All of lore.kernel.org
 help / color / mirror / Atom feed
From: linux@treblig.org
To: arnd@arndb.de, lee@kernel.org, dmitry.torokhov@gmail.com,
	sre@kernel.org, lgirdwood@gmail.com, broonie@kernel.org,
	alexandre.belloni@bootlin.com, danielt@kernel.org,
	jingoohan1@gmail.com, deller@gmx.de, linus.walleij@linaro.org,
	brgl@bgdev.pl, tsbogend@alpha.franken.de
Cc: linux-mips@vger.kernel.org, linux-input@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-rtc@vger.kernel.org,
	dri-devel@lists.freedesktop.org, linux-fbdev@vger.kernel.org,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Dr. David Alan Gilbert" <linux@treblig.org>
Subject: [PATCH 7/9] power: supply: pcf50633: Remove charger
Date: Sun,  9 Mar 2025 19:36:10 +0000	[thread overview]
Message-ID: <20250309193612.251929-8-linux@treblig.org> (raw)
In-Reply-To: <20250309193612.251929-1-linux@treblig.org>

From: "Dr. David Alan Gilbert" <linux@treblig.org>

The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support")

See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/

Remove it.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
---
 drivers/power/supply/Kconfig            |   6 -
 drivers/power/supply/Makefile           |   1 -
 drivers/power/supply/pcf50633-charger.c | 466 ------------------------
 3 files changed, 473 deletions(-)
 delete mode 100644 drivers/power/supply/pcf50633-charger.c

diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 7b18358f194a..aa569badaf73 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -449,12 +449,6 @@ config CHARGER_88PM860X
 	help
 	  Say Y here to enable charger for Marvell 88PM860x chip.
 
-config CHARGER_PCF50633
-	tristate "NXP PCF50633 MBC"
-	depends on MFD_PCF50633
-	help
-	  Say Y to include support for NXP PCF50633 Main Battery Charger.
-
 config BATTERY_RX51
 	tristate "Nokia RX-51 (N900) battery driver"
 	depends on TWL4030_MADC
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index b55cc48a4c86..eedb00e377cb 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -62,7 +62,6 @@ obj-$(CONFIG_CHARGER_RT9467)	+= rt9467-charger.o
 obj-$(CONFIG_CHARGER_RT9471)	+= rt9471.o
 obj-$(CONFIG_BATTERY_TWL4030_MADC)	+= twl4030_madc_battery.o
 obj-$(CONFIG_CHARGER_88PM860X)	+= 88pm860x_charger.o
-obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
 obj-$(CONFIG_BATTERY_RX51)	+= rx51_battery.o
 obj-$(CONFIG_AB8500_BM)		+= ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o ab8500_chargalg.o
 obj-$(CONFIG_CHARGER_CPCAP)	+= cpcap-charger.o
diff --git a/drivers/power/supply/pcf50633-charger.c b/drivers/power/supply/pcf50633-charger.c
deleted file mode 100644
index 0136bc87b105..000000000000
--- a/drivers/power/supply/pcf50633-charger.c
+++ /dev/null
@@ -1,466 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/* NXP PCF50633 Main Battery Charger Driver
- *
- * (C) 2006-2008 by Openmoko, Inc.
- * Author: Balaji Rao <balajirrao@openmoko.org>
- * All rights reserved.
- *
- * Broken down from monstrous PCF50633 driver mainly by
- * Harald Welte, Andy Green and Werner Almesberger
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/sysfs.h>
-#include <linux/platform_device.h>
-#include <linux/power_supply.h>
-
-#include <linux/mfd/pcf50633/core.h>
-#include <linux/mfd/pcf50633/mbc.h>
-
-struct pcf50633_mbc {
-	struct pcf50633 *pcf;
-
-	int adapter_online;
-	int usb_online;
-
-	struct power_supply *usb;
-	struct power_supply *adapter;
-	struct power_supply *ac;
-};
-
-int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma)
-{
-	struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev);
-	int ret = 0;
-	u8 bits;
-	u8 mbcs2, chgmod;
-	unsigned int mbcc5;
-
-	if (ma >= 1000) {
-		bits = PCF50633_MBCC7_USB_1000mA;
-		ma = 1000;
-	} else if (ma >= 500) {
-		bits = PCF50633_MBCC7_USB_500mA;
-		ma = 500;
-	} else if (ma >= 100) {
-		bits = PCF50633_MBCC7_USB_100mA;
-		ma = 100;
-	} else {
-		bits = PCF50633_MBCC7_USB_SUSPEND;
-		ma = 0;
-	}
-
-	ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC7,
-					PCF50633_MBCC7_USB_MASK, bits);
-	if (ret)
-		dev_err(pcf->dev, "error setting usb curlim to %d mA\n", ma);
-	else
-		dev_info(pcf->dev, "usb curlim to %d mA\n", ma);
-
-	/*
-	 * We limit the charging current to be the USB current limit.
