From: Mario Limonciello <superm1@kernel.org>
To: "Gautham R . Shenoy" <gautham.shenoy@amd.com>,
Perry Yuan <perry.yuan@amd.com>
Cc: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>,
linux-kernel@vger.kernel.org (open list:X86 ARCHITECTURE (32-BIT
AND 64-BIT)),
linux-pm@vger.kernel.org (open list:CPU FREQUENCY SCALING
FRAMEWORK), Mario Limonciello <mario.limonciello@amd.com>,
Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Subject: [PATCH v5 12/19] cpufreq/amd-pstate: Replace all AMD_CPPC_* macros with masks
Date: Wed, 26 Feb 2025 01:49:27 -0600 [thread overview]
Message-ID: <20250226074934.1667721-13-superm1@kernel.org> (raw)
In-Reply-To: <20250226074934.1667721-1-superm1@kernel.org>
From: Mario Limonciello <mario.limonciello@amd.com>
Bitfield masks are easier to follow and less error prone.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
v3:
* Add tag
* Add missing includes
v2:
* Add a comment in msr-index.h
* Pick up tag
---
arch/x86/include/asm/msr-index.h | 20 +++++++++++---------
arch/x86/kernel/acpi/cppc.c | 4 +++-
drivers/cpufreq/amd-pstate-ut.c | 9 +++++----
drivers/cpufreq/amd-pstate.c | 16 ++++++----------
4 files changed, 25 insertions(+), 24 deletions(-)
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index c84930610c7e6..cfcc49e5cf925 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -701,15 +701,17 @@
#define MSR_AMD_CPPC_REQ 0xc00102b3
#define MSR_AMD_CPPC_STATUS 0xc00102b4
-#define AMD_CPPC_LOWEST_PERF(x) (((x) >> 0) & 0xff)
-#define AMD_CPPC_LOWNONLIN_PERF(x) (((x) >> 8) & 0xff)
-#define AMD_CPPC_NOMINAL_PERF(x) (((x) >> 16) & 0xff)
-#define AMD_CPPC_HIGHEST_PERF(x) (((x) >> 24) & 0xff)
-
-#define AMD_CPPC_MAX_PERF(x) (((x) & 0xff) << 0)
-#define AMD_CPPC_MIN_PERF(x) (((x) & 0xff) << 8)
-#define AMD_CPPC_DES_PERF(x) (((x) & 0xff) << 16)
-#define AMD_CPPC_ENERGY_PERF_PREF(x) (((x) & 0xff) << 24)
+/* Masks for use with MSR_AMD_CPPC_CAP1 */
+#define AMD_CPPC_LOWEST_PERF_MASK GENMASK(7, 0)
+#define AMD_CPPC_LOWNONLIN_PERF_MASK GENMASK(15, 8)
+#define AMD_CPPC_NOMINAL_PERF_MASK GENMASK(23, 16)
+#define AMD_CPPC_HIGHEST_PERF_MASK GENMASK(31, 24)
+
+/* Masks for use with MSR_AMD_CPPC_REQ */
+#define AMD_CPPC_MAX_PERF_MASK GENMASK(7, 0)
+#define AMD_CPPC_MIN_PERF_MASK GENMASK(15, 8)
+#define AMD_CPPC_DES_PERF_MASK GENMASK(23, 16)
+#define AMD_CPPC_EPP_PERF_MASK GENMASK(31, 24)
/* AMD Performance Counter Global Status and Control MSRs */
#define MSR_AMD64_PERF_CNTR_GLOBAL_STATUS 0xc0000300
diff --git a/arch/x86/kernel/acpi/cppc.c b/arch/x86/kernel/acpi/cppc.c
index d745dd586303c..77bfb846490c0 100644
--- a/arch/x86/kernel/acpi/cppc.c
+++ b/arch/x86/kernel/acpi/cppc.c
@@ -4,6 +4,8 @@
* Copyright (c) 2016, Intel Corporation.
