Re: [PATCH 2/2] dt-bindings: pinctrl: mediatek: Correct indentation and style in DTS example

[Rob Herring <robh@kernel.org>]

On Mon, Mar 24, 2025 at 01:51:05PM +0100, Krzysztof Kozlowski wrote:
> DTS example in the bindings should be indented with 2- or 4-spaces and
> aligned with opening '- |', so correct any differences like 3-spaces or
> mixtures 2- and 4-spaces in one binding.
> 
> No functional changes here, but saves some comments during reviews of
> new patches built on existing code.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../pinctrl/mediatek,mt65xx-pinctrl.yaml      | 83 +++++++------------
>  .../pinctrl/mediatek,mt7622-pinctrl.yaml      | 48 +++++------
>  .../pinctrl/mediatek,mt8183-pinctrl.yaml      | 68 +++++++--------
>  .../pinctrl/mediatek,mt8192-pinctrl.yaml      | 76 ++++++++---------
>  4 files changed, 127 insertions(+), 148 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
> index 5f2808212f39..b9680b896f12 100644
> --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
> @@ -137,64 +137,43 @@ examples:
>          #size-cells = <2>;
>  
>          pinctrl@1c20800 {
> -          compatible = "mediatek,mt8135-pinctrl";
> -          reg = <0 0x1000B000 0 0x1000>;
> -          mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
> -          gpio-controller;
> -          #gpio-cells = <2>;
> -          interrupt-controller;
> -          #interrupt-cells = <2>;
> -          interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> -              <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> -              <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
> +            compatible = "mediatek,mt8135-pinctrl";
> +            reg = <0 0x1000B000 0 0x1000>;
> +            mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
> +            gpio-controller;
> +            #gpio-cells = <2>;
> +            interrupt-controller;
> +            #interrupt-cells = <2>;
> +            interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
>  
> -          i2c0_pins_a: i2c0-pins {
> -            pins1 {
> -              pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>,
> -                <MT8135_PIN_101_SCL0__FUNC_SCL0>;
> -              bias-disable;
> -            };
> -          };
> -
> -          i2c1_pins_a: i2c1-pins {
> -            pins {
> -              pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>,
> -                <MT8135_PIN_196_SCL1__FUNC_SCL1>;
> -              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> -            };
> -          };
> -
> -          i2c2_pins_a: i2c2-pins {
> -            pins1 {
> -              pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>;
> -              bias-pull-down;
> +            i2c0_pins_a: i2c0-pins {

Perhaps drop the unused labels while you are here. Either way,

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>