From: Bernhard Beschow <shentey@gmail.com>
To: qemu-devel@nongnu.org
Cc: "Paolo Bonzini" <pbonzini@redhat.com>,
"Jean-Christophe Dubois" <jcd@tribudubois.net>,
qemu-arm@nongnu.org, "Peter Maydell" <peter.maydell@linaro.org>,
"Marc-André Lureau" <marcandre.lureau@redhat.com>,
"Laurent Vivier" <lvivier@redhat.com>,
"Andrey Smirnov" <andrew.smirnov@gmail.com>,
"Bernhard Beschow" <shentey@gmail.com>,
"Fabiano Rosas" <farosas@suse.de>,
"Alistair Francis" <alistair@alistair23.me>,
"Edgar E. Iglesias" <edgar.iglesias@gmail.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>
Subject: [PATCH v2 11/18] hw/arm/fsl-imx8mp: Add SPI controllers
Date: Sun, 23 Feb 2025 12:47:01 +0100 [thread overview]
Message-ID: <20250223114708.1780-12-shentey@gmail.com> (raw)
In-Reply-To: <20250223114708.1780-1-shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
---
docs/system/arm/imx8mp-evk.rst | 1 +
include/hw/arm/fsl-imx8mp.h | 8 ++++++++
hw/arm/fsl-imx8mp.c | 26 ++++++++++++++++++++++++++
3 files changed, 35 insertions(+)
diff --git a/docs/system/arm/imx8mp-evk.rst b/docs/system/arm/imx8mp-evk.rst
index ef0d997250..66e5865107 100644
--- a/docs/system/arm/imx8mp-evk.rst
+++ b/docs/system/arm/imx8mp-evk.rst
@@ -16,6 +16,7 @@ The ``imx8mp-evk`` machine implements the following devices:
* 1 Designware PCI Express Controller
* 5 GPIO Controllers
* 6 I2C Controllers
+ * 3 SPI Controllers
* Secure Non-Volatile Storage (SNVS) including an RTC
* Clock Tree
diff --git a/include/hw/arm/fsl-imx8mp.h b/include/hw/arm/fsl-imx8mp.h
index 2590056627..296a87eb50 100644
--- a/include/hw/arm/fsl-imx8mp.h
+++ b/include/hw/arm/fsl-imx8mp.h
@@ -20,6 +20,7 @@
#include "hw/pci-host/designware.h"
#include "hw/pci-host/fsl_imx8m_phy.h"
#include "hw/sd/sdhci.h"
+#include "hw/ssi/imx_spi.h"
#include "qom/object.h"
#include "qemu/units.h"
@@ -31,6 +32,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(FslImx8mpState, FSL_IMX8MP)
enum FslImx8mpConfiguration {
FSL_IMX8MP_NUM_CPUS = 4,
+ FSL_IMX8MP_NUM_ECSPIS = 3,
FSL_IMX8MP_NUM_GPIOS = 5,
FSL_IMX8MP_NUM_I2CS = 6,
FSL_IMX8MP_NUM_IRQS = 160,
@@ -47,6 +49,7 @@ struct FslImx8mpState {
IMX8MPCCMState ccm;
IMX8MPAnalogState analog;
IMX7SNVSState snvs;
+ IMXSPIState spi[FSL_IMX8MP_NUM_ECSPIS];
IMXI2CState i2c[FSL_IMX8MP_NUM_I2CS];
IMXSerialState uart[FSL_IMX8MP_NUM_UARTS];
SDHCIState usdhc[FSL_IMX8MP_NUM_USDHCS];
@@ -208,6 +211,11 @@ enum FslImx8mpIrqs {
FSL_IMX8MP_UART5_IRQ = 30,
FSL_IMX8MP_UART6_IRQ = 16,
+ FSL_IMX8MP_ECSPI1_IRQ = 31,
+ FSL_IMX8MP_ECSPI2_IRQ = 32,
+ FSL_IMX8MP_ECSPI3_IRQ = 33,
+ FSL_IMX8MP_ECSPI4_IRQ = 34,
+
FSL_IMX8MP_I2C1_IRQ = 35,
FSL_IMX8MP_I2C2_IRQ = 36,
FSL_IMX8MP_I2C3_IRQ = 37,
diff --git a/hw/arm/fsl-imx8mp.c b/hw/arm/fsl-imx8mp.c
index 3da81e28ca..14f317be70 100644
--- a/hw/arm/fsl-imx8mp.c
+++ b/hw/arm/fsl-imx8mp.c
@@ -223,6 +223,11 @@ static void fsl_imx8mp_init(Object *obj)
object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
}
+ for (i = 0; i < FSL_IMX8MP_NUM_ECSPIS; i++) {
+ g_autofree char *name = g_strdup_printf("spi%d", i + 1);
+ object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI);
+ }
+
object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST);
object_initialize_child(obj, "pcie_phy", &s->pcie_phy,
TYPE_FSL_IMX8M_PCIE_PHY);
@@ -459,6 +464,26 @@ static void fsl_imx8mp_realize(DeviceState *dev, Error **errp)
qdev_get_gpio_in(gicdev, usdhc_table[i].irq));
}
+ /* ECSPIs */
+ for (i = 0; i < FSL_IMX8MP_NUM_ECSPIS; i++) {
+ static const struct {
+ hwaddr addr;
+ unsigned int irq;
+ } spi_table[FSL_IMX8MP_NUM_ECSPIS] = {
+ { fsl_imx8mp_memmap[FSL_IMX8MP_ECSPI1].addr, FSL_IMX8MP_ECSPI1_IRQ },
+ { fsl_imx8mp_memmap[FSL_IMX8MP_ECSPI2].addr, FSL_IMX8MP_ECSPI2_IRQ },
+ { fsl_imx8mp_memmap[FSL_IMX8MP_ECSPI3].addr, FSL_IMX8MP_ECSPI3_IRQ },
+ };
+
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) {
