All of lore.kernel.org
 help / color / mirror / Atom feed
From: Raju Rangoju <Raju.Rangoju@amd.com>
To: <andrew+netdev@lunn.ch>, <davem@davemloft.net>,
	<edumazet@google.com>, <kuba@kernel.org>, <pabeni@redhat.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<Shyam-sundar.S-k@amd.com>, Raju Rangoju <Raju.Rangoju@amd.com>
Subject: [PATCH net-next 1/5] amd-xgbe: reorganize the code of XPCS access
Date: Tue, 8 Apr 2025 23:49:57 +0530	[thread overview]
Message-ID: <20250408182001.4072954-2-Raju.Rangoju@amd.com> (raw)
In-Reply-To: <20250408182001.4072954-1-Raju.Rangoju@amd.com>

The xgbe_{read/write}_mmd_regs_v* functions have common code which can
be moved to helper functions. Add new helper functions to calculate the
mmd_address for v1/v2 of xpcs access.

Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
---
 drivers/net/ethernet/amd/xgbe/xgbe-dev.c | 63 ++++++++++--------------
 1 file changed, 27 insertions(+), 36 deletions(-)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
index b51a3666dddb..ae82dc3ac460 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
@@ -1041,18 +1041,17 @@ static int xgbe_set_gpio(struct xgbe_prv_data *pdata, unsigned int gpio)
 	return 0;
 }
 
-static int xgbe_read_mmd_regs_v2(struct xgbe_prv_data *pdata, int prtad,
-				 int mmd_reg)
+static unsigned int get_mmd_address(struct xgbe_prv_data *pdata, int mmd_reg)
 {
-	unsigned long flags;
-	unsigned int mmd_address, index, offset;
-	int mmd_data;
-
-	if (mmd_reg & XGBE_ADDR_C45)
-		mmd_address = mmd_reg & ~XGBE_ADDR_C45;
-	else
-		mmd_address = (pdata->mdio_mmd << 16) | (mmd_reg & 0xffff);
+	return (mmd_reg & XGBE_ADDR_C45) ?
+		mmd_reg & ~XGBE_ADDR_C45 :
+		(pdata->mdio_mmd << 16) | (mmd_reg & 0xffff);
+}
 
+static void get_pcs_index_and_offset(struct xgbe_prv_data *pdata,
+				     unsigned int mmd_address,
+				     unsigned int *index, unsigned int *offset)
+{
 	/* The PCS registers are accessed using mmio. The underlying
 	 * management interface uses indirect addressing to access the MMD
 	 * register sets. This requires accessing of the PCS register in two
@@ -1063,8 +1062,20 @@ static int xgbe_read_mmd_regs_v2(struct xgbe_prv_data *pdata, int prtad,
 	 * offset 1 bit and reading 16 bits of data.
 	 */
 	mmd_address <<= 1;
-	index = mmd_address & ~pdata->xpcs_window_mask;
-	offset = pdata->xpcs_window + (mmd_address & pdata->xpcs_window_mask);
+	*index = mmd_address & ~pdata->xpcs_window_mask;
+	*offset = pdata->xpcs_window + (mmd_address & pdata->xpcs_window_mask);
+}
+
+static int xgbe_read_mmd_regs_v2(struct xgbe_prv_data *pdata, int prtad,
+				 int mmd_reg)
+{
+	unsigned long flags;
+	unsigned int mmd_address, index, offset;
+	int mmd_data;
+
+	mmd_address = get_mmd_address(pdata, mmd_reg);
+
+	get_pcs_index_and_offset(pdata, mmd_address, &index, &offset);
 
 	spin_lock_irqsave(&pdata->xpcs_lock, flags);
 	XPCS32_IOWRITE(pdata, pdata->xpcs_window_sel_reg, index);
@@ -1080,23 +1091,9 @@ static void xgbe_write_mmd_regs_v2(struct xgbe_prv_data *pdata, int prtad,
 	unsigned long flags;
 	unsigned int mmd_address, index, offset;
 
