From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,xiubli@redhat.com,tiwai@suse.de,tiwai@suse.com,sre@kernel.org,Shyam-sundar.S-k@amd.com,shawnguo@kernel.org,s.hauer@pengutronix.de,selvin.xavier@broadcom.com,sagi@grimberg.me,perex@perex.cz,ogabbay@kernel.org,nicolas.palix@imag.fr,mkl@pengutronix.de,martin.petersen@oracle.com,leon@kernel.org,kbusch@kernel.org,kalesh-anakkur.purayil@broadcom.com,julia.lawall@inria.fr,josef@toxicpanda.com,jgg@ziepe.ca,james.smart@broadcom.com,james.bottomley@HansenPartnership.com,ilpo.jarvinen@linux.intel.com,idryomov@gmail.com,hmh@hmh.eng.br,hdegoede@redhat.com,hch@lst.de,frank.li@nxp.com,festevam@gmail.com,dsterba@suse.com,dongsheng.yang@easystack.cn,dlemoal@kernel.org,djwong@kernel.org,dick.kennedy@broadcom.com,cmaiolino@redhat.com,clm@fb.com,cem@kernel.org,cassel@kernel.org,broonie@kernel.org,axboe@kernel.dk,eahariha@linux.microsoft.com,akpm@linux-foundation.org
Subject: + scsi-lpfc-convert-timeouts-to-secs_to_jiffies.patch added to mm-nonmm-unstable branch
Date: Tue, 25 Feb 2025 14:40:01 -0800 [thread overview]
Message-ID: <20250225224002.72001C4CEDD@smtp.kernel.org> (raw)
The patch titled
Subject: scsi: lpfc: convert timeouts to secs_to_jiffies()
has been added to the -mm mm-nonmm-unstable branch. Its filename is
scsi-lpfc-convert-timeouts-to-secs_to_jiffies.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches/scsi-lpfc-convert-timeouts-to-secs_to_jiffies.patch
This patch will later appear in the mm-nonmm-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days
------------------------------------------------------
From: Easwar Hariharan <eahariha@linux.microsoft.com>
Subject: scsi: lpfc: convert timeouts to secs_to_jiffies()
Date: Tue, 25 Feb 2025 20:17:16 +0000
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the
multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies(E * 1000)
+secs_to_jiffies(E)
-msecs_to_jiffies(E * MSEC_PER_SEC)
+secs_to_jiffies(E)
While here, convert some timeouts that are denominated in seconds
manually.
Link: https://lkml.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-2-a43967e36c88@linux.microsoft.com
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Maol <dlemoal@kernel.org>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Dongsheng Yang <dongsheng.yang@easystack.cn>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Frank Li <frank.li@nxp.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: James Bottomley <james.bottomley@HansenPartnership.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Niklas Cassel <cassel@kernel.org>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Shyam-sundar S-k <Shyam-sundar.S-k@amd.com>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/scsi/lpfc/lpfc.h | 3 --
drivers/scsi/lpfc/lpfc_els.c | 11 +++----
drivers/scsi/lpfc/lpfc_hbadisc.c | 2 -
drivers/scsi/lpfc/lpfc_init.c | 10 +++----
drivers/scsi/lpfc/lpfc_scsi.c | 12 +++-----
drivers/scsi/lpfc/lpfc_sli.c | 41 +++++++++++------------------
drivers/scsi/lpfc/lpfc_vport.c | 2 -
7 files changed, 34 insertions(+), 47 deletions(-)
--- a/drivers/scsi/lpfc/lpfc_els.c~scsi-lpfc-convert-timeouts-to-secs_to_jiffies
+++ a/drivers/scsi/lpfc/lpfc_els.c
@@ -8045,8 +8045,7 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vpo
if (test_bit(FC_DISC_TMO, &vport->fc_flag)) {
tmo = ((phba->fc_ratov * 3) + 3);