*/
+#include <linux/bitfield.h>
+
#include <acpi/cppc_acpi.h>
#include <asm/msr.h>
#include <asm/processor.h>
@@ -149,7 +151,7 @@ int amd_get_highest_perf(unsigned int cpu, u32 *highest_perf)
if (ret)
goto out;
- val = AMD_CPPC_HIGHEST_PERF(val);
+ val = FIELD_GET(AMD_CPPC_HIGHEST_PERF_MASK, val);
} else {
ret = cppc_get_highest_perf(cpu, &val);
if (ret)
diff --git a/drivers/cpufreq/amd-pstate-ut.c b/drivers/cpufreq/amd-pstate-ut.c
index edc1475989e3d..e671bc7d15508 100644
--- a/drivers/cpufreq/amd-pstate-ut.c
+++ b/drivers/cpufreq/amd-pstate-ut.c
@@ -22,6 +22,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/bitfield.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -142,10 +143,10 @@ static int amd_pstate_ut_check_perf(u32 index)
return ret;
}
- highest_perf = AMD_CPPC_HIGHEST_PERF(cap1);
- nominal_perf = AMD_CPPC_NOMINAL_PERF(cap1);
- lowest_nonlinear_perf = AMD_CPPC_LOWNONLIN_PERF(cap1);
- lowest_perf = AMD_CPPC_LOWEST_PERF(cap1);
+ highest_perf = FIELD_GET(AMD_CPPC_HIGHEST_PERF_MASK, cap1);
+ nominal_perf = FIELD_GET(AMD_CPPC_NOMINAL_PERF_MASK, cap1);
+ lowest_nonlinear_perf = FIELD_GET(AMD_CPPC_LOWNONLIN_PERF_MASK, cap1);
+ lowest_perf = FIELD_GET(AMD_CPPC_LOWEST_PERF_MASK, cap1);
}
cur_perf = READ_ONCE(cpudata->perf);
diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
index 2cec8d7d92f51..c2260bbee4eb7 100644
--- a/drivers/cpufreq/amd-pstate.c
+++ b/drivers/cpufreq/amd-pstate.c
@@ -89,11 +89,6 @@ static bool cppc_enabled;
static bool amd_pstate_prefcore = true;
static struct quirk_entry *quirks;
-#define AMD_CPPC_MAX_PERF_MASK GENMASK(7, 0)
-#define AMD_CPPC_MIN_PERF_MASK GENMASK(15, 8)
-#define AMD_CPPC_DES_PERF_MASK GENMASK(23, 16)
-#define AMD_CPPC_EPP_PERF_MASK GENMASK(31, 24)
-
/*
* AMD Energy Preference Performance (EPP)
* The EPP is used in the CCLK DPM controller to drive
@@ -439,12 +434,13 @@ static int msr_init_perf(struct amd_cpudata *cpudata)
perf.highest_perf = numerator;
perf.max_limit_perf = numerator;
- perf.min_limit_perf = AMD_CPPC_LOWEST_PERF(cap1);
- perf.nominal_perf = AMD_CPPC_NOMINAL_PERF(cap1);
- perf.lowest_nonlinear_perf = AMD_CPPC_LOWNONLIN_PERF(cap1);
- perf.lowest_perf = AMD_CPPC_LOWEST_PERF(cap1);
+ perf.min_limit_perf = FIELD_GET(AMD_CPPC_LOWEST_PERF_MASK, cap1);
+ perf.nominal_perf = FIELD_GET(AMD_CPPC_NOMINAL_PERF_MASK, cap1);
+ perf.lowest_nonlinear_perf = FIELD_GET(AMD_CPPC_LOWNONLIN_PERF_MASK, cap1);
+ perf.lowest_perf = FIELD_GET(AMD_CPPC_LOWEST_PERF_MASK, cap1);
WRITE_ONCE(cpudata->perf, perf);
- WRITE_ONCE(cpudata->prefcore_ranking, AMD_CPPC_HIGHEST_PERF(cap1));
+ WRITE_ONCE(cpudata->prefcore_ranking, FIELD_GET(AMD_CPPC_HIGHEST_PERF_MASK, cap1));
+
return 0;
}
--
2.43.0
