[PATCH net-next 2/5] net/mlx5: Remove newline at the end of a netlink error message

[Gal Pressman <gal@nvidia.com>]

Netlink error messages should not have a newline at the end of the
string.

Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/dpll.c            | 2 +-
 drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c | 2 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c      | 2 +-
 drivers/net/ethernet/mellanox/mlx5/core/esw/bridge.c      | 6 +++---
 4 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/dpll.c b/drivers/net/ethernet/mellanox/mlx5/core/dpll.c
index 31142f6cc372..1e5522a19483 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/dpll.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/dpll.c
@@ -242,7 +242,7 @@ static int mlx5_dpll_clock_quality_level_get(const struct dpll_device *dpll,
 		return 0;
 	}
 errout:
-	NL_SET_ERR_MSG_MOD(extack, "Invalid clock quality level obtained from firmware\n");
+	NL_SET_ERR_MSG_MOD(extack, "Invalid clock quality level obtained from firmware");
 	return -EINVAL;
 }
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c
index e4e487c8431b..5c762a71818d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c
@@ -140,7 +140,7 @@ static int mlx5e_tc_tun_parse_vxlan_gbp_option(struct mlx5e_priv *priv,
 	gbp_mask = (u32 *)&enc_opts.mask->data[0];
 
 	if (*gbp_mask & ~VXLAN_GBP_MASK) {
-		NL_SET_ERR_MSG_FMT_MOD(extack, "Wrong VxLAN GBP mask(0x%08X)\n", *gbp_mask);
+		NL_SET_ERR_MSG_FMT_MOD(extack, "Wrong VxLAN GBP mask(0x%08X)", *gbp_mask);
 		return -EINVAL;
 	}
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index f9113cb13a0c..a4b2e57b3f80 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -2040,7 +2040,7 @@ static int mlx5e_get_module_eeprom_by_page(struct net_device *netdev,
 		if (size_read < 0) {
 			NL_SET_ERR_MSG_FMT_MOD(
 				extack,
-				"Query module eeprom by page failed, read %u bytes, err %d\n",
+				"Query module eeprom by page failed, read %u bytes, err %d",
 				i, size_read);
 			return i;
 		}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/esw/bridge.c b/drivers/net/ethernet/mellanox/mlx5/core/esw/bridge.c
index 5f647358a05c..76e35c827da0 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/esw/bridge.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/bridge.c
@@ -1863,7 +1863,7 @@ int mlx5_esw_bridge_port_mdb_add(struct net_device *dev, u16 vport_num, u16 esw_
 			 "Failed to lookup bridge port to add MDB (MAC=%pM,vport=%u)\n",
 			 addr, vport_num);
 		NL_SET_ERR_MSG_FMT_MOD(extack,
-				       "Failed to lookup bridge port to add MDB (MAC=%pM,vport=%u)\n",
+				       "Failed to lookup bridge port to add MDB (MAC=%pM,vport=%u)",
 				       addr, vport_num);
 		return -EINVAL;
 	}
@@ -1876,7 +1876,7 @@ int mlx5_esw_bridge_port_mdb_add(struct net_device *dev, u16 vport_num, u16 esw_
 				 "Failed to lookup bridge port vlan metadata to create MDB (MAC=%pM,vid=%u,vport=%u)\n",
 				 addr, vid, vport_num);
 			NL_SET_ERR_MSG_FMT_MOD(extack,
-					       "Failed to lookup vlan metadata for MDB (MAC=%pM,vid=%u,vport=%u)\n",
+					       "Failed to lookup vlan metadata for MDB (MAC=%pM,vid=%u,vport=%u)",
 					       addr, vid, vport_num);
 			return -EINVAL;
 		}
@@ -1884,7 +1884,7 @@ int mlx5_esw_bridge_port_mdb_add(struct net_device *dev, u16 vport_num, u16 esw_
 
 	err = mlx5_esw_bridge_port_mdb_attach(dev, port, addr, vid);
 	if (err) {
-		NL_SET_ERR_MSG_FMT_MOD(extack, "Failed to add MDB (MAC=%pM,vid=%u,vport=%u)\n",
+		NL_SET_ERR_MSG_FMT_MOD(extack, "Failed to add MDB (MAC=%pM,vid=%u,vport=%u)",
 				       addr, vid, vport_num);
 		return err;
 	}
-- 
2.40.1