mod_timer(&vport->fc_disctmo,
- jiffies +
- msecs_to_jiffies(1000 * tmo));
+ jiffies + secs_to_jiffies(tmo));
}
return 0;
}
@@ -8081,7 +8080,7 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vpo
if (test_bit(FC_DISC_TMO, &vport->fc_flag)) {
tmo = ((phba->fc_ratov * 3) + 3);
mod_timer(&vport->fc_disctmo,
- jiffies + msecs_to_jiffies(1000 * tmo));
+ jiffies + secs_to_jiffies(tmo));
}
if ((rscn_cnt < FC_MAX_HOLD_RSCN) &&
!test_bit(FC_RSCN_DISCOVERY, &vport->fc_flag)) {
@@ -9511,7 +9510,7 @@ lpfc_els_timeout_handler(struct lpfc_vpo
if (!list_empty(&pring->txcmplq))
if (!test_bit(FC_UNLOADING, &phba->pport->load_flag))
mod_timer(&vport->els_tmofunc,
- jiffies + msecs_to_jiffies(1000 * timeout));
+ jiffies + secs_to_jiffies(timeout));
}
/**
@@ -10899,7 +10898,7 @@ lpfc_do_scr_ns_plogi(struct lpfc_hba *ph
"3334 Delay fc port discovery for %d secs\n",
phba->fc_ratov);
mod_timer(&vport->delayed_disc_tmo,
- jiffies + msecs_to_jiffies(1000 * phba->fc_ratov));
+ jiffies + secs_to_jiffies(phba->fc_ratov));
return;
}
@@ -11156,7 +11155,7 @@ lpfc_retry_pport_discovery(struct lpfc_h
if (!ndlp)
return;
- mod_timer(&ndlp->nlp_delayfunc, jiffies + msecs_to_jiffies(1000));
+ mod_timer(&ndlp->nlp_delayfunc, jiffies + secs_to_jiffies(1));
set_bit(NLP_DELAY_TMO, &ndlp->nlp_flag);
ndlp->nlp_last_elscmd = ELS_CMD_FLOGI;
phba->pport->port_state = LPFC_FLOGI;
--- a/drivers/scsi/lpfc/lpfc.h~scsi-lpfc-convert-timeouts-to-secs_to_jiffies
+++ a/drivers/scsi/lpfc/lpfc.h
@@ -74,8 +74,7 @@ struct lpfc_sli2_slim;
* queue depths when there are driver resource error or Firmware
* resource error.
*/
-/* 1 Second */
-#define QUEUE_RAMP_DOWN_INTERVAL (msecs_to_jiffies(1000 * 1))
+#define QUEUE_RAMP_DOWN_INTERVAL (secs_to_jiffies(1))
/* Number of exchanges reserved for discovery to complete */
#define LPFC_DISC_IOCB_BUFF_COUNT 20
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c~scsi-lpfc-convert-timeouts-to-secs_to_jiffies
+++ a/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -4973,7 +4973,7 @@ lpfc_set_disctmo(struct lpfc_vport *vpor
tmo, vport->port_state, vport->fc_flag);
}
- mod_timer(&vport->fc_disctmo, jiffies + msecs_to_jiffies(1000 * tmo));
+ mod_timer(&vport->fc_disctmo, jiffies + secs_to_jiffies(tmo));
set_bit(FC_DISC_TMO, &vport->fc_flag);
/* Start Discovery Timer state <hba_state> */
--- a/drivers/scsi/lpfc/lpfc_init.c~scsi-lpfc-convert-timeouts-to-secs_to_jiffies
+++ a/drivers/scsi/lpfc/lpfc_init.c
@@ -595,7 +595,7 @@ lpfc_config_port_post(struct lpfc_hba *p
/* Set up ring-0 (ELS) timer */
timeout = phba->fc_ratov * 2;
mod_timer(&vport->els_tmofunc,
- jiffies + msecs_to_jiffies(1000 * timeout));
+ jiffies + secs_to_jiffies(timeout));
/* Set up heart beat (HB) timer */
mod_timer(&phba->hb_tmofunc,
jiffies + secs_to_jiffies(LPFC_HB_MBOX_INTERVAL));
@@ -604,7 +604,7 @@ lpfc_config_port_post(struct lpfc_hba *p
phba->last_completion_time = jiffies;
/* Set up error attention (ERATT) polling timer */
mod_timer(&phba->eratt_poll,
- jiffies + msecs_to_jiffies(1000 * phba->eratt_poll_interval));
+ jiffies + secs_to_jiffies(phba->eratt_poll_interval));
if (test_bit(LINK_DISABLED, &phba->hba_flag)) {
lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
@@ -3361,8 +3361,8 @@ lpfc_block_mgmt_io(struct lpfc_hba *phba
/* Determine how long we might wait for the active mailbox
* command to be gracefully completed by firmware.