-	 * The reason is that on pcf50633, when it enters PMU Standby mode,
-	 * which it does when the device goes "off", the USB current limit
-	 * reverts to the variant default.  In at least one common case, that
-	 * default is 500mA.  By setting the charging current to be the same
-	 * as the USB limit we set here before PMU standby, we enforce it only
-	 * using the correct amount of current even when the USB current limit
-	 * gets reset to the wrong thing
-	 */
-
-	if (mbc->pcf->pdata->charger_reference_current_ma) {
-		mbcc5 = (ma << 8) / mbc->pcf->pdata->charger_reference_current_ma;
-		if (mbcc5 > 255)
-			mbcc5 = 255;
-		pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5);
-	}
-
-	mbcs2 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2);
-	chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
-
-	/* If chgmod == BATFULL, setting chgena has no effect.
-	 * Datasheet says we need to set resume instead but when autoresume is
-	 * used resume doesn't work. Clear and set chgena instead.
-	 */
-	if (chgmod != PCF50633_MBCS2_MBC_BAT_FULL)
-		pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
-				PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA);
-	else {
-		pcf50633_reg_clear_bits(pcf, PCF50633_REG_MBCC1,
-				PCF50633_MBCC1_CHGENA);
-		pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
-				PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA);
-	}
-
-	power_supply_changed(mbc->usb);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(pcf50633_mbc_usb_curlim_set);
-
-int pcf50633_mbc_get_status(struct pcf50633 *pcf)
-{
-	struct pcf50633_mbc *mbc  = platform_get_drvdata(pcf->mbc_pdev);
-	int status = 0;
-	u8 chgmod;
-
-	if (!mbc)
-		return 0;
-
-	chgmod = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2)
-		& PCF50633_MBCS2_MBC_MASK;
-
-	if (mbc->usb_online)
-		status |= PCF50633_MBC_USB_ONLINE;
-	if (chgmod == PCF50633_MBCS2_MBC_USB_PRE ||
-	    chgmod == PCF50633_MBCS2_MBC_USB_PRE_WAIT ||
-	    chgmod == PCF50633_MBCS2_MBC_USB_FAST ||
-	    chgmod == PCF50633_MBCS2_MBC_USB_FAST_WAIT)
-		status |= PCF50633_MBC_USB_ACTIVE;
-	if (mbc->adapter_online)
-		status |= PCF50633_MBC_ADAPTER_ONLINE;
-	if (chgmod == PCF50633_MBCS2_MBC_ADP_PRE ||
-	    chgmod == PCF50633_MBCS2_MBC_ADP_PRE_WAIT ||
-	    chgmod == PCF50633_MBCS2_MBC_ADP_FAST ||
-	    chgmod == PCF50633_MBCS2_MBC_ADP_FAST_WAIT)
-		status |= PCF50633_MBC_ADAPTER_ACTIVE;
-
-	return status;
-}
-EXPORT_SYMBOL_GPL(pcf50633_mbc_get_status);
-
-int pcf50633_mbc_get_usb_online_status(struct pcf50633 *pcf)
-{
-	struct pcf50633_mbc *mbc  = platform_get_drvdata(pcf->mbc_pdev);
-
-	if (!mbc)
-		return 0;
-
-	return mbc->usb_online;
-}
-EXPORT_SYMBOL_GPL(pcf50633_mbc_get_usb_online_status);
-
-static ssize_t
-show_chgmode(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
-
-	u8 mbcs2 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2);
-	u8 chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
-
-	return sysfs_emit(buf, "%d\n", chgmod);
-}
-static DEVICE_ATTR(chgmode, S_IRUGO, show_chgmode, NULL);
-
-static ssize_t