-	if (mmd_reg & XGBE_ADDR_C45)
-		mmd_address = mmd_reg & ~XGBE_ADDR_C45;
-	else
-		mmd_address = (pdata->mdio_mmd << 16) | (mmd_reg & 0xffff);
+	mmd_address = get_mmd_address(pdata, mmd_reg);
 
-	/* The PCS registers are accessed using mmio. The underlying
-	 * management interface uses indirect addressing to access the MMD
-	 * register sets. This requires accessing of the PCS register in two
-	 * phases, an address phase and a data phase.
-	 *
-	 * The mmio interface is based on 16-bit offsets and values. All
-	 * register offsets must therefore be adjusted by left shifting the
-	 * offset 1 bit and writing 16 bits of data.
-	 */
-	mmd_address <<= 1;
-	index = mmd_address & ~pdata->xpcs_window_mask;
-	offset = pdata->xpcs_window + (mmd_address & pdata->xpcs_window_mask);
+	get_pcs_index_and_offset(pdata, mmd_address, &index, &offset);
 
 	spin_lock_irqsave(&pdata->xpcs_lock, flags);
 	XPCS32_IOWRITE(pdata, pdata->xpcs_window_sel_reg, index);
@@ -1111,10 +1108,7 @@ static int xgbe_read_mmd_regs_v1(struct xgbe_prv_data *pdata, int prtad,
 	unsigned int mmd_address;
 	int mmd_data;
 
-	if (mmd_reg & XGBE_ADDR_C45)
-		mmd_address = mmd_reg & ~XGBE_ADDR_C45;
-	else
-		mmd_address = (pdata->mdio_mmd << 16) | (mmd_reg & 0xffff);
+	mmd_address = get_mmd_address(pdata, mmd_reg);
 
 	/* The PCS registers are accessed using mmio. The underlying APB3
 	 * management interface uses indirect addressing to access the MMD
@@ -1139,10 +1133,7 @@ static void xgbe_write_mmd_regs_v1(struct xgbe_prv_data *pdata, int prtad,
 	unsigned int mmd_address;
 	unsigned long flags;
 
-	if (mmd_reg & XGBE_ADDR_C45)
-		mmd_address = mmd_reg & ~XGBE_ADDR_C45;
-	else
-		mmd_address = (pdata->mdio_mmd << 16) | (mmd_reg & 0xffff);
+	mmd_address = get_mmd_address(pdata, mmd_reg);
 
 	/* The PCS registers are accessed using mmio. The underlying APB3
 	 * management interface uses indirect addressing to access the MMD
-- 
2.34.1


  reply	other threads:[~2025-04-08 18:20 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-08 18:19 [PATCH net-next 0/5] amd-xgbe: add support for AMD Crater Raju Rangoju
2025-04-08 18:19 ` Raju Rangoju [this message]
2025-04-11  8:33   ` [PATCH net-next 1/5] amd-xgbe: reorganize the code of XPCS access Larysa Zaremba
2025-04-14 12:19     ` Rangoju, Raju
2025-04-08 18:19 ` [PATCH net-next 2/5] amd-xgbe: reorganize the xgbe_pci_probe() code path Raju Rangoju
2025-04-11  9:05   ` Larysa Zaremba
2025-04-08 18:19 ` [PATCH net-next 3/5] amd-xgbe: add support for new XPCS routines Raju Rangoju
2025-04-11 10:18   ` Larysa Zaremba
2025-04-14 12:16     ` Rangoju, Raju
2025-04-14 15:41   ` Tom Lendacky
2025-04-14 17:21     ` Rangoju, Raju
2025-04-08 18:20 ` [PATCH net-next 4/5] amd-xgbe: Add XGBE_XPCS_ACCESS_V3 support to xgbe_pci_probe() Raju Rangoju
2025-04-08 18:20 ` [PATCH net-next 5/5] amd-xgbe: add support for new pci device id 0x1641 Raju Rangoju

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250408182001.4072954-2-Raju.Rangoju@amd.com \
    --to=raju.rangoju@amd.com \
    --cc=Shyam-sundar.S-k@amd.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.