*/
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
- phba->sli.mbox_active) * 1000) + jiffies;
+ timeout = secs_to_jiffies(lpfc_mbox_tmo_val(phba,
+ phba->sli.mbox_active)) + jiffies;
}
spin_unlock_irqrestore(&phba->hbalock, iflag);
@@ -6909,7 +6909,7 @@ lpfc_sli4_async_fip_evt(struct lpfc_hba
* re-instantiate the Vlink using FDISC.
*/
mod_timer(&ndlp->nlp_delayfunc,
- jiffies + msecs_to_jiffies(1000));
+ jiffies + secs_to_jiffies(1));
set_bit(NLP_DELAY_TMO, &ndlp->nlp_flag);
ndlp->nlp_last_elscmd = ELS_CMD_FDISC;
vport->port_state = LPFC_FDISC;
--- a/drivers/scsi/lpfc/lpfc_scsi.c~scsi-lpfc-convert-timeouts-to-secs_to_jiffies
+++ a/drivers/scsi/lpfc/lpfc_scsi.c
@@ -5645,9 +5645,8 @@ wait_for_cmpl:
* cmd_flag is set to LPFC_DRIVER_ABORTED before we wait
* for abort to complete.
*/
- wait_event_timeout(waitq,
- (lpfc_cmd->pCmd != cmnd),
- msecs_to_jiffies(2*vport->cfg_devloss_tmo*1000));
+ wait_event_timeout(waitq, (lpfc_cmd->pCmd != cmnd),
+ secs_to_jiffies(2*vport->cfg_devloss_tmo));
spin_lock(&lpfc_cmd->buf_lock);
@@ -5911,7 +5910,7 @@ lpfc_chk_tgt_mapped(struct lpfc_vport *v
* If target is not in a MAPPED state, delay until
* target is rediscovered or devloss timeout expires.
*/
- later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
+ later = secs_to_jiffies(2 * vport->cfg_devloss_tmo) + jiffies;
while (time_after(later, jiffies)) {
if (!pnode)
return FAILED;
@@ -5957,7 +5956,7 @@ lpfc_reset_flush_io_context(struct lpfc_
lpfc_sli_abort_taskmgmt(vport,
&phba->sli.sli3_ring[LPFC_FCP_RING],
tgt_id, lun_id, context);
- later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
+ later = secs_to_jiffies(2 * vport->cfg_devloss_tmo) + jiffies;
while (time_after(later, jiffies) && cnt) {
schedule_timeout_uninterruptible(msecs_to_jiffies(20));
cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context);
@@ -6137,8 +6136,7 @@ lpfc_target_reset_handler(struct scsi_cm
wait_event_timeout(waitq,
!test_bit(NLP_WAIT_FOR_LOGO,
&pnode->save_flags),
- msecs_to_jiffies(dev_loss_tmo *
- 1000));
+ secs_to_jiffies(dev_loss_tmo));
if (test_and_clear_bit(NLP_WAIT_FOR_LOGO,
&pnode->save_flags))
--- a/drivers/scsi/lpfc/lpfc_sli.c~scsi-lpfc-convert-timeouts-to-secs_to_jiffies
+++ a/drivers/scsi/lpfc/lpfc_sli.c
@@ -1025,7 +1025,7 @@ lpfc_handle_rrq_active(struct lpfc_hba *
LIST_HEAD(send_rrq);
clear_bit(HBA_RRQ_ACTIVE, &phba->hba_flag);
- next_time = jiffies + msecs_to_jiffies(1000 * (phba->fc_ratov + 1));
+ next_time = jiffies + secs_to_jiffies(phba->fc_ratov + 1);
spin_lock_irqsave(&phba->rrq_list_lock, iflags);
list_for_each_entry_safe(rrq, nextrrq,
&phba->active_rrq_list, list) {
@@ -1208,8 +1208,7 @@ lpfc_set_rrq_active(struct lpfc_hba *phb
else
rrq->send_rrq = 0;
rrq->xritag = xritag;
- rrq->rrq_stop_time = jiffies +
- msecs_to_jiffies(1000 * (phba->fc_ratov + 1));
+ rrq->rrq_stop_time = jiffies + secs_to_jiffies(phba->fc_ratov + 1);
rrq->nlp_DID = ndlp->nlp_DID;
rrq->vport = ndlp->vport;
rrq->rxid = rxid;
@@ -1736,8 +1735,7 @@ lpfc_sli_ringtxcmpl_put(struct lpfc_hba
BUG_ON(!piocb->vport);
if (!test_bit(FC_UNLOADING, &piocb->vport->load_flag))
mod_timer(&piocb->vport->els_tmofunc,
- jiffies +
- msecs_to_jiffies(1000 * (phba->fc_ratov << 1)));
+ jiffies + secs_to_jiffies(phba->fc_ratov << 1));
}
return 0;
@@ -3956,8 +3954,7 @@ void lpfc_poll_eratt(struct timer_list *
else
/* Restart the timer for next eratt poll */
mod_timer(&phba->eratt_poll,
- jiffies +
