All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrew Jones <andrew.jones@linux.dev>
To: kvm-riscv@lists.infradead.org
Cc: atishp@rivosinc.com, cleger@rivosinc.com, jamestiotio@gmail.com
Subject: [kvm-unit-tests PATCH 02/10] riscv: sbi: Ensure we have IPIs enabled for HSM suspend tests
Date: Fri, 21 Feb 2025 16:55:36 +0100	[thread overview]
Message-ID: <20250221155533.123418-14-andrew.jones@linux.dev> (raw)
In-Reply-To: <20250221155533.123418-12-andrew.jones@linux.dev>

We'll start cleaning up after each test, so the HSM tests need to
ensure they have IPIs setup themselves since they plan to use them.

Signed-off-by: Andrew Jones <andrew.jones@linux.dev>
---
 riscv/sbi.c | 62 ++++++++++++++++++++++++++++++++---------------------
 1 file changed, 37 insertions(+), 25 deletions(-)

diff --git a/riscv/sbi.c b/riscv/sbi.c
index 7c7a2d2ddddb..d7bf758e23fb 100644
--- a/riscv/sbi.c
+++ b/riscv/sbi.c
@@ -62,7 +62,7 @@ static struct sbiret sbi_dbcn_write_byte(uint8_t byte)
 	return sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE_BYTE, byte, 0, 0, 0, 0, 0);
 }
 
-static struct sbiret sbi_hart_suspend(uint32_t suspend_type, unsigned long resume_addr, unsigned long opaque)
+static struct sbiret sbi_hart_suspend_raw(unsigned long suspend_type, unsigned long resume_addr, unsigned long opaque)
 {
 	return sbi_ecall(SBI_EXT_HSM, SBI_EXT_HSM_HART_SUSPEND, suspend_type, resume_addr, opaque, 0, 0, 0);
 }
@@ -568,59 +568,71 @@ static void hart_start_invalid_hartid(void *data)
 		sbi_hsm_invalid_hartid_check = true;
 }
 
-static void hart_retentive_suspend(void *data)
+static void ipi_nop(struct pt_regs *regs)
+{
+	ipi_ack();
+}
+
+static void hart_suspend_and_wait_ipi(unsigned long suspend_type, unsigned long resume_addr,
+				      unsigned long opaque, bool returns, const char *typestr)
 {
 	unsigned long hartid = current_thread_info()->hartid;
-	struct sbiret ret = sbi_hart_suspend(SBI_EXT_HSM_HART_SUSPEND_RETENTIVE, 0, 0);
+	struct sbiret ret;
 
+	install_irq_handler(IRQ_S_SOFT, ipi_nop);
+	local_ipi_enable();
+	local_irq_enable();
+
+	ret = sbi_hart_suspend_raw(suspend_type, resume_addr, opaque);
 	if (ret.error)
-		report_fail("failed to retentive suspend cpu%d (hartid = %lx) (error=%ld)",
-			    smp_processor_id(), hartid, ret.error);
+		report_fail("failed to %s cpu%d (hartid = %lx) (error=%ld)",
+			    typestr, smp_processor_id(), hartid, ret.error);
+	else if (!returns)
+		report_fail("failed to %s cpu%d (hartid = %lx) (call should not return)",
+			    typestr, smp_processor_id(), hartid);
+
+	local_irq_disable();
+	local_ipi_disable();
+	install_irq_handler(IRQ_S_SOFT, NULL);
+}
+
+static void hart_retentive_suspend(void *data)
+{
+	hart_suspend_and_wait_ipi(SBI_EXT_HSM_HART_SUSPEND_RETENTIVE, 0, 0, true, "retentive suspend");
 }
 
 static void hart_non_retentive_suspend(void *data)
 {
-	unsigned long hartid = current_thread_info()->hartid;
 	unsigned long params[] = {
 		[SBI_HSM_MAGIC_IDX] = SBI_HSM_MAGIC,
-		[SBI_HSM_HARTID_IDX] = hartid,
+		[SBI_HSM_HARTID_IDX] = current_thread_info()->hartid,
 	};
-	struct sbiret ret = sbi_hart_suspend(SBI_EXT_HSM_HART_SUSPEND_NON_RETENTIVE,
-					     virt_to_phys(&sbi_hsm_check_non_retentive_suspend),
-					     virt_to_phys(params));
 
-	report_fail("failed to non-retentive suspend cpu%d (hartid = %lx) (error=%ld)",
-		    smp_processor_id(), hartid, ret.error);
+	hart_suspend_and_wait_ipi(SBI_EXT_HSM_HART_SUSPEND_NON_RETENTIVE,
+				  virt_to_phys(&sbi_hsm_check_non_retentive_suspend), virt_to_phys(params),
+				  false, "non-retentive suspend");
 }
 
