From: max.oss.09@gmail.com
To: max.krummenacher@toradex.com
Cc: Conor Dooley <conor+dt@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Rob Herring <robh@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>,
devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v1] arm64: dts: imx8-apalis: Add PCIe and SATA support
Date: Wed, 16 Apr 2025 17:13:41 +0200 [thread overview]
Message-ID: <20250416151353.1692373-1-max.oss.09@gmail.com> (raw)
From: Max Krummenacher <max.krummenacher@toradex.com>
The needed drivers to support PCIe and SATA for i.MX 8QM have been
added.
Configure them for the Apalis iMX8 SoM.
The pciea and pcieb blocks each get a single PCIe lane, pciea is
available on the carrier boards while pcieb is connected to the
on module Wi-Fi/BT module.
The SATA lane is available on the carrier boards.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
---
.../boot/dts/freescale/imx8-apalis-eval.dtsi | 10 ++-
.../dts/freescale/imx8-apalis-ixora-v1.1.dtsi | 10 ++-
.../dts/freescale/imx8-apalis-ixora-v1.2.dtsi | 10 ++-
.../boot/dts/freescale/imx8-apalis-v1.1.dtsi | 70 ++++++++++++-------
.../boot/dts/freescale/imx8qm-apalis.dtsi | 10 ++-
5 files changed, 74 insertions(+), 36 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
index dc127298715b..311d4950793c 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
@@ -104,7 +104,10 @@ &lsio_pwm3 {
status = "okay";
};
-/* TODO: Apalis PCIE1 */
+/* Apalis PCIE1 */
+&pciea {
+ status = "okay";
+};
/* TODO: Apalis BKL1_PWM */
@@ -121,7 +124,10 @@ &sai5_lpcg {
status = "okay";
};
-/* TODO: Apalis SATA1 */
+/* Apalis SATA1 */
+&sata {
+ status = "okay";
+};
/* Apalis SPDIF1 */
&spdif0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
index d4a1ad528f65..3d8731504ce1 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
@@ -191,7 +191,10 @@ &lsio_pwm3 {
status = "okay";
};
-/* TODO: Apalis PCIE1 */
+/* Apalis PCIE1 */
+&pciea {
+ status = "okay";
+};
/* TODO: Apalis BKL1_PWM */
@@ -208,7 +211,10 @@ &sai5_lpcg {
status = "okay";
};
-/* TODO: Apalis SATA1 */
+/* Apalis SATA1 */
+&sata {
+ status = "okay";
+};
/* Apalis SPDIF1 */
&spdif0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
index 5e132c83e1b2..106e802a68ba 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
@@ -240,7 +240,10 @@ &lsio_pwm3 {
status = "okay";
};
-/* TODO: Apalis PCIE1 */
+/* Apalis PCIE1 */
+&pciea {
+ status = "okay";
+};
/* TODO: Apalis BKL1_PWM */
@@ -257,7 +260,10 @@ &sai5_lpcg {
status = "okay";
};
-/* TODO: Apalis SATA1 */
+/* Apalis SATA1 */
+&sata {
+ status = "okay";
+};
/* Apalis SPDIF1 */
&spdif0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
index dbea1eefdeec..6f27a9cc2494 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
@@ -339,6 +339,25 @@ &flexcan3 {
pinctrl-0 = <&pinctrl_flexcan3>;
};
+&hsio_phy {
+ fsl,hsio-cfg = "pciea-pcieb-sata";
+ fsl,refclk-pad-mode = "input";
+ status = "okay";
+};
+
+&hsio_refa_clk {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie_sata_refclk>;
+ enable-gpios = <&lsio_gpio4 11 GPIO_ACTIVE_HIGH>;
+};
+
+&hsio_refb_clk {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie_wifi_refclk>;
+ clocks = <&hsio_refa_clk>;
+ enable-gpios = <&lsio_gpio2 11 GPIO_ACTIVE_HIGH>;
+};
+
/* TODO: Apalis HDMI1 */
&gpu_alert0 {
@@ -514,7 +533,10 @@ &lsio_gpio0 {
"MXM3_112",
"MXM3_118",
"MXM3_114",
- "MXM3_116";
+ "MXM3_116",
+ "",
+ "",
+ "MXM3_26";
};
&lsio_gpio1 {
@@ -586,15 +608,6 @@ &lsio_gpio2 {
"MXM3_183",
"MXM3_185",
"MXM3_187";
-
- pcie-wifi-hog {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pcie_wifi_refclk>;
- gpio-hog;
- gpios = <11 GPIO_ACTIVE_HIGH>;
- line-name = "PCIE_WIFI_CLK";
- output-high;
- };
};
&lsio_gpio3 {
@@ -660,16 +673,6 @@ &lsio_gpio4 {
"MXM3_291",
"MXM3_289",
"MXM3_287";
-
- /* Enable pcie root / sata ref clock unconditionally */
- pcie-sata-hog {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pcie_sata_refclk>;
- gpio-hog;
- gpios = <11 GPIO_ACTIVE_HIGH>;
- line-name = "PCIE_SATA_CLK";
- output-high;
- };
};
&lsio_gpio5 {
@@ -771,9 +774,30 @@ &mu2_m0 {
status = "okay";
};
-/* TODO: Apalis PCIE1 */
+/* Apalis PCIE1 */
+&pciea {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reset_moci>;
+ phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+ phy-names = "pcie-phy";
+ reset-gpio = <&lsio_gpio0 30 GPIO_ACTIVE_LOW>;
+ vpcie-supply = <®_pcie_switch>;
+};
+
+/* On-module Wi-Fi */
+&pcieb {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcieb>, <&pinctrl_wifi>;
+ phys = <&hsio_phy 1 PHY_TYPE_PCIE 1>;
+ phy-names = "pcie-phy";
+ reset-gpio = <&lsio_gpio5 0 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
-/* TODO: On-module Wi-Fi */
+&phyx2_lpcg {
+ clocks = <&hsio_refa_clk>, <&hsio_refb_clk>,
+ <&hsio_refa_clk>, <&hsio_per_clk>;
+};
/* TODO: Apalis BKL1_PWM */
@@ -806,8 +830,6 @@ &sai5 {
<722534400>, <45158400>, <11289600>, <49152000>;
};
-/* TODO: Apalis SATA1 */
-
/* Apalis SPDIF1 */
&spdif0 {
assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
index c18f57039f6e..f97feee52c81 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
@@ -22,6 +22,10 @@ &fec1 {
phy-mode = "rgmii-rxid";
};
+&hsio_refa_clk {
+ enable-gpios = <&lsio_gpio4 27 GPIO_ACTIVE_HIGH>;
+};
+
/* TODO: Apalis HDMI1 */
/* Apalis I2C2 (DDC) */
@@ -188,12 +192,6 @@ &lsio_gpio4 {
"MXM3_291",
"MXM3_289",
"MXM3_287";
-
- /* Enable pcie root / sata ref clock unconditionally */
- pcie-sata-hog {
- gpios = <27 GPIO_ACTIVE_HIGH>;
- };
-
};
&lsio_gpio5 {
--
2.42.0
next reply other threads:[~2025-04-16 15:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-16 15:13 max.oss.09 [this message]
2025-04-25 3:03 ` [PATCH v1] arm64: dts: imx8-apalis: Add PCIe and SATA support Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250416151353.1692373-1-max.oss.09@gmail.com \
--to=max.oss.09@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=max.krummenacher@toradex.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.