FAILED: patch "[PATCH] drm: panel: jd9365da-h3: fix reset signal polarity" failed to apply to 6.6-stable tree

[<gregkh@linuxfoundation.org>]

The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x a8972d5a49b408248294b5ecbdd0a085e4726349
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2025022441-stallion-given-47fc@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From a8972d5a49b408248294b5ecbdd0a085e4726349 Mon Sep 17 00:00:00 2001
From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Date: Fri, 27 Sep 2024 09:53:05 -0400
Subject: [PATCH] drm: panel: jd9365da-h3: fix reset signal polarity

In jadard_prepare() a reset pulse is generated with the following
statements (delays ommited for clarity):

    gpiod_set_value(jadard->reset, 1); --> Deassert reset
    gpiod_set_value(jadard->reset, 0); --> Assert reset for 10ms
    gpiod_set_value(jadard->reset, 1); --> Deassert reset

However, specifying second argument of "0" to gpiod_set_value() means to
deassert the GPIO, and "1" means to assert it. If the reset signal is
defined as GPIO_ACTIVE_LOW in the DTS, the above statements will
incorrectly generate the reset pulse (inverted) and leave it asserted
(LOW) at the end of jadard_prepare().

Fix reset behavior by inverting gpiod_set_value() second argument
in jadard_prepare(). Also modify second argument to devm_gpiod_get()
in jadard_dsi_probe() to assert the reset when probing.

Do not modify it in jadard_unprepare() as it is already properly
asserted with "1", which seems to be the intended behavior.

Fixes: 6b818c533dd8 ("drm: panel: Add Jadard JD9365DA-H3 DSI panel")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240927135306.857617-1-hugo@hugovil.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927135306.857617-1-hugo@hugovil.com

diff --git a/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c b/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c
index 45d09e6fa667..7d68a8acfe2e 100644
--- a/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c
+++ b/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c
@@ -109,13 +109,13 @@ static int jadard_prepare(struct drm_panel *panel)
 	if (jadard->desc->lp11_to_reset_delay_ms)
 		msleep(jadard->desc->lp11_to_reset_delay_ms);
 
-	gpiod_set_value(jadard->reset, 1);
+	gpiod_set_value(jadard->reset, 0);
 	msleep(5);
 
-	gpiod_set_value(jadard->reset, 0);
+	gpiod_set_value(jadard->reset, 1);
 	msleep(10);
 
-	gpiod_set_value(jadard->reset, 1);
+	gpiod_set_value(jadard->reset, 0);
 	msleep(130);
 
 	ret = jadard->desc->init(jadard);
@@ -1130,7 +1130,7 @@ static int jadard_dsi_probe(struct mipi_dsi_device *dsi)
 	dsi->format = desc->format;
 	dsi->lanes = desc->lanes;
 
-	jadard->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	jadard->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(jadard->reset)) {
 		DRM_DEV_ERROR(&dsi->dev, "failed to get our reset GPIO\n");
 		return PTR_ERR(jadard->reset);