From: Leon Romanovsky <leon@kernel.org>
To: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Cc: linux-rdma@vger.kernel.org, jgg@ziepe.ca, zyjzyj2000@gmail.com,
lizhijian@fujitsu.com
Subject: Re: [PATCH for-next v1 1/2] RDMA/rxe: Enable ODP in RDMA FLUSH operation
Date: Mon, 17 Mar 2025 20:22:47 +0200 [thread overview]
Message-ID: <20250317182247.GY1322339@unreal> (raw)
In-Reply-To: <20250314081056.3496708-2-matsuda-daisuke@fujitsu.com>
On Fri, Mar 14, 2025 at 05:10:55PM +0900, Daisuke Matsuda wrote:
> For persistent memories, add rxe_odp_flush_pmem_iova() so that ODP specific
> steps are executed. Otherwise, no additional consideration is required.
>
> Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
> ---
> drivers/infiniband/sw/rxe/rxe.c | 1 +
> drivers/infiniband/sw/rxe/rxe_loc.h | 7 +++
> drivers/infiniband/sw/rxe/rxe_odp.c | 73 ++++++++++++++++++++++++++--
> drivers/infiniband/sw/rxe/rxe_resp.c | 13 ++---
> include/rdma/ib_verbs.h | 1 +
> 5 files changed, 85 insertions(+), 10 deletions(-)
<...>
>
> +static unsigned long rxe_odp_iova_to_index(struct ib_umem_odp *umem_odp, u64 iova)
> +{
> + return (iova - ib_umem_start(umem_odp)) >> umem_odp->page_shift;
> +}
> +
> +static unsigned long rxe_odp_iova_to_page_offset(struct ib_umem_odp *umem_odp, u64 iova)
> +{
> + return iova & (BIT(umem_odp->page_shift) - 1);
> +}
> +
> static int rxe_odp_map_range_and_lock(struct rxe_mr *mr, u64 iova, int length, u32 flags)
> {
> struct ib_umem_odp *umem_odp = to_ib_umem_odp(mr->umem);
> @@ -190,8 +201,8 @@ static int __rxe_odp_mr_copy(struct rxe_mr *mr, u64 iova, void *addr,
> size_t offset;
> u8 *user_va;
>
> - idx = (iova - ib_umem_start(umem_odp)) >> umem_odp->page_shift;
> - offset = iova & (BIT(umem_odp->page_shift) - 1);
> + idx = rxe_odp_iova_to_index(umem_odp, iova);
> + offset = rxe_odp_iova_to_page_offset(umem_odp, iova);
>
> while (length > 0) {
> u8 *src, *dest;
> @@ -277,8 +288,8 @@ static int rxe_odp_do_atomic_op(struct rxe_mr *mr, u64 iova, int opcode,
> return RESPST_ERR_RKEY_VIOLATION;
> }
>
> - idx = (iova - ib_umem_start(umem_odp)) >> umem_odp->page_shift;
> - page_offset = iova & (BIT(umem_odp->page_shift) - 1);
> + idx = rxe_odp_iova_to_index(umem_odp, iova);
> + page_offset = rxe_odp_iova_to_page_offset(umem_odp, iova);
> page = hmm_pfn_to_page(umem_odp->pfn_list[idx]);
> if (!page)
> return RESPST_ERR_RKEY_VIOLATION;
> @@ -324,3 +335,57 @@ int rxe_odp_atomic_op(struct rxe_mr *mr, u64 iova, int opcode,
>
> return err;
> }
> +
> +int rxe_odp_flush_pmem_iova(struct rxe_mr *mr, u64 iova,
> + unsigned int length)
> +{
This function looks almost similar to existing rxe_flush_pmem_iova().
Can't you reuse existing functions instead of duplicating?
Thanks
> + struct ib_umem_odp *umem_odp = to_ib_umem_odp(mr->umem);
> + unsigned int page_offset;
> + unsigned long index;
> + struct page *page;
> + unsigned int bytes;
> + int err;
> + u8 *va;
> +
> + /* mr must be valid even if length is zero */
> + if (WARN_ON(!mr))
> + return -EINVAL;
> +
> + if (length == 0)
> + return 0;
> +
> + err = mr_check_range(mr, iova, length);
> + if (err)
> + return err;
> +
> + err = rxe_odp_map_range_and_lock(mr, iova, length,
> + RXE_PAGEFAULT_DEFAULT);
> + if (err)
> + return err;
> +
> + while (length > 0) {
> + index = rxe_odp_iova_to_index(umem_odp, iova);
> + page_offset = rxe_odp_iova_to_page_offset(umem_odp, iova);
> +
> + page = hmm_pfn_to_page(umem_odp->pfn_list[index]);
> + if (!page) {
> + mutex_unlock(&umem_odp->umem_mutex);
> + return -EFAULT;
> + }
> +
> + bytes = min_t(unsigned int, length,
> + mr_page_size(mr) - page_offset);
> +
> + va = kmap_local_page(page);
> + arch_wb_cache_pmem(va + page_offset, bytes);
> + kunmap_local(va);
> +
> + length -= bytes;
> + iova += bytes;
> + page_offset = 0;
> + }
> +
> + mutex_unlock(&umem_odp->umem_mutex);
> +
> + return 0;
> +}
next prev parent reply other threads:[~2025-03-17 18:22 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-14 8:10 [PATCH for-next v1 0/2] RDMA/rxe: RDMA FLUSH and ATOMIC WRITE with ODP Daisuke Matsuda
2025-03-14 8:10 ` [PATCH for-next v1 1/2] RDMA/rxe: Enable ODP in RDMA FLUSH operation Daisuke Matsuda
2025-03-15 19:23 ` Zhu Yanjun
2025-03-17 18:22 ` Leon Romanovsky [this message]
2025-03-18 9:47 ` Daisuke Matsuda (Fujitsu)
2025-03-14 8:10 ` [PATCH for-next v1 2/2] RDMA/rxe: Enable ODP in ATOMIC WRITE operation Daisuke Matsuda
2025-03-15 19:23 ` Zhu Yanjun
2025-03-15 19:21 ` [PATCH for-next v1 0/2] RDMA/rxe: RDMA FLUSH and ATOMIC WRITE with ODP Zhu Yanjun
2025-03-17 5:22 ` Daisuke Matsuda (Fujitsu)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250317182247.GY1322339@unreal \
--to=leon@kernel.org \
--cc=jgg@ziepe.ca \
--cc=linux-rdma@vger.kernel.org \
--cc=lizhijian@fujitsu.com \
--cc=matsuda-daisuke@fujitsu.com \
--cc=zyjzyj2000@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.