-show_usblim(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
-	u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
-						PCF50633_MBCC7_USB_MASK;
-	unsigned int ma;
-
-	if (usblim == PCF50633_MBCC7_USB_1000mA)
-		ma = 1000;
-	else if (usblim == PCF50633_MBCC7_USB_500mA)
-		ma = 500;
-	else if (usblim == PCF50633_MBCC7_USB_100mA)
-		ma = 100;
-	else
-		ma = 0;
-
-	return sysfs_emit(buf, "%u\n", ma);
-}
-
-static ssize_t set_usblim(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
-	unsigned long ma;
-	int ret;
-
-	ret = kstrtoul(buf, 10, &ma);
-	if (ret)
-		return ret;
-
-	pcf50633_mbc_usb_curlim_set(mbc->pcf, ma);
-
-	return count;
-}
-
-static DEVICE_ATTR(usb_curlim, S_IRUGO | S_IWUSR, show_usblim, set_usblim);
-
-static ssize_t
-show_chglim(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
-	u8 mbcc5 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC5);
-	unsigned int ma;
-
-	if (!mbc->pcf->pdata->charger_reference_current_ma)
-		return -ENODEV;
-
-	ma = (mbc->pcf->pdata->charger_reference_current_ma *  mbcc5) >> 8;
-
-	return sysfs_emit(buf, "%u\n", ma);
-}
-
-static ssize_t set_chglim(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
-	unsigned long ma;
-	unsigned int mbcc5;
-	int ret;
-
-	if (!mbc->pcf->pdata->charger_reference_current_ma)
-		return -ENODEV;
-
-	ret = kstrtoul(buf, 10, &ma);
-	if (ret)
-		return ret;
-
-	mbcc5 = (ma << 8) / mbc->pcf->pdata->charger_reference_current_ma;
-	if (mbcc5 > 255)
-		mbcc5 = 255;
-	pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5);
-
-	return count;
-}
-
-/*
- * This attribute allows to change MBC charging limit on the fly
- * independently of usb current limit. It also gets set automatically every
- * time usb current limit is changed.
- */
-static DEVICE_ATTR(chg_curlim, S_IRUGO | S_IWUSR, show_chglim, set_chglim);
-
-static struct attribute *pcf50633_mbc_sysfs_attrs[] = {
-	&dev_attr_chgmode.attr,
-	&dev_attr_usb_curlim.attr,
-	&dev_attr_chg_curlim.attr,
-	NULL,
-};
-
-ATTRIBUTE_GROUPS(pcf50633_mbc_sysfs);
-
-static void
-pcf50633_mbc_irq_handler(int irq, void *data)
-{
-	struct pcf50633_mbc *mbc = data;
-
-	/* USB */
-	if (irq == PCF50633_IRQ_USBINS) {
-		mbc->usb_online = 1;
-	} else if (irq == PCF50633_IRQ_USBREM) {
-		mbc->usb_online = 0;
-		pcf50633_mbc_usb_curlim_set(mbc->pcf, 0);
-	}
-
-	/* Adapter */
-	if (irq == PCF50633_IRQ_ADPINS)
-		mbc->adapter_online = 1;
-	else if (irq == PCF50633_IRQ_ADPREM)
-		mbc->adapter_online = 0;
-
-	power_supply_changed(mbc->ac);
-	power_supply_changed(mbc->usb);
-	power_supply_changed(mbc->adapter);
-
-	if (mbc->pcf->pdata->mbc_event_callback)
-		mbc->pcf->pdata->mbc_event_callback(mbc->pcf, irq);
-}
-
-static int adapter_get_property(struct power_supply *psy,
-			enum power_supply_property psp,
-			union power_supply_propval *val)
-{
-	struct pcf50633_mbc *mbc = power_supply_get_drvdata(psy);
-	int ret = 0;
-
-	switch (psp) {
-	case POWER_SUPPLY_PROP_ONLINE:
-		val->intval =  mbc->adapter_online;
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	return ret;
-}
-
-static int usb_get_property(struct power_supply *psy,
