All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexander Baransky <sanyapilot496@gmail.com>
To: neil.armstrong@linaro.org, quic_jesszhan@quicinc.com,
	maarten.lankhorst@linux.intel.com, mripard@kernel.org,
	tzimmermann@suse.de, airlied@gmail.com, simona@ffwll.ch,
	robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org
Cc: Alexander Baransky <sanyapilot496@gmail.com>,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] drm/panel: Add Visionox G2647FB105 panel driver
Date: Tue, 25 Mar 2025 18:57:49 +0300	[thread overview]
Message-ID: <20250325155756.703907-3-sanyapilot496@gmail.com> (raw)
In-Reply-To: <20250325155756.703907-1-sanyapilot496@gmail.com>

Add the driver for Visionox G2647FB105 6.47" FHD Plus CMD mode AMOLED panel
support found in:
- Xiaomi Mi Note 10 / CC9 Pro (sm7150-xiaomi-tucana)
- Xiaomi Mi Note 10 Lite (sm7150-xiaomi-toco)

Signed-off-by: Alexander Baransky <sanyapilot496@gmail.com>
---
 drivers/gpu/drm/panel/Kconfig                 |   9 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-visionox-g2647fb105.c | 277 ++++++++++++++++++
 3 files changed, 287 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-visionox-g2647fb105.c

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index d7469c565d1d..c4de2749260d 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -977,6 +977,15 @@ config DRM_PANEL_TRULY_NT35597_WQXGA
 	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
 	  Video Mode panel
 
