From: Pablo Neira Ayuso <pablo@netfilter.org>
To: netfilter-devel@vger.kernel.org
Cc: sbrivio@redhat.com
Subject: [PATCH nf-next,v2 1/2] netfilter: nft_set_pipapo: prevent overflow in lookup table allocation
Date: Tue, 22 Apr 2025 21:52:43 +0200 [thread overview]
Message-ID: <20250422195244.269803-1-pablo@netfilter.org> (raw)
When calculating the lookup table size, ensure the following
multiplication does not overflow:
- desc->field_len[] maximum value is U8_MAX multiplied by
NFT_PIPAPO_GROUPS_PER_BYTE(f) that can be 2, worst case.
- NFT_PIPAPO_BUCKETS(f->bb) is 2^8, worst case.
- sizeof(unsigned long), from sizeof(*f->lt), lt in
struct nft_pipapo_field.
Then, use check_mul_overflow() to multiply by bucket size and then use
check_add_overflow() to the alignment for avx2 (if needed). Finally, add
lt_size_check_overflow() helper and use it to consolidate this.
While at it, replace leftover allocation using the GFP_KERNEL to
GFP_KERNEL_ACCOUNT for consistency, in pipapo_resize().
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
---
v2: changes requested by Stefano.
net/netfilter/nft_set_pipapo.c | 58 ++++++++++++++++++++++++++--------
1 file changed, 44 insertions(+), 14 deletions(-)
diff --git a/net/netfilter/nft_set_pipapo.c b/net/netfilter/nft_set_pipapo.c
index 7be342b495f5..0529e4ef7520 100644
--- a/net/netfilter/nft_set_pipapo.c
+++ b/net/netfilter/nft_set_pipapo.c
@@ -683,6 +683,30 @@ static int pipapo_realloc_mt(struct nft_pipapo_field *f,
return 0;
}
+
+/**
+ * lt_calculate_size() - Get storage size for lookup table with overflow check
+ * @groups: Amount of bit groups
+ * @bb: Number of bits grouped together in lookup table buckets
+ * @bsize: Size of each bucket in lookup table, in longs
+ *
+ * Return: allocation size including alignment overhead, negative on overflow
+ */
+static ssize_t lt_calculate_size(unsigned int groups, unsigned int bb,
+ unsigned int bsize)
+{
+ ssize_t ret = groups * NFT_PIPAPO_BUCKETS(bb) * sizeof(long);
+
+ if (check_mul_overflow(ret, bsize, &ret))
+ return -1;
+ if (check_add_overflow(ret, NFT_PIPAPO_ALIGN_HEADROOM, &ret))
+ return -1;
+ if (ret > INT_MAX)
+ return -1;
+
+ return ret;
+}
+
/**
* pipapo_resize() - Resize lookup or mapping table, or both
* @f: Field containing lookup and mapping tables
@@ -701,6 +725,7 @@ static int pipapo_resize(struct nft_pipapo_field *f,
long *new_lt = NULL, *new_p, *old_lt = f->lt, *old_p;
unsigned int new_bucket_size, copy;
int group, bucket, err;
+ ssize_t lt_size;
if (rules >= NFT_PIPAPO_RULE0_MAX)
return -ENOSPC;
@@ -719,10 +744,11 @@ static int pipapo_resize(struct nft_pipapo_field *f,
else
copy = new_bucket_size;
- new_lt = kvzalloc(f->groups * NFT_PIPAPO_BUCKETS(f->bb) *
- new_bucket_size * sizeof(*new_lt) +
- NFT_PIPAPO_ALIGN_HEADROOM,
- GFP_KERNEL);
+ lt_size = lt_calculate_size(f->groups, f->bb, new_bucket_size);
+ if (lt_size < 0)
+ return -ENOMEM;
+
+ new_lt = kvzalloc(lt_size, GFP_KERNEL_ACCOUNT);
if (!new_lt)
return -ENOMEM;
@@ -907,7 +933,7 @@ static void pipapo_lt_bits_adjust(struct nft_pipapo_field *f)
{
unsigned int groups, bb;
unsigned long *new_lt;
- size_t lt_size;
+ ssize_t lt_size;
lt_size = f->groups * NFT_PIPAPO_BUCKETS(f->bb) * f->bsize *
sizeof(*f->lt);
@@ -917,15 +943,17 @@ static void pipapo_lt_bits_adjust(struct nft_pipapo_field *f)
groups = f->groups * 2;
bb = NFT_PIPAPO_GROUP_BITS_LARGE_SET;
- lt_size = groups * NFT_PIPAPO_BUCKETS(bb) * f->bsize *
- sizeof(*f->lt);
+ lt_size = lt_calculate_size(groups, bb, f->bsize);
+ if (lt_size < 0)
+ return;
} else if (f->bb == NFT_PIPAPO_GROUP_BITS_LARGE_SET &&
lt_size < NFT_PIPAPO_LT_SIZE_LOW) {
groups = f->groups / 2;
bb = NFT_PIPAPO_GROUP_BITS_SMALL_SET;
- lt_size = groups * NFT_PIPAPO_BUCKETS(bb) * f->bsize *
- sizeof(*f->lt);
+ lt_size = lt_calculate_size(groups, bb, f->bsize);
+ if (lt_size < 0)
+ return;
/* Don't increase group width if the resulting lookup table size
* would exceed the upper size threshold for a "small" set.
@@ -936,7 +964,7 @@ static void pipapo_lt_bits_adjust(struct nft_pipapo_field *f)
return;
}
- new_lt = kvzalloc(lt_size + NFT_PIPAPO_ALIGN_HEADROOM, GFP_KERNEL_ACCOUNT);
+ new_lt = kvzalloc(lt_size, GFP_KERNEL_ACCOUNT);
if (!new_lt)
return;
@@ -1451,13 +1479,15 @@ static struct nft_pipapo_match *pipapo_clone(struct nft_pipapo_match *old)
for (i = 0; i < old->field_count; i++) {
unsigned long *new_lt;
+ ssize_t lt_size;
memcpy(dst, src, offsetof(struct nft_pipapo_field, lt));
- new_lt = kvzalloc(src->groups * NFT_PIPAPO_BUCKETS(src->bb) *
- src->bsize * sizeof(*dst->lt) +
- NFT_PIPAPO_ALIGN_HEADROOM,
- GFP_KERNEL_ACCOUNT);
+ lt_size = lt_calculate_size(src->groups, src->bb, src->bsize);
+ if (lt_size < 0)
+ goto out_lt;
+
+ new_lt = kvzalloc(lt_size, GFP_KERNEL_ACCOUNT);
if (!new_lt)
goto out_lt;
--
2.30.2
next reply other threads:[~2025-04-22 19:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-22 19:52 Pablo Neira Ayuso [this message]
2025-04-22 19:52 ` [PATCH nf-next,v2 2/2] netfilter: nft_set_pipapo: clamp maximum map bucket size to INT_MAX Pablo Neira Ayuso
2025-04-23 9:05 ` [PATCH nf-next,v2 1/2] netfilter: nft_set_pipapo: prevent overflow in lookup table allocation Stefano Brivio
2025-05-05 11:18 ` Pablo Neira Ayuso
-- strict thread matches above, loose matches on Subject: below --
2025-04-10 10:04 Pablo Neira Ayuso
2025-04-10 17:24 ` Stefano Brivio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250422195244.269803-1-pablo@netfilter.org \
--to=pablo@netfilter.org \
--cc=netfilter-devel@vger.kernel.org \
--cc=sbrivio@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.