+ return;
+ }
+
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_table[i].addr);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
+ qdev_get_gpio_in(gicdev, spi_table[i].irq));
+ }
+
/* SNVS */
if (!sysbus_realize(SYS_BUS_DEVICE(&s->snvs), errp)) {
return;
@@ -498,6 +523,7 @@ static void fsl_imx8mp_realize(DeviceState *dev, Error **errp)
case FSL_IMX8MP_GIC_DIST:
case FSL_IMX8MP_GIC_REDIST:
case FSL_IMX8MP_GPIO1 ... FSL_IMX8MP_GPIO5:
+ case FSL_IMX8MP_ECSPI1 ... FSL_IMX8MP_ECSPI3:
case FSL_IMX8MP_I2C1 ... FSL_IMX8MP_I2C6:
case FSL_IMX8MP_PCIE1:
case FSL_IMX8MP_PCIE_PHY1:
--
2.48.1
next prev parent reply other threads:[~2025-02-23 11:50 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-23 11:46 [PATCH v2 00/18] Add i.MX 8M Plus EVK machine Bernhard Beschow
2025-02-23 11:46 ` [PATCH v2 01/18] hw/usb/hcd-dwc3: Align global registers size with Linux Bernhard Beschow
2025-02-23 11:46 ` [PATCH v2 02/18] hw/pci-host/designware: Prevent device attachment on internal PCIe root bus Bernhard Beschow
2025-02-23 11:46 ` [PATCH v2 03/18] hw/gpio/pca955*: Move Kconfig switches next to implementations Bernhard Beschow
2025-02-25 14:15 ` Peter Maydell
2025-02-23 11:46 ` [PATCH v2 04/18] hw/arm: Add i.MX 8M Plus EVK board Bernhard Beschow
2025-02-25 14:19 ` Peter Maydell
2025-02-25 15:42 ` Peter Maydell
2025-02-25 17:00 ` Peter Maydell
2025-02-26 6:36 ` Bernhard Beschow
2025-02-26 11:53 ` Peter Maydell
2025-02-26 6:55 ` Bernhard Beschow
2025-02-23 11:46 ` [PATCH v2 05/18] hw/arm/fsl-imx8mp: Implement clock tree Bernhard Beschow
2025-02-25 14:21 ` Peter Maydell
2025-02-23 11:46 ` [PATCH v2 06/18] hw/arm/fsl-imx8mp: Add SNVS Bernhard Beschow
2025-02-23 11:46 ` [PATCH v2 07/18] hw/arm/fsl-imx8mp: Add USDHC storage controllers Bernhard Beschow
2025-02-23 11:46 ` [PATCH v2 08/18] hw/arm/fsl-imx8mp: Add PCIe support Bernhard Beschow
2025-02-25 14:22 ` Peter Maydell
2025-02-23 11:46 ` [PATCH v2 09/18] hw/arm/fsl-imx8mp: Add GPIO controllers Bernhard Beschow
2025-02-23 11:47 ` [PATCH v2 10/18] hw/arm/fsl-imx8mp: Add I2C controllers Bernhard Beschow
2025-02-23 11:47 ` Bernhard Beschow [this message]
2025-02-23 11:47 ` [PATCH v2 12/18] hw/arm/fsl-imx8mp: Add watchdog support Bernhard Beschow
2025-02-23 11:47 ` [PATCH v2 13/18] hw/arm/fsl-imx8mp: Implement general purpose timers Bernhard Beschow
2025-02-23 11:47 ` [PATCH v2 14/18] hw/arm/fsl-imx8mp: Add Ethernet controller Bernhard Beschow
2025-02-23 11:47 ` [PATCH v2 15/18] hw/arm/fsl-imx8mp: Add USB support Bernhard Beschow
2025-02-23 11:47 ` [PATCH v2 16/18] hw/arm/fsl-imx8mp: Add boot ROM Bernhard Beschow
2025-02-25 14:29 ` Peter Maydell
2025-02-25 18:48 ` Bernhard Beschow
2025-02-23 11:47 ` [PATCH v2 17/18] hw/arm/fsl-imx8mp: Add on-chip RAM Bernhard Beschow
2025-02-23 11:47 ` [PATCH v2 18/18] hw/rtc: Add Ricoh RS5C372 RTC emulation Bernhard Beschow
2025-03-04 18:53 ` Bernhard Beschow
2025-03-07 19:18 ` Bernhard Beschow
2025-03-11 7:34 ` Bernhard Beschow
2025-03-11 9:20 ` Philippe Mathieu-Daudé
2025-03-11 15:49 ` Corey Minyard
2025-03-11 16:01 ` Philippe Mathieu-Daudé
2025-03-11 12:18 ` Fabiano Rosas
2025-02-25 14:43 ` [PATCH v2 00/18] Add i.MX 8M Plus EVK machine Peter Maydell
2025-02-25 19:00 ` Bernhard Beschow
-- strict thread matches above, loose matches on Subject: below --
2025-02-04 9:20 Bernhard Beschow
2025-02-04 9:21 ` [PATCH v2 11/18] hw/arm/fsl-imx8mp: Add SPI controllers Bernhard Beschow
2025-02-06 17:26 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250223114708.1780-12-shentey@gmail.com \
--to=shentey@gmail.com \
--cc=alistair@alistair23.me \
--cc=andrew.smirnov@gmail.com \
--cc=edgar.iglesias@gmail.com \
--cc=farosas@suse.de \
--cc=jcd@tribudubois.net \
--cc=lvivier@redhat.com \
--cc=marcandre.lureau@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.