All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fabiano Rosas <farosas@suse.de>
To: qemu-devel@nongnu.org
Cc: Peter Xu <peterx@redhat.com>,
	Steve Sistare <steven.sistare@oracle.com>,
	David Hildenbrand <david@redhat.com>
Subject: [PULL v2 2/3] migration: ram block cpr blockers
Date: Mon, 10 Mar 2025 19:34:39 -0300	[thread overview]
Message-ID: <20250310223440.31328-3-farosas@suse.de> (raw)
In-Reply-To: <20250310223440.31328-1-farosas@suse.de>

From: Steve Sistare <steven.sistare@oracle.com>

Unlike cpr-reboot mode, cpr-transfer mode cannot save volatile ram blocks
in the migration stream file and recreate them later, because the physical
memory for the blocks is pinned and registered for vfio.  Add a blocker
for volatile ram blocks.

Also add a blocker for RAM_GUEST_MEMFD.  Preserving guest_memfd may be
sufficient for CPR, but it has not been tested yet.

Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <1740667681-257312-1-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
---
 include/exec/memory.h   |  3 ++
 include/exec/ramblock.h |  1 +
 migration/savevm.c      |  2 ++
 system/physmem.c        | 66 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 72 insertions(+)

diff --git a/include/exec/memory.h b/include/exec/memory.h
index 78c4e0aec8..d09af58c97 100644
--- a/include/exec/memory.h
+++ b/include/exec/memory.h
@@ -3203,6 +3203,9 @@ bool ram_block_discard_is_disabled(void);
  */
 bool ram_block_discard_is_required(void);
 
+void ram_block_add_cpr_blocker(RAMBlock *rb, Error **errp);
+void ram_block_del_cpr_blocker(RAMBlock *rb);
+
 #endif
 
 #endif
diff --git a/include/exec/ramblock.h b/include/exec/ramblock.h
index 0babd105c0..64484cd821 100644
--- a/include/exec/ramblock.h
+++ b/include/exec/ramblock.h
@@ -39,6 +39,7 @@ struct RAMBlock {
     /* RCU-enabled, writes protected by the ramlist lock */
     QLIST_ENTRY(RAMBlock) next;
     QLIST_HEAD(, RAMBlockNotifier) ramblock_notifiers;
+    Error *cpr_blocker;
     int fd;
     uint64_t fd_offset;
     int guest_memfd;
diff --git a/migration/savevm.c b/migration/savevm.c
index 5c4fdfd95e..ce158c3512 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -3514,12 +3514,14 @@ void vmstate_register_ram(MemoryRegion *mr, DeviceState *dev)
     qemu_ram_set_idstr(mr->ram_block,
                        memory_region_name(mr), dev);
     qemu_ram_set_migratable(mr->ram_block);
+    ram_block_add_cpr_blocker(mr->ram_block, &error_fatal);
 }
 
 void vmstate_unregister_ram(MemoryRegion *mr, DeviceState *dev)
 {
     qemu_ram_unset_idstr(mr->ram_block);
     qemu_ram_unset_migratable(mr->ram_block);
+    ram_block_del_cpr_blocker(mr->ram_block);
 }
 
 void vmstate_register_ram_global(MemoryRegion *mr)
diff --git a/system/physmem.c b/system/physmem.c
index a6af555f4b..e97de3ef65 100644
--- a/system/physmem.c
+++ b/system/physmem.c
@@ -71,7 +71,10 @@
 
 #include "qemu/pmem.h"
 
+#include "qapi/qapi-types-migration.h"
+#include "migration/blocker.h"
 #include "migration/cpr.h"
+#include "migration/options.h"
 #include "migration/vmstate.h"
 
 #include "qemu/range.h"
@@ -1904,6 +1907,14 @@ static void ram_block_add(RAMBlock *new_block, Error **errp)
             qemu_mutex_unlock_ramlist();
             goto out_free;
         }
+
+        error_setg(&new_block->cpr_blocker,
+                   "Memory region %s uses guest_memfd, "
+                   "which is not supported with CPR.",
+                   memory_region_name(new_block->mr));
+        migrate_add_blocker_modes(&new_block->cpr_blocker, errp,
+                                  MIG_MODE_CPR_TRANSFER,
+                                  -1);
     }
 
     ram_size = (new_block->offset + new_block->max_length) >> TARGET_PAGE_BITS;
@@ -4095,3 +4106,58 @@ bool ram_block_discard_is_required(void)
     return qatomic_read(&ram_block_discard_required_cnt) ||
            qatomic_read(&ram_block_coordinated_discard_required_cnt);
 }
+
+/*
+ * Return true if ram is compatible with CPR.  Do not exclude rom,
+ * because the rom file could change in new QEMU.
+ */
+static bool ram_is_cpr_compatible(RAMBlock *rb)
+{
+    MemoryRegion *mr = rb->mr;
+
+    if (!mr || !memory_region_is_ram(mr)) {
+        return true;
+    }
+
+    /* Ram device is remapped in new QEMU */
+    if (memory_region_is_ram_device(mr)) {
+        return true;
+    }
+
+    /*
+     * A file descriptor is passed to new QEMU and remapped, or its backing
+     * file is reopened and mapped.  It must be shared to avoid COW.
+     */
+    if (rb->fd >= 0 && qemu_ram_is_shared(rb)) {
+        return true;
+    }
+
+    return false;
+}
+
+/*
+ * Add a blocker for each volatile ram block.  This function should only be
+ * called after we know that the block is migratable.  Non-migratable blocks
+ * are either re-created in new QEMU, or are handled specially, or are covered
+ * by a device-level CPR blocker.
+ */
+void ram_block_add_cpr_blocker(RAMBlock *rb, Error **errp)
+{
+    assert(qemu_ram_is_migratable(rb));
+
+    if (ram_is_cpr_compatible(rb)) {
+        return;
+    }
+
+    error_setg(&rb->cpr_blocker,
+               "Memory region %s is not compatible with CPR. share=on is "
+               "required for memory-backend objects, and aux-ram-share=on is "
+               "required.", memory_region_name(rb->mr));
+    migrate_add_blocker_modes(&rb->cpr_blocker, errp, MIG_MODE_CPR_TRANSFER,
+                              -1);
+}
+
+void ram_block_del_cpr_blocker(RAMBlock *rb)
+{
+    migrate_del_blocker(&rb->cpr_blocker);
+}
-- 
2.35.3



  parent reply	other threads:[~2025-03-10 22:35 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-10 22:34 [PULL v2 0/3] Migration patches for 2025-03-10 Fabiano Rosas
2025-03-10 22:34 ` [PULL v2 1/3] migration: Fix UAF for incoming migration on MigrationState Fabiano Rosas
2025-03-10 22:34 ` Fabiano Rosas [this message]
2025-03-10 22:34 ` [PULL v2 3/3] migration: Prioritize RDMA in ram_save_target_page() Fabiano Rosas
2025-03-11  5:04 ` [PULL v2 0/3] Migration patches for 2025-03-10 Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250310223440.31328-3-farosas@suse.de \
    --to=farosas@suse.de \
    --cc=david@redhat.com \
    --cc=peterx@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=steven.sistare@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.