+config DRM_PANEL_VISIONOX_G2647FB105
+	tristate "Visionox G2647FB105"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the Visionox
+	  G2647FB105 (2340x1080@60Hz) AMOLED DSI cmd mode panel.
+
 config DRM_PANEL_VISIONOX_R66451
 	tristate "Visionox R66451"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 7dcf72646cac..31dc893e0b16 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -99,6 +99,7 @@ obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
 obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
 obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
 obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
+obj-$(CONFIG_DRM_PANEL_VISIONOX_G2647FB105) += panel-visionox-g2647fb105.o
 obj-$(CONFIG_DRM_PANEL_VISIONOX_RM69299) += panel-visionox-rm69299.o
 obj-$(CONFIG_DRM_PANEL_VISIONOX_VTDR6130) += panel-visionox-vtdr6130.o
 obj-$(CONFIG_DRM_PANEL_VISIONOX_R66451) += panel-visionox-r66451.o
diff --git a/drivers/gpu/drm/panel/panel-visionox-g2647fb105.c b/drivers/gpu/drm/panel/panel-visionox-g2647fb105.c
new file mode 100644
index 000000000000..cf80310de13c
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-visionox-g2647fb105.c
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
+ *   Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *   Copyright (c) 2025, Alexander Baransky <sanyapilot496@gmail.com>
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+struct visionox_g2647fb105 {
+	struct drm_panel panel;
+	struct mipi_dsi_device *dsi;
+	struct gpio_desc *reset_gpio;
+	struct regulator_bulk_data supplies[4];
+};
+
+static inline
+struct visionox_g2647fb105 *to_visionox_g2647fb105(struct drm_panel *panel)
+{
+	return container_of(panel, struct visionox_g2647fb105, panel);
+}
+
+static void visionox_g2647fb105_reset(struct visionox_g2647fb105 *ctx)
+{
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	usleep_range(1000, 2000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	usleep_range(10000, 11000);
+}
+
+static int visionox_g2647fb105_on(struct visionox_g2647fb105 *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
+
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x70, 0x04);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfe, 0x40);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x4d, 0x32);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfe, 0x40);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xbe, 0x17);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xbf, 0xbb);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc0, 0xdd);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc1, 0xff);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfe, 0xd0);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x03, 0x24);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x04, 0x03);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfe, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc2, 0x08);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xfe, 0x00);
+
+	mipi_dsi_dcs_set_tear_on_multi(&dsi_ctx, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+	mipi_dsi_dcs_set_display_brightness_multi(&dsi_ctx, 0x0000);
+	mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
+	mipi_dsi_msleep(&dsi_ctx, 100);
+
+	mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
+
+	return dsi_ctx.accum_err;
+}
+
+static int visionox_g2647fb105_off(struct visionox_g2647fb105 *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
+
+	mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
+	mipi_dsi_msleep(&dsi_ctx, 50);
+
+	mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
+	mipi_dsi_msleep(&dsi_ctx, 20);
+
+	return dsi_ctx.accum_err;
+}
+
+static int visionox_g2647fb105_prepare(struct drm_panel *panel)
+{
+	struct visionox_g2647fb105 *ctx = to_visionox_g2647fb105(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enable regulators: %d\n", ret);
+		return ret;
+	}
+
+	visionox_g2647fb105_reset(ctx);
+
+	ret = visionox_g2647fb105_on(ctx);
+	if (ret < 0) {
+		dev_err(dev, "Failed to initialize panel: %d\n", ret);
+		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+		regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int visionox_g2647fb105_unprepare(struct drm_panel *panel)
+{
+	struct visionox_g2647fb105 *ctx = to_visionox_g2647fb105(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	ret = visionox_g2647fb105_off(ctx);
+	if (ret < 0)
+		dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+
+	return 0;
+}
+
+static const struct drm_display_mode visionox_g2647fb105_mode = {
+	.clock = (1080 + 28 + 4 + 36) * (2340 + 8 + 4 + 4) * 60 / 1000,
+	.hdisplay = 1080,
+	.hsync_start = 1080 + 28,
+	.hsync_end = 1080 + 28 + 4,
+	.htotal = 1080 + 28 + 4 + 36,
+	.vdisplay = 2340,
+	.vsync_start = 2340 + 8,
+	.vsync_end = 2340 + 8 + 4,
+	.vtotal = 2340 + 8 + 4 + 4,
+	.width_mm = 69,
+	.height_mm = 149,
+};
+
+static int visionox_g2647fb105_get_modes(struct drm_panel *panel,
+					struct drm_connector *connector)
+{
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, &visionox_g2647fb105_mode);
+	if (!mode)
+		return -ENOMEM;
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs visionox_g2647fb105_panel_funcs = {
+	.prepare = visionox_g2647fb105_prepare,
+	.unprepare = visionox_g2647fb105_unprepare,
+	.get_modes = visionox_g2647fb105_get_modes,
+};
+
+static int visionox_g2647fb105_bl_update_status(struct backlight_device *bl)
+{
+	struct mipi_dsi_device *dsi = bl_get_data(bl);
+	u16 brightness = backlight_get_brightness(bl);
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
+	if (ret < 0)
+		return ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	return 0;
+}
+
+static const struct backlight_ops visionox_g2647fb105_bl_ops = {
+	.update_status = visionox_g2647fb105_bl_update_status,
+};
+
+static struct backlight_device *
+visionox_g2647fb105_create_backlight(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	const struct backlight_properties props = {
+		.type = BACKLIGHT_RAW,
+		.brightness = 1023,
+		.max_brightness = 2047,
+	};
+
+	return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
+					      &visionox_g2647fb105_bl_ops, &props);
+}
+
+static int visionox_g2647fb105_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct visionox_g2647fb105 *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->supplies[0].supply = "vdd3p3";
+	ctx->supplies[1].supply = "vddio";
+	ctx->supplies[2].supply = "vsn";
+	ctx->supplies[3].supply = "vsp";
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+								ctx->supplies);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Failed to get regulators\n");
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+				     "Failed to get reset-gpios\n");
+
+	ctx->dsi = dsi;
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM;
+
+	ctx->panel.prepare_prev_first = true;
+
+	drm_panel_init(&ctx->panel, dev, &visionox_g2647fb105_panel_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+	ctx->panel.prepare_prev_first = true;
+
+	ctx->panel.backlight = visionox_g2647fb105_create_backlight(dsi);
+	if (IS_ERR(ctx->panel.backlight))
+		return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
+				     "Failed to create backlight\n");
+
+	drm_panel_add(&ctx->panel);
+
+	ret = devm_mipi_dsi_attach(dev, dsi);
+	if (ret < 0) {
+		drm_panel_remove(&ctx->panel);
+		return dev_err_probe(dev, ret, "Failed to attach to DSI host\n");
+	}
+
+	return 0;
+}
+
+static void visionox_g2647fb105_remove(struct mipi_dsi_device *dsi)
+{
+	struct visionox_g2647fb105 *ctx = mipi_dsi_get_drvdata(dsi);
+	drm_panel_remove(&ctx->panel);
+}
+
+static const struct of_device_id visionox_g2647fb105_of_match[] = {
+	{ .compatible = "visionox,g2647fb105" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, visionox_g2647fb105_of_match);
+
+static struct mipi_dsi_driver visionox_g2647fb105_driver = {
+	.probe = visionox_g2647fb105_probe,
+	.remove = visionox_g2647fb105_remove,
+	.driver = {
+		.name = "panel-visionox-g2647fb105",
+		.of_match_table = visionox_g2647fb105_of_match,
+	},
+};
+module_mipi_dsi_driver(visionox_g2647fb105_driver);
+
+MODULE_AUTHOR("Alexander Baransky <sanyapilot496@gmail.com>");
+MODULE_DESCRIPTION("DRM driver for Visionox G2647FB105 AMOLED DSI panel");
+MODULE_LICENSE("GPL");
-- 
2.49.0


  parent reply	other threads:[~2025-03-25 15:59 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-25 15:57 [PATCH 0/2] Add Visionox G2647FB105 panel support Alexander Baransky
2025-03-25 15:57 ` [PATCH 1/2] dt-bindings: display: panel: Add Visionox G2647FB105 Alexander Baransky
2025-03-25 16:35   ` Krzysztof Kozlowski
2025-03-25 16:38     ` Krzysztof Kozlowski
2025-03-25 18:16     ` Danila Tikhonov
2025-03-25 18:21       ` Krzysztof Kozlowski
2025-03-25 15:57 ` Alexander Baransky [this message]
2025-03-25 18:31   ` [PATCH 2/2] drm/panel: Add Visionox G2647FB105 panel driver Danila Tikhonov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250325155756.703907-3-sanyapilot496@gmail.com \
    --to=sanyapilot496@gmail.com \
    --cc=airlied@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=quic_jesszhan@quicinc.com \
    --cc=robh@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.