next prev parent reply other threads:[~2025-02-26 7:49 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-26 7:49 [PATCH v5 00/19] amd-pstate cleanups Mario Limonciello
2025-02-26 7:49 ` [PATCH v5 01/19] cpufreq/amd-pstate: Invalidate cppc_req_cached during suspend Mario Limonciello
2025-02-26 7:49 ` [PATCH v5 02/19] cpufreq/amd-pstate: Show a warning when a CPU fails to setup Mario Limonciello
2025-03-18 7:58 ` Paul Menzel
2025-02-26 7:49 ` [PATCH v5 03/19] cpufreq/amd-pstate: Drop min and max cached frequencies Mario Limonciello
2025-02-26 7:49 ` [PATCH v5 04/19] cpufreq/amd-pstate: Move perf values into a union Mario Limonciello
2025-02-27 12:59 ` kernel test robot
2025-02-27 20:09 ` Mario Limonciello
2025-03-01 7:02 ` Dhananjay Ugwekar
2025-02-26 7:49 ` [PATCH v5 05/19] cpufreq/amd-pstate: Overhaul locking Mario Limonciello
2025-02-26 7:49 ` [PATCH v5 06/19] cpufreq/amd-pstate: Drop `cppc_cap1_cached` Mario Limonciello
2025-02-26 7:49 ` [PATCH v5 07/19] cpufreq/amd-pstate-ut: Use _free macro to free put policy Mario Limonciello
2025-02-26 7:49 ` [PATCH v5 08/19] cpufreq/amd-pstate-ut: Allow lowest nonlinear and lowest to be the same Mario Limonciello
2025-02-26 7:49 ` [PATCH v5 09/19] cpufreq/amd-pstate-ut: Drop SUCCESS and FAIL enums Mario Limonciello
2025-02-26 7:49 ` [PATCH v5 10/19] cpufreq/amd-pstate-ut: Run on all of the correct CPUs Mario Limonciello
2025-02-26 7:49 ` [PATCH v5 11/19] cpufreq/amd-pstate-ut: Adjust variable scope Mario Limonciello
2025-02-26 7:49 ` Mario Limonciello [this message]
2025-02-26 7:49 ` [PATCH v5 13/19] cpufreq/amd-pstate: Cache CPPC request in shared mem case too Mario Limonciello
2025-02-26 7:49 ` [PATCH v5 14/19] cpufreq/amd-pstate: Move all EPP tracing into *_update_perf and *_set_epp functions Mario Limonciello
2025-02-26 7:49 ` [PATCH v5 15/19] cpufreq/amd-pstate: Update cppc_req_cached for shared mem EPP writes Mario Limonciello
2025-02-26 7:49 ` [PATCH v5 16/19] cpufreq/amd-pstate: Drop debug statements for policy setting Mario Limonciello
2025-02-26 7:49 ` [PATCH v5 17/19] cpufreq/amd-pstate: Rework CPPC enabling Mario Limonciello
2025-03-01 7:03 ` Dhananjay Ugwekar
2025-03-04 5:08 ` Gautham R. Shenoy
2025-02-26 7:49 ` [PATCH v5 18/19] cpufreq/amd-pstate: Stop caching EPP Mario Limonciello
2025-02-26 7:49 ` [PATCH v5 19/19] cpufreq/amd-pstate: Drop actions in amd_pstate_epp_cpu_offline() Mario Limonciello
2025-03-04 5:11 ` Gautham R. Shenoy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250226074934.1667721-13-superm1@kernel.org \
--to=superm1@kernel.org \
--cc=Dhananjay.Ugwekar@amd.com \
--cc=gautham.shenoy@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=perry.yuan@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.