All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: Rob Herring <robh@kernel.org>
Cc: "Wannes Bouwen (Nokia)" <wannes.bouwen@nokia.com>,
	"bhelgaas@google.com" <bhelgaas@google.com>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	Vidya Sagar <vidyas@nvidia.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Subject: Re: Subject: [PATCH 1/1] PCI: of: avoid warning for 4 GiB non-prefetchable
Date: Fri, 28 Feb 2025 17:17:17 -0600	[thread overview]
Message-ID: <20250228231717.GA79086@bhelgaas> (raw)
In-Reply-To: <CAL_JsqLzic6b_Bnwf9EOJvsb-HjXnu46czqGntwZyh6M4jZ9pA@mail.gmail.com>

On Fri, Feb 28, 2025 at 05:01:51PM -0600, Rob Herring wrote:
> On Fri, Feb 28, 2025 at 12:27 PM Bjorn Helgaas <helgaas@kernel.org> wrote:
> > On Thu, Nov 14, 2024 at 02:05:08PM +0000, Wannes Bouwen (Nokia) wrote:
> > > Subject: [PATCH 1/1] PCI: of: avoid warning for 4 GiB non-prefetchable
> > > windows.
> > >
> > > According to the PCIe spec, non-prefetchable memory supports only 32-bit
> > > BAR registers and are hence limited to 4 GiB. In the kernel there is a
> > > check that prints a warning if a non-prefetchable resource exceeds the
> > > 32-bit limit.
> > >
> > > This check however prints a warning when a 4 GiB window on the host
> > > bridge is used. This is perfectly possible according to the PCIe spec,
> > > so in my opinion the warning is a bit too strict. This changeset
> > > subtracts 1 from the resource_size to avoid printing a warning in the
> > > case of a 4 GiB non-prefetchable window.
> > >
> > > Signed-off-by: Wannes Bouwen <wannes.bouwen@nokia.com>
> > > ---
> > >  drivers/pci/of.c | 2 +-
> > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/pci/of.c b/drivers/pci/of.c
> > > index dacea3fc5128..ccbb1f1c2212 100644
> > > --- a/drivers/pci/of.c
> > > +++ b/drivers/pci/of.c
> > > @@ -622,7 +622,7 @@ static int pci_parse_request_of_pci_ranges(struct device *dev,
> > >             res_valid |= !(res->flags & IORESOURCE_PREFETCH);
> > >
> > >             if (!(res->flags & IORESOURCE_PREFETCH))
> > > -               if (upper_32_bits(resource_size(res)))
> > > +               if (upper_32_bits(resource_size(res) - 1))
> > >                     dev_warn(dev, "Memory resource size exceeds max for 32 bits\n");
> >
> > I guess this relies on the fact that BARs must be a power of two in
> > size, right?  So anything where the upper 32 bits of the size are
> > non-zero is either 0x1_0000_0000 (4GiB window that we shouldn't warn
> > about), or 0x2_0000_0000 or bigger (where we *do* want to warn about
> > it).
> >
> > But it looks like this is used for host bridge resources, which are
> > windows, not BARs, so they don't have to be a power of two size.  A
> > window of size 0x1_8000_0000 is perfectly legal and would fit the
> > criteria for this warning, but this patch would turn off the warning.
> 
> 0x1_8000_0000 - 1 = 0x1_7fff_ffff
> 
> So that would still work. Maybe you read it as the subtract being
> after upper_32_bits()?

Right, sorry.  I guess a better example would be something like this:

  [mem 0x2000_0000-0x21ff_ffff] -> [pci 0x0_ff00_0000-0x1_00ff_ffff]

where the size is only 0x0200_0000, so we wouldn't warn about it, but
half of the window is above 4G on PCI.

> > I don't really understand this warning in the first place, though.  It
> > was added by fede8526cc48 ("PCI: of: Warn if non-prefetchable memory
> > aperture size is > 32-bit").  But I think the real issue would be
> > related to the highest address, not the size.  For example, an
> > aperture of 0x0_c000_0000 - 0x1_4000_0000 is only 0x8000_0000 in size,
> > but the upper half of it it would be invalid for non-prefetchable
> > 32-bit BARs.
> 
> Are we talking CPU addresses or PCI addresses? For CPU addresses, it
> would be perfectly fine to be above 4G as long as PCI addresses are
> below 4G, right?

Yes, CPU addresses can be above 4G; all that matters for this is the
PCI address.

I think what's important is the largest PCI address in the window, not
the size.

  reply	other threads:[~2025-02-28 23:17 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-14 14:05 Subject: [PATCH 1/1] PCI: of: avoid warning for 4 GiB non-prefetchable Wannes Bouwen (Nokia)
2025-02-28 18:27 ` Bjorn Helgaas
2025-02-28 23:01   ` Rob Herring
2025-02-28 23:17     ` Bjorn Helgaas [this message]
2025-03-03 10:35       ` Wannes Bouwen (Nokia)
2025-03-03 15:53         ` Bjorn Helgaas
2025-03-04  9:15           ` Wannes Bouwen (Nokia)
2025-03-04 21:30             ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250228231717.GA79086@bhelgaas \
    --to=helgaas@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=robh@kernel.org \
    --cc=vidyas@nvidia.com \
    --cc=wannes.bouwen@nokia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.