All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fabio Estevam <festevam@gmail.com>
To: buildroot@buildroot.org
Cc: Fabio Estevam <festevam@gmail.com>
Subject: [Buildroot] [PATCH 2/2] configs/imx93-evk_defconfig: new defconfig
Date: Wed, 26 Feb 2025 17:51:44 -0300	[thread overview]
Message-ID: <20250226205144.1843356-2-festevam@gmail.com> (raw)
In-Reply-To: <20250226205144.1843356-1-festevam@gmail.com>

Add a new defconfig for the imx93-evk board that uses upstream
components, such as:
    
- Linux Kernel: Upstream version 6.12.16
- U-boot: Upstream version 2025.01
- ATF: Upstream version 2.12

Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
 board/freescale/imx93-evk/extlinux.conf.in    |  4 ++
 board/freescale/imx93-evk/genimage.cfg.in     | 17 +++++++
 .../arm-trusted-firmware.hash                 |  2 +
 .../patches/linux-headers/linux-headers.hash  |  1 +
 .../imx93-evk/patches/linux/linux.hash        |  2 +
 .../imx93-evk/patches/uboot/uboot.hash        |  2 +
 board/freescale/imx93-evk/post-build.sh       |  7 +++
 board/freescale/imx93-evk/readme.txt          | 31 ++++++++++++
 configs/imx93-evk_defconfig                   | 50 +++++++++++++++++++
 9 files changed, 116 insertions(+)
 create mode 100644 board/freescale/imx93-evk/extlinux.conf.in
 create mode 100644 board/freescale/imx93-evk/genimage.cfg.in
 create mode 100644 board/freescale/imx93-evk/patches/arm-trusted-firmware/arm-trusted-firmware.hash
 create mode 120000 board/freescale/imx93-evk/patches/linux-headers/linux-headers.hash
 create mode 100644 board/freescale/imx93-evk/patches/linux/linux.hash
 create mode 100644 board/freescale/imx93-evk/patches/uboot/uboot.hash
 create mode 100755 board/freescale/imx93-evk/post-build.sh
 create mode 100644 board/freescale/imx93-evk/readme.txt
 create mode 100644 configs/imx93-evk_defconfig

