Re: [v4 2/3] dt-bindings: fpga: Add Efinix SPI programming bindings

[Conor Dooley <conor@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 3361 bytes --]

On Fri, Feb 28, 2025 at 10:47:31AM +0100, iansdannapel@gmail.com wrote:
> From: Ian Dannapel <iansdannapel@gmail.com>
> 
> Add device tree bindings documentation for configuring Efinix FPGA
> using serial SPI passive programming mode.
> 
> Signed-off-by: Ian Dannapel <iansdannapel@gmail.com>
> ---
>  .../devicetree/bindings/fpga/efinix,spi.yaml  | 81 +++++++++++++++++++
>  1 file changed, 81 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/fpga/efinix,spi.yaml
> 
> diff --git a/Documentation/devicetree/bindings/fpga/efinix,spi.yaml b/Documentation/devicetree/bindings/fpga/efinix,spi.yaml
> new file mode 100644
> index 000000000000..145c96f38e45
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/efinix,spi.yaml

Filename matching a compatible please.

> @@ -0,0 +1,81 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/fpga/efinix,spi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Efinix SPI FPGA Manager
> +
> +maintainers:
> +  - Ian Dannapel <iansdannapel@gmail.com>
> +
> +description: |
> +  Efinix FPGAs (Trion, Topaz, and Titanium families) support loading bitstreams
> +  through "SPI Passive Mode".
> +  Note 1: Only bus width 1x is supported.
> +  Note 2: Additional pins hogs for bus width configuration must be set
> +  elsewhere, if necessary.
> +  Note 3: Topaz and Titanium support is based on documentation but remains
> +  untested.

Points 1 and 3 here seem to be driver limitations, and shouldn't really
be present in a document describing the hardware?

> +
> +  References:
> +  - https://www.efinixinc.com/docs/an006-configuring-trion-fpgas-v6.3.pdf
> +  - https://www.efinixinc.com/docs/an033-configuring-titanium-fpgas-v2.8.pdf
> +  - https://www.efinixinc.com/docs/an061-configuring-topaz-fpgas-v1.1.pdf
> +
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - efinix,trion-spi
> +      - efinix,titanium-spi
> +      - efinix,topaz-spi

> +      - efinix,fpga-spi

What hardware does this device represent? Other ones are obvious matches
to the families you mention, but what is this one?

Cheers,
Conor.

> +
> +  spi-cpha: true
> +
> +  spi-cpol: true
> +
> +  spi-max-frequency:
> +    maximum: 25000000
> +
> +  reg:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    description:
> +      reset and re-configuration trigger pin (low active)
> +    maxItems: 1
> +
> +  cdone-gpios:
> +    description:
> +      optional configuration done status pin (high active)
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - reset-gpios
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    spi {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
> +      fpga-mgr@0 {
> +        compatible = "efinix,trion-spi";
> +        reg = <0>;
> +        spi-max-frequency = <25000000>;
> +        spi-cpha;
> +        spi-cpol;
> +        reset-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
> +        cdone-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
> +      };
> +    };
> +...
> -- 
> 2.43.0
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]