7eKRMAvQd5It9ZEBQJN5aur9BrsGTNDgjTq5BTO/IdYH1LhHJP9t2s= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1740116894; c=relaxed/simple; bh=EDWn0x1xKb9bUTCXXqR7p1qL+4KKQLWvWs8e6aCG9cw=; h=Date:From:Cc:Subject:Message-ID:MIME-Version:Content-Type: Content-Disposition; b=s+E93VhCJFgLaKmwCQgrJIORMrbw/rT9KceAvUExP+heg/DtFZ79dg7XO1KsW6vXCnjz3WZET4g8VClkpAjGcCnKDQhRu4iQhVCx7hobQIvCwrJGfaG9UvsoQTbhD7qgVFjjh/fvvfyEoHO9z9kaQEEWL09bPSAndYo+AJBbPwk= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=intel.com; spf=pass smtp.mailfrom=intel.com; dkim=pass (2048-bit key) header.d=intel.com header.i=@intel.com header.b=hCTGYzb9; arc=none smtp.client-ip=198.175.65.18 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=intel.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=intel.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=intel.com header.i=@intel.com header.b="hCTGYzb9" DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1740116892; x=1771652892; h=date:from:cc:subject:message-id:mime-version; bh=EDWn0x1xKb9bUTCXXqR7p1qL+4KKQLWvWs8e6aCG9cw=; b=hCTGYzb94Y1XyXbfoOaD24/KC0iSrUzUef1u7ubmCRGVkWi2BuQoZ45X DUw+TEWbMeJCzuPbSRdHyuARuSqIqs+vNIdRWhiqpwvQMOVNQi9wXLyMK yhpnWDKLhpbYRxDeYgDZ2wgZCjagyQEpaaVmGHgqf0bEMqWyoKeHiaD/d /Q0b/Xzp79E+Rfsfq2pv2sEr0ousp962AvcUp22mHm+ZeBqevd+0OD2F3 oEnM4+PXMv4dmOlY/KZjtANtpWJVEf3L0zi8g1KfcOh5iYzTg7PG67ob2 31haQ9e2n1DmBtRjd60Y6XfwLD2M52mY6nMioVwujDv/JURCq9z+J8sbQ g==; X-CSE-ConnectionGUID: xlKsjP3oRJSAaYxvD7P/PA== X-CSE-MsgGUID: fuGTLCqjT/iqzBxLOLD5HQ== X-IronPort-AV: E=McAfee;i="6700,10204,11314"; a="41131947" X-IronPort-AV: E=Sophos;i="6.12,310,1728975600"; d="scan'208";a="41131947" Received: from orviesa002.jf.intel.com ([10.64.159.142]) by orvoesa110.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 20 Feb 2025 21:48:11 -0800 X-CSE-ConnectionGUID: A27MsZUGQQybRyp2Ug+UIA== X-CSE-MsgGUID: vahnayw/SBm2cSKw/HT34w== X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="6.13,303,1732608000"; d="scan'208";a="146140007" Received: from lkp-server02.sh.intel.com (HELO 76cde6cc1f07) ([10.239.97.151]) by orviesa002.jf.intel.com with ESMTP; 20 Feb 2025 21:48:09 -0800 Received: from kbuild by 76cde6cc1f07 with local (Exim 4.96) (envelope-from ) id 1tlLtO-0005AF-2n for oe-kbuild-all@lists.linux.dev; Fri, 21 Feb 2025 05:48:06 +0000 Date: Fri, 21 Feb 2025 13:47:41 +0800 From: kernel test robot Cc: oe-kbuild-all@lists.linux.dev Subject: [intel-lts:pr/57 1/1] arch/arm64/boot/dts/amlogic/meson-g12a.dtsi:108.33-129.7: Warning (unit_address_vs_reg): /soc/bus@ff600000/bus@34400/pinctrl@40: node has a unit name, but no reg property Message-ID: <202502211303.DQ3UeegO-lkp@intel.com> Precedence: bulk X-Mailing-List: oe-kbuild-all@lists.linux.dev List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline tree: https://github.com/intel/linux-intel-lts.git pr/57 head: 6fe7458ff80d33a5dba8b386c88d33ffd2ccb47d commit: 11a7bea17c9e0a36daab934d83e15a760f402147 [1/1] arm64: dts: meson: g12a: add pinctrl support controllers config: arm64-randconfig-003-20250217 (https://download.01.org/0day-ci/archive/20250221/202502211303.DQ3UeegO-lkp@intel.com/config) compiler: aarch64-linux-gcc (GCC) 14.