 /* This test function is only being run on RV64 to verify that upper bits of suspend_type are ignored */
 static void hart_retentive_suspend_with_msb_set(void *data)
 {
-	unsigned long hartid = current_thread_info()->hartid;
 	unsigned long suspend_type = SBI_EXT_HSM_HART_SUSPEND_RETENTIVE | (_AC(1, UL) << (__riscv_xlen - 1));
-	struct sbiret ret = sbi_ecall(SBI_EXT_HSM, SBI_EXT_HSM_HART_SUSPEND, suspend_type, 0, 0, 0, 0, 0);
 
-	if (ret.error)
-		report_fail("failed to retentive suspend cpu%d (hartid = %lx) with MSB set (error=%ld)",
-			    smp_processor_id(), hartid, ret.error);
+	hart_suspend_and_wait_ipi(suspend_type, 0, 0, true, "retentive suspend with MSB set");
 }
 
 /* This test function is only being run on RV64 to verify that upper bits of suspend_type are ignored */
 static void hart_non_retentive_suspend_with_msb_set(void *data)
 {
-	unsigned long hartid = current_thread_info()->hartid;
 	unsigned long suspend_type = SBI_EXT_HSM_HART_SUSPEND_NON_RETENTIVE | (_AC(1, UL) << (__riscv_xlen - 1));
 	unsigned long params[] = {
 		[SBI_HSM_MAGIC_IDX] = SBI_HSM_MAGIC,
-		[SBI_HSM_HARTID_IDX] = hartid,
+		[SBI_HSM_HARTID_IDX] = current_thread_info()->hartid,
 	};
 
-	struct sbiret ret = sbi_ecall(SBI_EXT_HSM, SBI_EXT_HSM_HART_SUSPEND, suspend_type,
-				      virt_to_phys(&sbi_hsm_check_non_retentive_suspend), virt_to_phys(params),
-				      0, 0, 0);
-
-	report_fail("failed to non-retentive suspend cpu%d (hartid = %lx) with MSB set (error=%ld)",
-		    smp_processor_id(), hartid, ret.error);
+	hart_suspend_and_wait_ipi(suspend_type,
+				  virt_to_phys(&sbi_hsm_check_non_retentive_suspend), virt_to_phys(params),
+				  false, "non-retentive suspend with MSB set");
 }
 
 static bool hart_wait_on_status(unsigned long hartid, enum sbi_ext_hsm_sid status, unsigned long duration)
-- 
2.48.1


-- 
kvm-riscv mailing list
kvm-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kvm-riscv

  parent reply	other threads:[~2025-02-21 15:55 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-21 15:55 [kvm-unit-tests PATCH 00/10] riscv: sbi: Test improvements and a couple new Andrew Jones
2025-02-21 15:55 ` [kvm-unit-tests PATCH 01/10] riscv: sbi: Mark known fwft failures as kfails Andrew Jones
2025-02-24 16:53   ` Clément Léger
2025-02-25 10:14   ` Clément Léger
2025-02-25 10:25     ` Andrew Jones
2025-02-25 15:32       ` Andrew Jones
2025-02-25 15:48         ` Clément Léger
2025-02-26 18:01           ` Andrew Jones
2025-02-21 15:55 ` Andrew Jones [this message]
2025-02-21 15:55 ` [kvm-unit-tests PATCH 03/10] riscv: sbi: Ensure SUSP test gets an interrupt Andrew Jones
2025-02-21 15:55 ` [kvm-unit-tests PATCH 04/10] riscv: sbi: Improve susp expected error output Andrew Jones
2025-02-21 15:55 ` [kvm-unit-tests PATCH 05/10] riscv: sbi: Improve interrupt handling cleanup Andrew Jones
2025-02-21 15:55 ` [kvm-unit-tests PATCH 06/10] lib/cpumask: Add some operators Andrew Jones
2025-02-21 15:55 ` [kvm-unit-tests PATCH 07/10] riscv: sbi: HSM suspend may not be supported Andrew Jones
2025-02-21 15:55 ` [kvm-unit-tests PATCH 08/10] riscv: sbi: Probe/skip SUSP Andrew Jones
2025-02-25 15:16   ` Clément Léger
2025-02-21 15:55 ` [kvm-unit-tests PATCH 09/10] riscv: sbi: susp: Check upper bits of sleep_type are ignored Andrew Jones
2025-02-25 15:20   ` Clément Léger
2025-02-21 15:55 ` [kvm-unit-tests PATCH 10/10] riscv: sbi: Add bad fid tests Andrew Jones
2025-02-26 17:59 ` [kvm-unit-tests PATCH 11/10] riscv: sbi: Add fwft pte_hw_ad_updating test Andrew Jones
2025-02-27  9:09   ` Clément Léger
2025-02-27 12:07     ` Andrew Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250221155533.123418-14-andrew.jones@linux.dev \
    --to=andrew.jones@linux.dev \
    --cc=atishp@rivosinc.com \
    --cc=cleger@rivosinc.com \
    --cc=jamestiotio@gmail.com \
    --cc=kvm-riscv@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.