- msecs_to_jiffies(1000 * phba->eratt_poll_interval));
+ jiffies + secs_to_jiffies(phba->eratt_poll_interval);
return;
}
@@ -9008,7 +9005,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phb
/* Start the ELS watchdog timer */
mod_timer(&vport->els_tmofunc,
- jiffies + msecs_to_jiffies(1000 * (phba->fc_ratov * 2)));
+ jiffies + secs_to_jiffies(phba->fc_ratov * 2));
/* Start heart beat timer */
mod_timer(&phba->hb_tmofunc,
@@ -9027,7 +9024,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phb
/* Start error attention (ERATT) polling timer */
mod_timer(&phba->eratt_poll,
- jiffies + msecs_to_jiffies(1000 * phba->eratt_poll_interval));
+ jiffies + secs_to_jiffies(phba->eratt_poll_interval));
/*
* The port is ready, set the host's link state to LINK_DOWN
@@ -9504,8 +9501,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *
goto out_not_finished;
}
/* timeout active mbox command */
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, pmbox) *
- 1000);
+ timeout = secs_to_jiffies(lpfc_mbox_tmo_val(phba, pmbox));
mod_timer(&psli->mbox_tmo, jiffies + timeout);
}
@@ -9629,8 +9625,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *
drvr_flag);
goto out_not_finished;
}
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, pmbox) *
- 1000) + jiffies;
+ timeout = secs_to_jiffies(lpfc_mbox_tmo_val(phba, pmbox)) + jiffies;
i = 0;
/* Wait for command to complete */
while (((word0 & OWN_CHIP) == OWN_CHIP) ||
@@ -9756,9 +9751,8 @@ lpfc_sli4_async_mbox_block(struct lpfc_h
* command to be gracefully completed by firmware.
*/
if (phba->sli.mbox_active)
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
- phba->sli.mbox_active) *
- 1000) + jiffies;
+ timeout = secs_to_jiffies(lpfc_mbox_tmo_val(phba,
+ phba->sli.mbox_active)) + jiffies;
spin_unlock_irq(&phba->hbalock);
/* Make sure the mailbox is really active */
@@ -9881,8 +9875,7 @@ lpfc_sli4_wait_bmbx_ready(struct lpfc_hb
}
}
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mboxq)
- * 1000) + jiffies;
+ timeout = secs_to_jiffies(lpfc_mbox_tmo_val(phba, mboxq)) + jiffies;
do {
bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
@@ -10230,7 +10223,7 @@ lpfc_sli4_post_async_mbox(struct lpfc_hb
/* Start timer for the mbox_tmo and log some mailbox post messages */
mod_timer(&psli->mbox_tmo, (jiffies +
- msecs_to_jiffies(1000 * lpfc_mbox_tmo_val(phba, mboxq))));
+ secs_to_jiffies(lpfc_mbox_tmo_val(phba, mboxq))));
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
"(%d):0355 Mailbox cmd x%x (x%x/x%x) issue Data: "
@@ -13159,7 +13152,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba
retval = lpfc_sli_issue_iocb(phba, ring_number, piocb,
SLI_IOCB_RET_IOCB);
if (retval == IOCB_SUCCESS) {
- timeout_req = msecs_to_jiffies(timeout * 1000);
+ timeout_req = secs_to_jiffies(timeout);
timeleft = wait_event_timeout(done_q,
lpfc_chk_iocb_flg(phba, piocb, LPFC_IO_WAKE),
timeout_req);
@@ -13275,8 +13268,7 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba
/* now issue the command */
retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
if (retval == MBX_BUSY || retval == MBX_SUCCESS) {
- wait_for_completion_timeout(&mbox_done,
- msecs_to_jiffies(timeout * 1000));
+ wait_for_completion_timeout(&mbox_done, secs_to_jiffies(timeout));
spin_lock_irqsave(&phba->hbalock, flag);
pmboxq->ctx_u.mbox_wait = NULL;
@@ -13336,9 +13328,8 @@ lpfc_sli_mbox_sys_shutdown(struct lpfc_h
* command to be gracefully completed by firmware.
