[PATCH 1/2] drm/amd: Allow printing VanGogh OD SCLK levels without setting dpm to manual

[Mario Limonciello <superm1@kernel.org>]

From: Mario Limonciello <mario.limonciello@amd.com>

Several other ASICs allow printing OD SCLK levels without setting DPM
control to manual.  When OD is disabled it will show the range the
hardware supports. When OD is enabled it will show what values have
been programmed. Adjust VanGogh to work the same.

Cc: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Reported-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
 .../gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c  | 37 ++++++++-----------
 1 file changed, 15 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c
index a55ea76d73996..2c9869feba610 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c
@@ -666,7 +666,6 @@ static int vangogh_print_clk_levels(struct smu_context *smu,
 {
 	DpmClocks_t *clk_table = smu->smu_table.clocks_table;
 	SmuMetrics_t metrics;
-	struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm);
 	int i, idx, size = 0, ret = 0;
 	uint32_t cur_value = 0, value = 0, count = 0;
 	bool cur_value_match_level = false;
@@ -682,31 +681,25 @@ static int vangogh_print_clk_levels(struct smu_context *smu,
 
 	switch (clk_type) {
 	case SMU_OD_SCLK:
-		if (smu_dpm_ctx->dpm_level == AMD_DPM_FORCED_LEVEL_MANUAL) {
-			size += sysfs_emit_at(buf, size, "%s:\n", "OD_SCLK");
-			size += sysfs_emit_at(buf, size, "0: %10uMhz\n",
-			(smu->gfx_actual_hard_min_freq > 0) ? smu->gfx_actual_hard_min_freq : smu->gfx_default_hard_min_freq);
-			size += sysfs_emit_at(buf, size, "1: %10uMhz\n",
-			(smu->gfx_actual_soft_max_freq > 0) ? smu->gfx_actual_soft_max_freq : smu->gfx_default_soft_max_freq);
-		}
+		size += sysfs_emit_at(buf, size, "%s:\n", "OD_SCLK");
+		size += sysfs_emit_at(buf, size, "0: %10uMhz\n",
+		(smu->gfx_actual_hard_min_freq > 0) ? smu->gfx_actual_hard_min_freq : smu->gfx_default_hard_min_freq);
+		size += sysfs_emit_at(buf, size, "1: %10uMhz\n",
+		(smu->gfx_actual_soft_max_freq > 0) ? smu->gfx_actual_soft_max_freq : smu->gfx_default_soft_max_freq);
 		break;
 	case SMU_OD_CCLK:
-		if (smu_dpm_ctx->dpm_level == AMD_DPM_FORCED_LEVEL_MANUAL) {
-			size += sysfs_emit_at(buf, size, "CCLK_RANGE in Core%d:\n",  smu->cpu_core_id_select);
-			size += sysfs_emit_at(buf, size, "0: %10uMhz\n",
-			(smu->cpu_actual_soft_min_freq > 0) ? smu->cpu_actual_soft_min_freq : smu->cpu_default_soft_min_freq);
-			size += sysfs_emit_at(buf, size, "1: %10uMhz\n",
-			(smu->cpu_actual_soft_max_freq > 0) ? smu->cpu_actual_soft_max_freq : smu->cpu_default_soft_max_freq);
-		}
+		size += sysfs_emit_at(buf, size, "CCLK_RANGE in Core%d:\n",  smu->cpu_core_id_select);
+		size += sysfs_emit_at(buf, size, "0: %10uMhz\n",
+		(smu->cpu_actual_soft_min_freq > 0) ? smu->cpu_actual_soft_min_freq : smu->cpu_default_soft_min_freq);
+		size += sysfs_emit_at(buf, size, "1: %10uMhz\n",
+		(smu->cpu_actual_soft_max_freq > 0) ? smu->cpu_actual_soft_max_freq : smu->cpu_default_soft_max_freq);
 		break;
 	case SMU_OD_RANGE:
-		if (smu_dpm_ctx->dpm_level == AMD_DPM_FORCED_LEVEL_MANUAL) {
-			size += sysfs_emit_at(buf, size, "%s:\n", "OD_RANGE");
-			size += sysfs_emit_at(buf, size, "SCLK: %7uMhz %10uMhz\n",
-				smu->gfx_default_hard_min_freq, smu->gfx_default_soft_max_freq);
-			size += sysfs_emit_at(buf, size, "CCLK: %7uMhz %10uMhz\n",
-				smu->cpu_default_soft_min_freq, smu->cpu_default_soft_max_freq);
-		}
+		size += sysfs_emit_at(buf, size, "%s:\n", "OD_RANGE");
+		size += sysfs_emit_at(buf, size, "SCLK: %7uMhz %10uMhz\n",
+			smu->gfx_default_hard_min_freq, smu->gfx_default_soft_max_freq);
+		size += sysfs_emit_at(buf, size, "CCLK: %7uMhz %10uMhz\n",
+			smu->cpu_default_soft_min_freq, smu->cpu_default_soft_max_freq);
 		break;
 	case SMU_SOCCLK:
 		/* the level 3 ~ 6 of socclk use the same frequency for vangogh */
-- 
2.43.0