[PATCH] cpufreq: fix compile-test defaults

[Johan Hovold <johan+linaro@kernel.org>]

Commit 3f66425a4fc8 ("cpufreq: Enable COMPILE_TEST on Arm drivers")
enabled compile testing of most Arm CPUFreq drivers but left the
existing default values unchanged so that many drivers are enabled by
default whenever COMPILE_TEST is selected.

This specifically results in the S3C64XX CPUFreq driver being enabled
and initialised during boot of non-S3C64XX platforms with the following
error logged:

	cpufreq: Unable to obtain ARMCLK: -2

Fix the default values for drivers that can be compile tested and that
should be enabled by default when not compile testing.

Fixes: 3f66425a4fc8 ("cpufreq: Enable COMPILE_TEST on Arm drivers")
Cc: stable@vger.kernel.org	# 6.12
Cc: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/cpufreq/Kconfig.arm | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 4f9cb943d945..0d46402e3094 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -76,7 +76,7 @@ config ARM_VEXPRESS_SPC_CPUFREQ
 config ARM_BRCMSTB_AVS_CPUFREQ
 	tristate "Broadcom STB AVS CPUfreq driver"
 	depends on (ARCH_BRCMSTB && !ARM_SCMI_CPUFREQ) || COMPILE_TEST
-	default y
+	default y if ARCH_BRCMSTB && !ARM_SCMI_CPUFREQ
 	help
 	  Some Broadcom STB SoCs use a co-processor running proprietary firmware
 	  ("AVS") to handle voltage and frequency scaling. This driver provides
@@ -88,7 +88,7 @@ config ARM_HIGHBANK_CPUFREQ
 	tristate "Calxeda Highbank-based"
 	depends on ARCH_HIGHBANK || COMPILE_TEST
 	depends on CPUFREQ_DT && REGULATOR && PL320_MBOX
-	default m
+	default m if ARCH_HIGHBANK
 	help
 	  This adds the CPUFreq driver for Calxeda Highbank SoC
 	  based boards.
@@ -133,7 +133,7 @@ config ARM_MEDIATEK_CPUFREQ
 config ARM_MEDIATEK_CPUFREQ_HW
 	tristate "MediaTek CPUFreq HW driver"
 	depends on ARCH_MEDIATEK || COMPILE_TEST
-	default m
+	default m if ARCH_MEDIATEK
 	help
 	  Support for the CPUFreq HW driver.
 	  Some MediaTek chipsets have a HW engine to offload the steps
@@ -181,7 +181,7 @@ config ARM_RASPBERRYPI_CPUFREQ
 config ARM_S3C64XX_CPUFREQ
 	bool "Samsung S3C64XX"
 	depends on CPU_S3C6410 || COMPILE_TEST
-	default y
+	default CPU_S3C6410
 	help
 	  This adds the CPUFreq driver for Samsung S3C6410 SoC.
 
@@ -190,7 +190,7 @@ config ARM_S3C64XX_CPUFREQ
 config ARM_S5PV210_CPUFREQ
 	bool "Samsung S5PV210 and S5PC110"
 	depends on CPU_S5PV210 || COMPILE_TEST
-	default y
+	default CPU_S5PV210
 	help
 	  This adds the CPUFreq driver for Samsung S5PV210 and
 	  S5PC110 SoCs.
@@ -214,7 +214,7 @@ config ARM_SCMI_CPUFREQ
 config ARM_SPEAR_CPUFREQ
 	bool "SPEAr CPUFreq support"
 	depends on PLAT_SPEAR || COMPILE_TEST
-	default y
+	default PLAT_SPEAR
 	help
 	  This adds the CPUFreq driver support for SPEAr SOCs.
 
@@ -233,7 +233,7 @@ config ARM_TEGRA20_CPUFREQ
 	tristate "Tegra20/30 CPUFreq support"
 	depends on ARCH_TEGRA || COMPILE_TEST
 	depends on CPUFREQ_DT
-	default y
+	default ARCH_TEGRA
 	help
 	  This adds the CPUFreq driver support for Tegra20/30 SOCs.
 
@@ -241,7 +241,7 @@ config ARM_TEGRA124_CPUFREQ
 	bool "Tegra124 CPUFreq support"
 	depends on ARCH_TEGRA || COMPILE_TEST
 	depends on CPUFREQ_DT
-	default y
+	default ARCH_TEGRA
 	help
 	  This adds the CPUFreq driver support for Tegra124 SOCs.
 
@@ -256,14 +256,14 @@ config ARM_TEGRA194_CPUFREQ
 	tristate "Tegra194 CPUFreq support"
 	depends on ARCH_TEGRA_194_SOC || ARCH_TEGRA_234_SOC || (64BIT && COMPILE_TEST)
 	depends on TEGRA_BPMP
-	default y
+	default ARCH_TEGRA_194_SOC || ARCH_TEGRA_234_SOC
 	help
 	  This adds CPU frequency driver support for Tegra194 SOCs.
 
 config ARM_TI_CPUFREQ
 	bool "Texas Instruments CPUFreq support"
 	depends on ARCH_OMAP2PLUS || ARCH_K3 || COMPILE_TEST
-	default y
+	default ARCH_OMAP2PLUS || ARCH_K3
 	help
 	  This driver enables valid OPPs on the running platform based on
 	  values contained within the SoC in use. Enable this in order to
-- 
2.49.0