-			enum power_supply_property psp,
-			union power_supply_propval *val)
-{
-	struct pcf50633_mbc *mbc = power_supply_get_drvdata(psy);
-	int ret = 0;
-	u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
-						PCF50633_MBCC7_USB_MASK;
-
-	switch (psp) {
-	case POWER_SUPPLY_PROP_ONLINE:
-		val->intval = mbc->usb_online &&
-				(usblim <= PCF50633_MBCC7_USB_500mA);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	return ret;
-}
-
-static int ac_get_property(struct power_supply *psy,
-			enum power_supply_property psp,
-			union power_supply_propval *val)
-{
-	struct pcf50633_mbc *mbc = power_supply_get_drvdata(psy);
-	int ret = 0;
-	u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
-						PCF50633_MBCC7_USB_MASK;
-
-	switch (psp) {
-	case POWER_SUPPLY_PROP_ONLINE:
-		val->intval = mbc->usb_online &&
-				(usblim == PCF50633_MBCC7_USB_1000mA);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	return ret;
-}
-
-static enum power_supply_property power_props[] = {
-	POWER_SUPPLY_PROP_ONLINE,
-};
-
-static const u8 mbc_irq_handlers[] = {
-	PCF50633_IRQ_ADPINS,
-	PCF50633_IRQ_ADPREM,
-	PCF50633_IRQ_USBINS,
-	PCF50633_IRQ_USBREM,
-	PCF50633_IRQ_BATFULL,
-	PCF50633_IRQ_CHGHALT,
-	PCF50633_IRQ_THLIMON,
-	PCF50633_IRQ_THLIMOFF,
-	PCF50633_IRQ_USBLIMON,
-	PCF50633_IRQ_USBLIMOFF,
-	PCF50633_IRQ_LOWSYS,
-	PCF50633_IRQ_LOWBAT,
-};
-
-static const struct power_supply_desc pcf50633_mbc_adapter_desc = {
-	.name		= "adapter",
-	.type		= POWER_SUPPLY_TYPE_MAINS,
-	.properties	= power_props,
-	.num_properties	= ARRAY_SIZE(power_props),
-	.get_property	= &adapter_get_property,
-};
-
-static const struct power_supply_desc pcf50633_mbc_usb_desc = {
-	.name		= "usb",
-	.type		= POWER_SUPPLY_TYPE_USB,
-	.properties	= power_props,
-	.num_properties	= ARRAY_SIZE(power_props),
-	.get_property	= usb_get_property,
-};
-
-static const struct power_supply_desc pcf50633_mbc_ac_desc = {
-	.name		= "ac",
-	.type		= POWER_SUPPLY_TYPE_MAINS,
-	.properties	= power_props,
-	.num_properties	= ARRAY_SIZE(power_props),
-	.get_property	= ac_get_property,
-};
-
-static int pcf50633_mbc_probe(struct platform_device *pdev)
-{
-	struct power_supply_config psy_cfg = {};
-	struct power_supply_config usb_psy_cfg;
-	struct pcf50633_mbc *mbc;
-	int i;
-	u8 mbcs1;
-
-	mbc = devm_kzalloc(&pdev->dev, sizeof(*mbc), GFP_KERNEL);
-	if (!mbc)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, mbc);
-	mbc->pcf = dev_to_pcf50633(pdev->dev.parent);
-
-	/* Set up IRQ handlers */
-	for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
-		pcf50633_register_irq(mbc->pcf, mbc_irq_handlers[i],
-					pcf50633_mbc_irq_handler, mbc);
-
-	psy_cfg.supplied_to		= mbc->pcf->pdata->batteries;
-	psy_cfg.num_supplicants		= mbc->pcf->pdata->num_batteries;
-	psy_cfg.drv_data		= mbc;
-
-	/* Create power supplies */
-	mbc->adapter = devm_power_supply_register(&pdev->dev,
-						  &pcf50633_mbc_adapter_desc,
-						  &psy_cfg);
-	if (IS_ERR(mbc->adapter)) {
-		dev_err(mbc->pcf->dev, "failed to register adapter\n");
-		return PTR_ERR(mbc->adapter);
-	}
-
-	usb_psy_cfg = psy_cfg;
-	usb_psy_cfg.attr_grp = pcf50633_mbc_sysfs_groups;