*/
if (phba->sli.mbox_active)
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
- phba->sli.mbox_active) *
- 1000) + jiffies;
+ timeout = secs_to_jiffies(lpfc_mbox_tmo_val(phba,
+ phba->sli.mbox_active)) + jiffies;
spin_unlock_irq(&phba->hbalock);
/* Enable softirqs again, done with phba->hbalock */
--- a/drivers/scsi/lpfc/lpfc_vport.c~scsi-lpfc-convert-timeouts-to-secs_to_jiffies
+++ a/drivers/scsi/lpfc/lpfc_vport.c
@@ -246,7 +246,7 @@ static void lpfc_discovery_wait(struct l
* fabric RA_TOV value and dev_loss tmo. The driver's
* devloss_tmo is 10 giving this loop a 3x multiplier minimally.
*/
- wait_time_max = msecs_to_jiffies(((phba->fc_ratov * 3) + 3) * 1000);
+ wait_time_max = secs_to_jiffies((phba->fc_ratov * 3) + 3);
wait_time_max += jiffies;
start_time = jiffies;
while (time_before(jiffies, wait_time_max)) {
_
Patches currently in -mm which might be from eahariha@linux.microsoft.com are
coccinelle-misc-secs_to_jiffies-patch-expressions-too.patch
scsi-lpfc-convert-timeouts-to-secs_to_jiffies.patch
accel-habanalabs-convert-timeouts-to-secs_to_jiffies.patch
alsa-ac97-convert-timeouts-to-secs_to_jiffies.patch
btrfs-convert-timeouts-to-secs_to_jiffies.patch
libceph-convert-timeouts-to-secs_to_jiffies.patch
ata-libata-zpodd-convert-timeouts-to-secs_to_jiffies.patch
xfs-convert-timeouts-to-secs_to_jiffies.patch
power-supply-da9030-convert-timeouts-to-secs_to_jiffies.patch
nvme-convert-timeouts-to-secs_to_jiffies.patch
spi-spi-fsl-lpspi-convert-timeouts-to-secs_to_jiffies.patch
spi-spi-imx-convert-timeouts-to-secs_to_jiffies.patch
platform-x86-amd-pmf-convert-timeouts-to-secs_to_jiffies.patch
platform-x86-thinkpad_acpi-convert-timeouts-to-secs_to_jiffies.patch
rdma-bnxt_re-convert-timeouts-to-secs_to_jiffies.patch
reply other threads:[~2025-02-25 22:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250225224002.72001C4CEDD@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=Shyam-sundar.S-k@amd.com \
--cc=axboe@kernel.dk \
--cc=broonie@kernel.org \
--cc=cassel@kernel.org \
--cc=cem@kernel.org \
--cc=clm@fb.com \
--cc=cmaiolino@redhat.com \
--cc=dick.kennedy@broadcom.com \
--cc=djwong@kernel.org \
--cc=dlemoal@kernel.org \
--cc=dongsheng.yang@easystack.cn \
--cc=dsterba@suse.com \
--cc=eahariha@linux.microsoft.com \
--cc=festevam@gmail.com \
--cc=frank.li@nxp.com \
--cc=hch@lst.de \
--cc=hdegoede@redhat.com \
--cc=hmh@hmh.eng.br \
--cc=idryomov@gmail.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=james.bottomley@HansenPartnership.com \
--cc=james.smart@broadcom.com \
--cc=jgg@ziepe.ca \
--cc=josef@toxicpanda.com \
--cc=julia.lawall@inria.fr \
--cc=kalesh-anakkur.purayil@broadcom.com \
--cc=kbusch@kernel.org \
--cc=leon@kernel.org \
--cc=martin.petersen@oracle.com \
--cc=mkl@pengutronix.de \
--cc=mm-commits@vger.kernel.org \
--cc=nicolas.palix@imag.fr \
--cc=ogabbay@kernel.org \
--cc=perex@perex.cz \
--cc=s.hauer@pengutronix.de \
--cc=sagi@grimberg.me \
--cc=selvin.xavier@broadcom.com \
--cc=shawnguo@kernel.org \
--cc=sre@kernel.org \
--cc=tiwai@suse.com \
--cc=tiwai@suse.de \
--cc=xiubli@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.