All of lore.kernel.org
 help / color / mirror / Atom feed
From: Leon Romanovsky <leon@kernel.org>
To: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Cc: linux-rdma@vger.kernel.org, jgg@ziepe.ca, zyjzyj2000@gmail.com,
	lizhijian@fujitsu.com
Subject: Re: [PATCH for-next v2 2/2] RDMA/rxe: Enable ODP in ATOMIC WRITE operation
Date: Tue, 18 Mar 2025 12:10:14 +0200	[thread overview]
Message-ID: <20250318101014.GA1322339@unreal> (raw)
In-Reply-To: <20250318094932.2643614-3-matsuda-daisuke@fujitsu.com>

On Tue, Mar 18, 2025 at 06:49:32PM +0900, Daisuke Matsuda wrote:
> Add rxe_odp_do_atomic_write() so that ODP specific steps are applied to
> ATOMIC WRITE requests.
> 
> Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
> ---
>  drivers/infiniband/sw/rxe/rxe.c      |  1 +
>  drivers/infiniband/sw/rxe/rxe_loc.h  |  5 +++
>  drivers/infiniband/sw/rxe/rxe_mr.c   | 12 -------
>  drivers/infiniband/sw/rxe/rxe_odp.c  | 53 ++++++++++++++++++++++++++++
>  drivers/infiniband/sw/rxe/rxe_resp.c | 11 +++++-
>  include/rdma/ib_verbs.h              |  1 +
>  6 files changed, 70 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/infiniband/sw/rxe/rxe.c b/drivers/infiniband/sw/rxe/rxe.c
> index df66f8f9efa1..21ce2d876b42 100644
> --- a/drivers/infiniband/sw/rxe/rxe.c
> +++ b/drivers/infiniband/sw/rxe/rxe.c
> @@ -110,6 +110,7 @@ static void rxe_init_device_param(struct rxe_dev *rxe)
>  		rxe->attr.odp_caps.per_transport_caps.rc_odp_caps |= IB_ODP_SUPPORT_ATOMIC;
>  		rxe->attr.odp_caps.per_transport_caps.rc_odp_caps |= IB_ODP_SUPPORT_SRQ_RECV;
>  		rxe->attr.odp_caps.per_transport_caps.rc_odp_caps |= IB_ODP_SUPPORT_FLUSH;
> +		rxe->attr.odp_caps.per_transport_caps.rc_odp_caps |= IB_ODP_SUPPORT_ATOMIC_WRITE;
>  	}
>  }

<...>

> +static inline int rxe_odp_do_atomic_write(struct rxe_mr *mr, u64 iova, u64 value)
> +{
> +	return RESPST_ERR_UNSUPPORTED_OPCODE;
> +}
>  #endif /* CONFIG_INFINIBAND_ON_DEMAND_PAGING */

You are returning "enum resp_states", while function expects to return "int". You should return -EOPNOTSUPP.

>  
>  #endif /* RXE_LOC_H */
> diff --git a/drivers/infiniband/sw/rxe/rxe_mr.c b/drivers/infiniband/sw/rxe/rxe_mr.c
> index 93e4b5acd3ac..d40fbe10633f 100644
> --- a/drivers/infiniband/sw/rxe/rxe_mr.c
> +++ b/drivers/infiniband/sw/rxe/rxe_mr.c
> @@ -547,16 +547,6 @@ int rxe_mr_do_atomic_write(struct rxe_mr *mr, u64 iova, u64 value)
>  	struct page *page;
>  	u64 *va;
>  
> -	/* ODP is not supported right now. WIP. */
> -	if (mr->umem->is_odp)
> -		return RESPST_ERR_UNSUPPORTED_OPCODE;
> -
> -	/* See IBA oA19-28 */
> -	if (unlikely(mr->state != RXE_MR_STATE_VALID)) {
> -		rxe_dbg_mr(mr, "mr not in valid state\n");
> -		return RESPST_ERR_RKEY_VIOLATION;
> -	}
> -
>  	if (mr->ibmr.type == IB_MR_TYPE_DMA) {
>  		page_offset = iova & (PAGE_SIZE - 1);
>  		page = ib_virt_dma_to_page(iova);
> @@ -584,10 +574,8 @@ int rxe_mr_do_atomic_write(struct rxe_mr *mr, u64 iova, u64 value)
>  	}
>  
>  	va = kmap_local_page(page);
> -
>  	/* Do atomic write after all prior operations have completed */
>  	smp_store_release(&va[page_offset >> 3], value);
> -
>  	kunmap_local(va);
>  
>  	return 0;
> diff --git a/drivers/infiniband/sw/rxe/rxe_odp.c b/drivers/infiniband/sw/rxe/rxe_odp.c
> index 9a9aae967486..f3443c604a7f 100644
> --- a/drivers/infiniband/sw/rxe/rxe_odp.c
> +++ b/drivers/infiniband/sw/rxe/rxe_odp.c
> @@ -378,3 +378,56 @@ int rxe_odp_flush_pmem_iova(struct rxe_mr *mr, u64 iova,
>  
>  	return 0;
>  }
> +
> +#if defined CONFIG_64BIT
> +/* only implemented or called for 64 bit architectures */
> +int rxe_odp_do_atomic_write(struct rxe_mr *mr, u64 iova, u64 value)
> +{
> +	struct ib_umem_odp *umem_odp = to_ib_umem_odp(mr->umem);
> +	unsigned int page_offset;
> +	unsigned long index;
> +	struct page *page;
> +	int err;
> +	u64 *va;
> +
> +	/* See IBA oA19-28 */
> +	err = mr_check_range(mr, iova, sizeof(value));
> +	if (unlikely(err)) {
> +		rxe_dbg_mr(mr, "iova out of range\n");
> +		return RESPST_ERR_RKEY_VIOLATION;

Please don't redefine returned errors.

> +	}

<...>

> +#else
> +int rxe_odp_do_atomic_write(struct rxe_mr *mr, u64 iova, u64 value)
> +{
> +	return RESPST_ERR_UNSUPPORTED_OPCODE;
> +}
> +#endif

You already have empty declaration in rxe_loc.h, use it.

Thanks

  reply	other threads:[~2025-03-18 10:10 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-18  9:49 [PATCH for-next v2 0/2] RDMA/rxe: RDMA FLUSH and ATOMIC WRITE with ODP Daisuke Matsuda
2025-03-18  9:49 ` [PATCH for-next v2 1/2] RDMA/rxe: Enable ODP in RDMA FLUSH operation Daisuke Matsuda
2025-03-20  6:59   ` Zhijian Li (Fujitsu)
2025-03-24  5:16     ` Daisuke Matsuda (Fujitsu)
2025-03-18  9:49 ` [PATCH for-next v2 2/2] RDMA/rxe: Enable ODP in ATOMIC WRITE operation Daisuke Matsuda
2025-03-18 10:10   ` Leon Romanovsky [this message]
2025-03-19  2:58     ` Daisuke Matsuda (Fujitsu)
2025-03-19  8:58       ` Leon Romanovsky
2025-03-24  8:05         ` Daisuke Matsuda (Fujitsu)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250318101014.GA1322339@unreal \
    --to=leon@kernel.org \
    --cc=jgg@ziepe.ca \
    --cc=linux-rdma@vger.kernel.org \
    --cc=lizhijian@fujitsu.com \
    --cc=matsuda-daisuke@fujitsu.com \
    --cc=zyjzyj2000@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.