-
-	mbc->usb = devm_power_supply_register(&pdev->dev,
-					      &pcf50633_mbc_usb_desc,
-					      &usb_psy_cfg);
-	if (IS_ERR(mbc->usb)) {
-		dev_err(mbc->pcf->dev, "failed to register usb\n");
-		return PTR_ERR(mbc->usb);
-	}
-
-	mbc->ac = devm_power_supply_register(&pdev->dev,
-					     &pcf50633_mbc_ac_desc,
-					     &psy_cfg);
-	if (IS_ERR(mbc->ac)) {
-		dev_err(mbc->pcf->dev, "failed to register ac\n");
-		return PTR_ERR(mbc->ac);
-	}
-
-	mbcs1 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS1);
-	if (mbcs1 & PCF50633_MBCS1_USBPRES)
-		pcf50633_mbc_irq_handler(PCF50633_IRQ_USBINS, mbc);
-	if (mbcs1 & PCF50633_MBCS1_ADAPTPRES)
-		pcf50633_mbc_irq_handler(PCF50633_IRQ_ADPINS, mbc);
-
-	return 0;
-}
-
-static void pcf50633_mbc_remove(struct platform_device *pdev)
-{
-	struct pcf50633_mbc *mbc = platform_get_drvdata(pdev);
-	int i;
-
-	/* Remove IRQ handlers */
-	for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
-		pcf50633_free_irq(mbc->pcf, mbc_irq_handlers[i]);
-}
-
-static struct platform_driver pcf50633_mbc_driver = {
-	.driver = {
-		.name = "pcf50633-mbc",
-	},
-	.probe = pcf50633_mbc_probe,
-	.remove = pcf50633_mbc_remove,
-};
-
-module_platform_driver(pcf50633_mbc_driver);
-
-MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
-MODULE_DESCRIPTION("PCF50633 mbc driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:pcf50633-mbc");
-- 
2.48.1


  parent reply	other threads:[~2025-03-09 19:37 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-09 19:36 [PATCH 0/9] Remove pcf50633 linux
2025-03-09 19:36 ` [PATCH 1/9] mfd: pcf50633-adc: Remove linux
2025-03-09 19:36 ` [PATCH 2/9] backlight: pcf50633-backlight: Remove linux
2025-03-09 19:36 ` [PATCH 3/9] rtc: pcf50633: Remove linux
2025-03-10 14:35   ` Alexandre Belloni
2025-03-09 19:36 ` [PATCH 4/9] mfd: pcF50633-gpio: Remove linux
2025-03-14 10:28   ` Linus Walleij
2025-03-09 19:36 ` [PATCH 5/9] Input: pcf50633-input - Remove linux
2025-03-10 16:56   ` Dmitry Torokhov
2025-03-09 19:36 ` [PATCH 6/9] regulator: pcf50633-regulator: Remove linux
2025-03-10 15:21   ` Mark Brown
2025-03-09 19:36 ` linux [this message]
2025-03-09 19:36 ` [PATCH 8/9] mfd: pcf50633: Remove irq code linux
2025-03-09 19:36 ` [PATCH 9/9] mfd: pcf50633: Remove remains linux
2025-03-10  7:22 ` [PATCH 0/9] Remove pcf50633 Arnd Bergmann
2025-03-10 19:03 ` Dr. David Alan Gilbert
2025-03-11  1:51   ` Dr. David Alan Gilbert
2025-03-11 20:12 ` (subset) " Mark Brown
2025-03-11 21:05   ` Dr. David Alan Gilbert
2025-03-11 21:15     ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250309193612.251929-8-linux@treblig.org \
    --to=linux@treblig.org \
    --cc=alexandre.belloni@bootlin.com \
    --cc=arnd@arndb.de \
    --cc=brgl@bgdev.pl \
    --cc=broonie@kernel.org \
    --cc=danielt@kernel.org \
    --cc=deller@gmx.de \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jingoohan1@gmail.com \
    --cc=lee@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=sre@kernel.org \
    --cc=tsbogend@alpha.franken.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.