From: "Rob Herring (Arm)" <robh@kernel.org>
To: soc@kernel.org
Subject: [PATCH] arm64: dts: nvidia: Remove unused and undocumented "regulator-ramp-delay-scale" property
Date: Wed, 5 Mar 2025 16:49:36 -0600 [thread overview]
Message-ID: <20250305224936.2995519-1-robh@kernel.org> (raw)
Remove "regulator-ramp-delay-scale" property which is both unused in the
kernel and undocumented. Most likely they are leftovers from downstream.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
index c56824d7f4d8..0ecdd7243b2e 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -266,7 +266,6 @@ vdd_soc: sd0 {
regulator-max-microvolt = <1170000>;
regulator-enable-ramp-delay = <146>;
regulator-ramp-delay = <27500>;
- regulator-ramp-delay-scale = <300>;
regulator-always-on;
regulator-boot-on;
@@ -281,7 +280,6 @@ vdd_ddr: sd1 {
regulator-max-microvolt = <1150000>;
regulator-enable-ramp-delay = <176>;
regulator-ramp-delay = <27500>;
- regulator-ramp-delay-scale = <300>;
regulator-always-on;
regulator-boot-on;
@@ -296,7 +294,6 @@ vdd_pre: sd2 {
regulator-max-microvolt = <1350000>;
regulator-enable-ramp-delay = <176>;
regulator-ramp-delay = <27500>;
- regulator-ramp-delay-scale = <350>;
regulator-always-on;
regulator-boot-on;
@@ -311,7 +308,6 @@ vdd_1v8: sd3 {
regulator-max-microvolt = <1800000>;
regulator-enable-ramp-delay = <242>;
regulator-ramp-delay = <27500>;
- regulator-ramp-delay-scale = <360>;
regulator-always-on;
regulator-boot-on;
@@ -326,7 +322,6 @@ vdd_sys_1v2: ldo0 {
regulator-max-microvolt = <1200000>;
regulator-enable-ramp-delay = <26>;
regulator-ramp-delay = <100000>;
- regulator-ramp-delay-scale = <200>;
regulator-always-on;
regulator-boot-on;
@@ -341,7 +336,6 @@ vdd_pex_1v05: ldo1 {
regulator-max-microvolt = <1050000>;
regulator-enable-ramp-delay = <22>;
regulator-ramp-delay = <100000>;
- regulator-ramp-delay-scale = <200>;
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
maxim,active-fps-power-up-slot = <0>;
@@ -354,7 +348,6 @@ vddio_sdmmc: ldo2 {
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <62>;
regulator-ramp-delay = <100000>;
- regulator-ramp-delay-scale = <200>;
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
maxim,active-fps-power-up-slot = <0>;
@@ -371,7 +364,6 @@ vdd_rtc: ldo4 {
regulator-max-microvolt = <1100000>;
regulator-enable-ramp-delay = <22>;
regulator-ramp-delay = <100000>;
- regulator-ramp-delay-scale = <200>;
regulator-disable-active-discharge;
regulator-always-on;
regulator-boot-on;
@@ -395,7 +387,6 @@ avdd_1v05_pll: ldo7 {
regulator-max-microvolt = <1050000>;
regulator-enable-ramp-delay = <24>;
regulator-ramp-delay = <100000>;
- regulator-ramp-delay-scale = <200>;
maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
maxim,active-fps-power-up-slot = <3>;
@@ -408,7 +399,6 @@ avdd_1v05: ldo8 {
regulator-max-microvolt = <1050000>;
regulator-enable-ramp-delay = <22>;
regulator-ramp-delay = <100000>;
- regulator-ramp-delay-scale = <200>;
maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
maxim,active-fps-power-up-slot = <6>;
--
2.47.2
next reply other threads:[~2025-03-05 22:49 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-05 22:49 Rob Herring (Arm) [this message]
-- strict thread matches above, loose matches on Subject: below --
2024-11-15 19:34 [PATCH] arm64: dts: nvidia: Remove unused and undocumented "regulator-ramp-delay-scale" property Rob Herring (Arm)
2025-01-09 22:54 ` Rob Herring
2025-02-13 20:29 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250305224936.2995519-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.