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250221/202502211303.DQ3UeegO-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot | Closes: https://lore.kernel.org/oe-kbuild-all/202502211303.DQ3UeegO-lkp@intel.com/ dtcheck warnings: (new ones prefixed by >>) >> arch/arm64/boot/dts/amlogic/meson-g12a.dtsi:108.33-129.7: Warning (unit_address_vs_reg): /soc/bus@ff600000/bus@34400/pinctrl@40: node has a unit name, but no reg property >> arch/arm64/boot/dts/amlogic/meson-g12a.dtsi:177.28-194.7: Warning (unit_address_vs_reg): /soc/bus@ff800000/sys-ctrl@0/pinctrl@14: node has a unit name, but no reg property >> arch/arm64/boot/dts/amlogic/meson-g12a.dtsi:108.33-129.7: Warning (simple_bus_reg): /soc/bus@ff600000/bus@34400/pinctrl@40: missing or empty reg/ranges property arch/arm64/boot/dts/amlogic/meson-g12a.dtsi:78.35-81.5: Warning (unique_unit_address): /reserved-memory/secmon@5000000: duplicate unit-address (also used in node /reserved-memory/bl32@5000000) -- >> arch/arm64/boot/dts/amlogic/meson-g12a.dtsi:108.33-129.7: Warning (unit_address_vs_reg): /soc/bus@ff600000/bus@34400/pinctrl@40: node has a unit name, but no reg property >> arch/arm64/boot/dts/amlogic/meson-g12a.dtsi:177.28-194.7: Warning (unit_address_vs_reg): /soc/bus@ff800000/sys-ctrl@0/pinctrl@14: node has a unit name, but no reg property >> arch/arm64/boot/dts/amlogic/meson-g12a.dtsi:108.33-129.7: Warning (simple_bus_reg): /soc/bus@ff600000/bus@34400/pinctrl@40: missing or empty reg/ranges property vim +108 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi 10 11 / { 12 compatible = "amlogic,g12a"; 13 14 interrupt-parent = <&gic>; 15 #address-cells = <2>; 16 #size-cells = <2>; 17 18 cpus { 19 #address-cells = <0x2>; 20 #size-cells = <0x0>; 21 22 cpu0: cpu@0 { 23 device_type = "cpu"; 24 compatible = "arm,cortex-a53"; 25 reg = <0x0 0x0>; 26 enable-method = "psci"; 27 next-level-cache = <&l2>; 28 }; 29 30 cpu1: cpu@1 { 31 device_type = "cpu"; 32 compatible = "arm,cortex-a53"; 33 reg = <0x0 0x1>; 34 enable-method = "psci"; 35 next-level-cache = <&l2>; 36 }; 37 38 cpu2: cpu@2 { 39 device_type = "cpu"; 40 compatible = "arm,cortex-a53"; 41 reg = <0x0 0x2>; 42 enable-method = "psci"; 43 next-level-cache = <&l2>; 44 }; 45 46 cpu3: cpu@3 { 47 device_type = "cpu"; 48 compatible = "arm,cortex-a53"; 49 reg = <0x0 0x3>; 50 enable-method = "psci"; 51 next-level-cache = <&l2>; 52 }; 53 54 l2: l2-cache0 { 55 compatible = "cache"; 56 }; 57 }; 58 59 efuse: efuse { 60 compatible = "amlogic,meson-gxbb-efuse"; 61 clocks = <&clkc CLKID_EFUSE>; 62 #address-cells = <1>; 63 #size-cells = <1>; 64 read-only; 65 }; 66 67 psci { 68 compatible = "arm,psci-1.0"; 69 method = "smc"; 70 }; 71 72 reserved-memory { 73 #address-cells = <2>; 74 #size-cells = <2>; 75 ranges; 76 77 /* 3 MiB reserved for ARM Trusted Firmware (BL31) */ 78 secmon_reserved: secmon@5000000 { 79 reg = <0x0 0x05000000 0x0 0x300000>; 80 no-map; 81 }; 82 }; 83 84 sm: secure-monitor { 85 compatible = "amlogic,meson-gxbb-sm"; 86 }; 87 88 soc { 89 compatible = "simple-bus"; 90 #address-cells = <2>; 91 #size-cells = <2>; 92 ranges; 93 94 apb: bus@ff600000 { 95 compatible = "simple-bus"; 96 reg = <0x0 0xff600000 0x0 0x200000>; 97 #address-cells = <2>; 98 #size-cells = <2>; 99 ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>; 100 101 periphs: bus@34400 { 102 compatible = "simple-bus"; 103 reg = <0x0 0x34400 0x0 0x400>; 104 #address-cells = <2>; 105 #size-cells = <2>; 106 ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>; 107 > 108 periphs_pinctrl: pinctrl@40 { 109 compatible = "amlogic,meson-g12a-periphs-pinctrl"; 110 #address-cells = <2>; 111 #size-cells = <2>; 112 ranges; 113 114 gpio: bank@40 { 115 reg = <0x0 0x40 0x0 0x4c>, 116 <0x0 0xe8 0x0 0x18>, 117 <0x0 0x120 0x0 0x18>, 118 <0x0 0x2c0 0x0 