diff --git a/board/freescale/imx93-evk/extlinux.conf.in b/board/freescale/imx93-evk/extlinux.conf.in
new file mode 100644
index 000000000000..143e28a823c3
--- /dev/null
+++ b/board/freescale/imx93-evk/extlinux.conf.in
@@ -0,0 +1,4 @@
+label buildroot
+  kernel /boot/Image
+  devicetree /boot/freescale/imx93-11x11-evk.dtb
+  append root=PARTUUID=%PARTUUID% rootwait rw
diff --git a/board/freescale/imx93-evk/genimage.cfg.in b/board/freescale/imx93-evk/genimage.cfg.in
new file mode 100644
index 000000000000..10c52548cdfa
--- /dev/null
+++ b/board/freescale/imx93-evk/genimage.cfg.in
@@ -0,0 +1,17 @@
+image sdcard.img {
+	hdimage {
+		partition-table-type = "gpt"
+	}
+
+	partition imx-boot {
+		in-partition-table = "no"
+		image = "flash.bin"
+		offset = 32K
+	}
+
+	partition rootfs {
+		offset = 8M
+		image = "rootfs.ext4"
+		partition-uuid = %PARTUUID%
+	}
+}
diff --git a/board/freescale/imx93-evk/patches/arm-trusted-firmware/arm-trusted-firmware.hash b/board/freescale/imx93-evk/patches/arm-trusted-firmware/arm-trusted-firmware.hash
new file mode 100644
index 000000000000..b5898cba3f96
--- /dev/null
+++ b/board/freescale/imx93-evk/patches/arm-trusted-firmware/arm-trusted-firmware.hash
@@ -0,0 +1,2 @@
+# Locally calculated
+sha256  06b35a3596b8417bf66f7bfdd7acd181bcb53fc36dc13216227b5cae154e0219  arm-trusted-firmware-v2.12-git4.tar.gz
diff --git a/board/freescale/imx93-evk/patches/linux-headers/linux-headers.hash b/board/freescale/imx93-evk/patches/linux-headers/linux-headers.hash
new file mode 120000
index 000000000000..5808d92afe89
--- /dev/null
+++ b/board/freescale/imx93-evk/patches/linux-headers/linux-headers.hash
@@ -0,0 +1 @@
+../linux/linux.hash
\ No newline at end of file
diff --git a/board/freescale/imx93-evk/patches/linux/linux.hash b/board/freescale/imx93-evk/patches/linux/linux.hash
new file mode 100644
index 000000000000..5e0df51126d5
--- /dev/null
+++ b/board/freescale/imx93-evk/patches/linux/linux.hash
@@ -0,0 +1,2 @@
+# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
+sha256  5f81362a694f51520bff9faecb73f1cc9bc7bece6fdd10d5c27e348df39d7dc4  linux-6.12.16.tar.xz
diff --git a/board/freescale/imx93-evk/patches/uboot/uboot.hash b/board/freescale/imx93-evk/patches/uboot/uboot.hash
new file mode 100644
index 000000000000..50674352d71d
--- /dev/null
+++ b/board/freescale/imx93-evk/patches/uboot/uboot.hash
@@ -0,0 +1,2 @@
+# Locally calculated
+sha256  cdef7d507c93f1bbd9f015ea9bc21fa074268481405501945abc6f854d5b686f  u-boot-2025.01.tar.bz2
diff --git a/board/freescale/imx93-evk/post-build.sh b/board/freescale/imx93-evk/post-build.sh
new file mode 100755
index 000000000000..604f387768d8
--- /dev/null
+++ b/board/freescale/imx93-evk/post-build.sh
@@ -0,0 +1,7 @@
+#!/bin/sh
+BOARD_DIR="$(dirname "$0")"
+PARTUUID="$("$HOST_DIR"/bin/uuidgen)"
+
+install -d "$TARGET_DIR/boot/extlinux/"
+sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/extlinux.conf.in" > "$TARGET_DIR/boot/extlinux/extlinux.conf"
+sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg.in" > "$BINARIES_DIR/genimage.cfg"
diff --git a/board/freescale/imx93-evk/readme.txt b/board/freescale/imx93-evk/readme.txt
new file mode 100644
index 000000000000..9d3302a0ca10
--- /dev/null
+++ b/board/freescale/imx93-evk/readme.txt
@@ -0,0 +1,31 @@
+NXP i.MX93 EVK
+==============
+
+This is a Buildroot target for building an image for the imx93-evk
+board using upstream components: TF-A, U-Boot and kernel.
+
+How to build it
+===============
+
+Configure Buildroot and build it:
+
+  $ make imx93-evk_defconfig
+  $ make
+
+Flashing the SD card image
+==========================
+
+Copy the sdcard.img file into the SD card:
+
+  $ sudo dd if=output/images/sdcard.img of=<your-sd-device>; sync
+
+
+Booting the board
+=================
+
+To boot your newly created system:
+
+- Insert the SD card in the MicroSD slot of the board.
+- Connect a serial to USB cable to the DBG port.
+- Open a terminal on the ttyUSB2 port. For example: sudo picocom -b 115200 /dev/ttyUSB2
+- Power on the board.
diff --git a/configs/imx93-evk_defconfig b/configs/imx93-evk_defconfig
new file mode 100644
index 000000000000..f3af2b51830e
--- /dev/null
+++ b/configs/imx93-evk_defconfig
@@ -0,0 +1,50 @@
+BR2_aarch64=y
+BR2_cortex_a55=y
+BR2_ARM_FPU_VFPV4D16=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y
+BR2_GLOBAL_PATCH_DIR="board/freescale/imx93-evk/patches"
+BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyLP0"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/freescale/imx93-evk/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c $(BINARIES_DIR)/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.16"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx93-11x11-evk"
+BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_PACKAGE_FREESCALE_IMX=y
+BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX93=y
+BR2_PACKAGE_FIRMWARE_ELE_IMX=y
+BR2_PACKAGE_FIRMWARE_IMX=y
+BR2_PACKAGE_FIRMWARE_IMX_LPDDR4=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="256M"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.12"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx93"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.01"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx93_11x11_evk"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
+BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin"
+BR2_TARGET_UBOOT_SPL=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y
-- 
2.34.1

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

  reply	other threads:[~2025-02-26 20:51 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-26 20:51 [Buildroot] [PATCH 1/2] package/freescale-imx: Allow firmware installation on i.MX93 Fabio Estevam
2025-02-26 20:51 ` Fabio Estevam [this message]
2025-02-26 21:34 ` Julien Olivain
2025-02-27 10:35 ` Sébastien Szymanski
2025-02-27 14:04   ` Fabio Estevam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250226205144.1843356-2-festevam@gmail.com \
    --to=festevam@gmail.com \
    --cc=buildroot@buildroot.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.