From: <gregkh@linuxfoundation.org>
To: mingyen.hsieh@mediatek.com,cjorden@gmail.com,nbd@nbd.name,sean.wang@mediatek.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] wifi: mt76: mt7925: adjust rm BSS flow to prevent next" failed to apply to 6.12-stable tree
Date: Thu, 17 Apr 2025 12:54:43 +0200 [thread overview]
Message-ID: <2025041743-unwoven-sizzle-ba8b@gregkh> (raw)
The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x 0ebb60da8416c1d8e84c7e511a5687ce76a9467a
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2025041743-unwoven-sizzle-ba8b@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 0ebb60da8416c1d8e84c7e511a5687ce76a9467a Mon Sep 17 00:00:00 2001
From: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Date: Tue, 4 Mar 2025 16:08:49 -0800
Subject: [PATCH] wifi: mt76: mt7925: adjust rm BSS flow to prevent next
connection failure
Removing BSS without removing STAREC first will cause firmware
abnormal and next connection fail.
Fixes: 816161051a03 ("wifi: mt76: mt7925: Cleanup MLO settings post-disconnection")
Cc: stable@vger.kernel.org
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Caleb Jorden <cjorden@gmail.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250305000851.493671-4-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/main.c b/drivers/net/wireless/mediatek/mt76/mt7925/main.c
index dd886b39f550..2f6c687d0a05 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/main.c
@@ -1155,7 +1155,12 @@ static void mt7925_mac_link_sta_remove(struct mt76_dev *mdev,
struct mt792x_bss_conf *mconf;
mconf = mt792x_link_conf_to_mconf(link_conf);
- mt792x_mac_link_bss_remove(dev, mconf, mlink);
+
+ if (ieee80211_vif_is_mld(vif))
+ mt792x_mac_link_bss_remove(dev, mconf, mlink);
+ else
+ mt7925_mcu_add_bss_info(&dev->phy, mconf->mt76.ctx, link_conf,
+ link_sta, false);
}
spin_lock_bh(&mdev->sta_poll_lock);
@@ -1175,6 +1180,31 @@ mt7925_mac_sta_remove_links(struct mt792x_dev *dev, struct ieee80211_vif *vif,
struct mt76_wcid *wcid;
unsigned int link_id;
+ /* clean up bss before starec */
+ for_each_set_bit(link_id, &old_links, IEEE80211_MLD_MAX_NUM_LINKS) {
+ struct ieee80211_link_sta *link_sta;
+ struct ieee80211_bss_conf *link_conf;
+ struct mt792x_bss_conf *mconf;
+ struct mt792x_link_sta *mlink;
+
+ link_sta = mt792x_sta_to_link_sta(vif, sta, link_id);
+ if (!link_sta)
+ continue;
+
+ mlink = mt792x_sta_to_link(msta, link_id);
+ if (!mlink)
+ continue;
+
+ link_conf = mt792x_vif_to_bss_conf(vif, link_id);
+ if (!link_conf)
+ continue;
+
+ mconf = mt792x_link_conf_to_mconf(link_conf);
+
+ mt7925_mcu_add_bss_info(&dev->phy, mconf->mt76.ctx, link_conf,
+ link_sta, false);
+ }
+
for_each_set_bit(link_id, &old_links, IEEE80211_MLD_MAX_NUM_LINKS) {
struct ieee80211_link_sta *link_sta;
struct mt792x_link_sta *mlink;
@@ -1212,44 +1242,14 @@ void mt7925_mac_sta_remove(struct mt76_dev *mdev, struct ieee80211_vif *vif,
{
struct mt792x_dev *dev = container_of(mdev, struct mt792x_dev, mt76);
struct mt792x_sta *msta = (struct mt792x_sta *)sta->drv_priv;
- struct {
- struct {
- u8 omac_idx;
- u8 band_idx;
- __le16 pad;
- } __packed hdr;
- struct req_tlv {
- __le16 tag;
- __le16 len;
- u8 active;
- u8 link_idx; /* hw link idx */
- u8 omac_addr[ETH_ALEN];
- } __packed tlv;
- } dev_req = {
- .hdr = {
- .omac_idx = 0,
- .band_idx = 0,
- },
- .tlv = {
- .tag = cpu_to_le16(DEV_INFO_ACTIVE),
- .len = cpu_to_le16(sizeof(struct req_tlv)),