0x40>, 119 <0x0 0x340 0x0 0x1c>; 120 reg-names = "gpio", 121 "pull", 122 "pull-enable", 123 "mux", 124 "ds"; 125 gpio-controller; 126 #gpio-cells = <2>; 127 gpio-ranges = <&periphs_pinctrl 0 0 86>; 128 }; 129 }; 130 }; 131 132 hiu: bus@3c000 { 133 compatible = "simple-bus"; 134 reg = <0x0 0x3c000 0x0 0x1400>; 135 #address-cells = <2>; 136 #size-cells = <2>; 137 ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>; 138 139 hhi: system-controller@0 { 140 compatible = "amlogic,meson-gx-hhi-sysctrl", 141 "simple-mfd", "syscon"; 142 reg = <0 0 0 0x400>; 143 144 clkc: clock-controller { 145 compatible = "amlogic,g12a-clkc"; 146 #clock-cells = <1>; 147 clocks = <&xtal>; 148 clock-names = "xtal"; 149 }; 150 }; 151 }; 152 }; 153 154 aobus: bus@ff800000 { 155 compatible = "simple-bus"; 156 reg = <0x0 0xff800000 0x0 0x100000>; 157 #address-cells = <2>; 158 #size-cells = <2>; 159 ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; 160 161 rti: sys-ctrl@0 { 162 compatible = "amlogic,meson-gx-ao-sysctrl", 163 "simple-mfd", "syscon"; 164 reg = <0x0 0x0 0x0 0x100>; 165 #address-cells = <2>; 166 #size-cells = <2>; 167 ranges = <0x0 0x0 0x0 0x0 0x0 0x100>; 168 169 clkc_AO: clock-controller { 170 compatible = "amlogic,meson-g12a-aoclkc"; 171 #clock-cells = <1>; 172 #reset-cells = <1>; 173 clocks = <&xtal>, <&clkc CLKID_CLK81>; 174 clock-names = "xtal", "mpeg-clk"; 175 }; 176 > 177 ao_pinctrl: pinctrl@14 { 178 compatible = "amlogic,meson-g12a-aobus-pinctrl"; 179 #address-cells = <2>; 180 #size-cells = <2>; 181 ranges; 182 183 gpio_ao: bank@14 { 184 reg = <0x0 0x14 0x0 0x8>, 185 <0x0 0x1c 0x0 0x8>, 186 <0x0 0x24 0x0 0x14>; 187 reg-names = "mux", 188 "ds", 189 "gpio"; 190 gpio-controller; 191 #gpio-cells = <2>; 192 gpio-ranges = <&ao_pinctrl 0 0 15>; 193 }; 194 }; 195 }; 196 197 sec_AO: ao-secure@140 { 198 compatible = "amlogic,meson-gx-ao-secure", "syscon"; 199 reg = <0x0 0x140 0x0 0x140>; 200 amlogic,has-chip-id; 201 }; 202 203 uart_AO: serial@3000 { 204 compatible = "amlogic,meson-gx-uart", 205 "amlogic,meson-ao-uart"; 206 reg = <0x0 0x3000 0x0 0x18>; 207 interrupts = ; 208 clocks = <&xtal>, <&xtal>, <&xtal>; 209 clock-names = "xtal", "pclk", "baud"; 210 status = "disabled"; 211 }; 212 213 uart_AO_B: serial@4000 { 214 compatible = "amlogic,meson-gx-uart", 215 "amlogic,meson-ao-uart"; 216 reg = <0x0 0x4000 0x0 0x18>; 217 interrupts = ; 218 clocks = <&xtal>, <&xtal>, <&xtal>; 219 clock-names = "xtal", "pclk", "baud"; 220 status = "disabled"; 221 }; 222 }; 223 224 gic: interrupt-controller@ffc01000 { 225 compatible = "arm,gic-400"; 226 reg = <0x0 0xffc01000 0 0x1000>, 227 <0x0 0xffc02000 0 0x2000>, 228 <0x0 0xffc04000 0 0x2000>, 229 <0x0 0xffc06000 0 0x2000>; 230 interrupt-controller; 231 interrupts = ; 233 #interrupt-cells = <3>; 234 #address-cells = <0>; 235 }; 236 237 cbus: bus@ffd00000 { 238 compatible = "simple-bus"; 239 reg = <0x0 0xffd00000 0x0 0x100000>; 240 #address-cells = <2>; 241 #size-cells = <2>; 242 ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>; 243 244 clk_msr: clock-measure@18000 { 245 compatible = "amlogic,meson-g12a-clk-measure"; 246 reg = <0x0 0x18000 0x0 0x10>; 247 }; 248 }; 249 }; 250 251 timer { 252 compatible = "arm,armv8-timer"; 253 interrupts = , 255 , 257 , 259 ; 261 }; 262 263 xtal: xtal-clk { 264 compatible = "fixed-clock"; 265 clock-frequency = <24000000>; 266 clock-output-names = "xtal"; 267 #clock-cells = <0>; 268 }; 269 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki