[PATCH] accel/ivpu: Correct DCT interrupt handling

[Maciej Falkowski <maciej.falkowski@linux.intel.com>]

From: Karol Wachowski <karol.wachowski@intel.com>

Fix improper use of dct_active_percent field in DCT interrupt handler
causing DCT to never get enabled. Set dct_active_percent internally before
IPC to ensure correct driver value even if IPC fails.
Set default DCT value to 30 accordingly to HW architecture specification.

Fixes: a19bffb10c46 ("accel/ivpu: Implement DCT handling")
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
---
 drivers/accel/ivpu/ivpu_hw_btrs.h |  2 +-
 drivers/accel/ivpu/ivpu_pm.c      | 18 ++++++++++--------
 2 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/accel/ivpu/ivpu_hw_btrs.h b/drivers/accel/ivpu/ivpu_hw_btrs.h
index 300f749971d4..d2d82651976d 100644
--- a/drivers/accel/ivpu/ivpu_hw_btrs.h
+++ b/drivers/accel/ivpu/ivpu_hw_btrs.h
@@ -14,7 +14,7 @@
 #define PLL_PROFILING_FREQ_DEFAULT   38400000
 #define PLL_PROFILING_FREQ_HIGH      400000000
 
-#define DCT_DEFAULT_ACTIVE_PERCENT 15u
+#define DCT_DEFAULT_ACTIVE_PERCENT 30u
 #define DCT_PERIOD_US		   35300u
 
 int ivpu_hw_btrs_info_init(struct ivpu_device *vdev);
diff --git a/drivers/accel/ivpu/ivpu_pm.c b/drivers/accel/ivpu/ivpu_pm.c
index 1fe03fc16bbc..ea30db181cd7 100644
--- a/drivers/accel/ivpu/ivpu_pm.c
+++ b/drivers/accel/ivpu/ivpu_pm.c
@@ -448,16 +448,17 @@ int ivpu_pm_dct_enable(struct ivpu_device *vdev, u8 active_percent)
 	active_us = (DCT_PERIOD_US * active_percent) / 100;
 	inactive_us = DCT_PERIOD_US - active_us;
 
+	vdev->pm->dct_active_percent = active_percent;
+
+	ivpu_dbg(vdev, PM, "DCT requested %u%% (D0: %uus, D0i2: %uus)\n",
+		 active_percent, active_us, inactive_us);
+
 	ret = ivpu_jsm_dct_enable(vdev, active_us, inactive_us);
 	if (ret) {
 		ivpu_err_ratelimited(vdev, "Failed to enable DCT: %d\n", ret);
 		return ret;
 	}
 
-	vdev->pm->dct_active_percent = active_percent;
-
-	ivpu_dbg(vdev, PM, "DCT set to %u%% (D0: %uus, D0i2: %uus)\n",
-		 active_percent, active_us, inactive_us);
 	return 0;
 }
 
@@ -465,15 +466,16 @@ int ivpu_pm_dct_disable(struct ivpu_device *vdev)
 {
 	int ret;
 
+	vdev->pm->dct_active_percent = 0;
+
+	ivpu_dbg(vdev, PM, "DCT requested to be disabled\n");
+
 	ret = ivpu_jsm_dct_disable(vdev);
 	if (ret) {
 		ivpu_err_ratelimited(vdev, "Failed to disable DCT: %d\n", ret);
 		return ret;
 	}
 
-	vdev->pm->dct_active_percent = 0;
-
-	ivpu_dbg(vdev, PM, "DCT disabled\n");
 	return 0;
 }
 
@@ -486,7 +488,7 @@ void ivpu_pm_irq_dct_work_fn(struct work_struct *work)
 	if (ivpu_hw_btrs_dct_get_request(vdev, &enable))
 		return;
 
-	if (vdev->pm->dct_active_percent)
+	if (enable)
 		ret = ivpu_pm_dct_enable(vdev, DCT_DEFAULT_ACTIVE_PERCENT);
 	else
 		ret = ivpu_pm_dct_disable(vdev);
-- 
2.43.0