- .active = true,
- },
- };
unsigned long rem;
rem = ieee80211_vif_is_mld(vif) ? msta->valid_links : BIT(0);
mt7925_mac_sta_remove_links(dev, vif, sta, rem);
- if (ieee80211_vif_is_mld(vif)) {
- mt7925_mcu_set_dbdc(&dev->mphy, false);
-
- /* recovery omac address for the legacy interface */
- memcpy(dev_req.tlv.omac_addr, vif->addr, ETH_ALEN);
- mt76_mcu_send_msg(mdev, MCU_UNI_CMD(DEV_INFO_UPDATE),
- &dev_req, sizeof(dev_req), true);
- }
+ if (ieee80211_vif_is_mld(vif))
+ mt7925_mcu_del_dev(mdev, vif);
if (vif->type == NL80211_IFTYPE_STATION) {
struct mt792x_vif *mvif = (struct mt792x_vif *)vif->drv_priv;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
index ebe7cc30aaf9..d970243d64ff 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
@@ -2634,6 +2634,62 @@ int mt7925_mcu_set_timing(struct mt792x_phy *phy,
MCU_UNI_CMD(BSS_INFO_UPDATE), true);
}
+void mt7925_mcu_del_dev(struct mt76_dev *mdev,
+ struct ieee80211_vif *vif)
+{
+ struct mt76_vif_link *mvif = (struct mt76_vif_link *)vif->drv_priv;
+ struct {
+ struct {
+ u8 omac_idx;
+ u8 band_idx;
+ __le16 pad;
+ } __packed hdr;
+ struct req_tlv {
+ __le16 tag;
+ __le16 len;
+ u8 active;
+ u8 link_idx; /* hw link idx */
+ u8 omac_addr[ETH_ALEN];
+ } __packed tlv;
+ } dev_req = {
+ .tlv = {
+ .tag = cpu_to_le16(DEV_INFO_ACTIVE),
+ .len = cpu_to_le16(sizeof(struct req_tlv)),
+ .active = true,
+ },
+ };
+ struct {
+ struct {
+ u8 bss_idx;
+ u8 pad[3];
+ } __packed hdr;
+ struct mt76_connac_bss_basic_tlv basic;
+ } basic_req = {
+ .basic = {
+ .tag = cpu_to_le16(UNI_BSS_INFO_BASIC),
+ .len = cpu_to_le16(sizeof(struct mt76_connac_bss_basic_tlv)),
+ .active = true,
+ .conn_state = 1,
+ },
+ };
+
+ dev_req.hdr.omac_idx = mvif->omac_idx;
+ dev_req.hdr.band_idx = mvif->band_idx;
+
+ basic_req.hdr.bss_idx = mvif->idx;
+ basic_req.basic.omac_idx = mvif->omac_idx;
+ basic_req.basic.band_idx = mvif->band_idx;
+ basic_req.basic.link_idx = mvif->link_idx;
+
+ mt76_mcu_send_msg(mdev, MCU_UNI_CMD(BSS_INFO_UPDATE),
+ &basic_req, sizeof(basic_req), true);
+
+ /* recovery omac address for the legacy interface */
+ memcpy(dev_req.tlv.omac_addr, vif->addr, ETH_ALEN);
+ mt76_mcu_send_msg(mdev, MCU_UNI_CMD(DEV_INFO_UPDATE),
+ &dev_req, sizeof(dev_req), true);
+}
+
int mt7925_mcu_add_bss_info(struct mt792x_phy *phy,
struct ieee80211_chanctx_conf *ctx,
struct ieee80211_bss_conf *link_conf,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.h
index 6bf1623e542e..8ac43feb26d6 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.h
@@ -627,6 +627,8 @@ int mt7925_mcu_sched_scan_req(struct mt76_phy *phy,
int mt7925_mcu_sched_scan_enable(struct mt76_phy *phy,
struct ieee80211_vif *vif,
bool enable);
+void mt7925_mcu_del_dev(struct mt76_dev *mdev,
+ struct ieee80211_vif *vif);
int mt7925_mcu_add_bss_info(struct mt792x_phy *phy,
struct ieee80211_chanctx_conf *ctx,
struct ieee80211_bss_conf *link_conf,
next reply other threads:[~2025-04-17 10:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-17 10:54 gregkh [this message]
2025-07-24 14:49 ` [PATCH 6.12.y] wifi: mt76: mt7925: adjust rm BSS flow to prevent next connection failure Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2025041743-unwoven-sizzle-ba8b@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=cjorden@gmail.com \
--cc=mingyen.hsieh@mediatek.com \
--cc=nbd@nbd.name \
--cc=sean.wang@mediatek.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.