All of lore.kernel.org
 help / color / mirror / Atom feed
From: Heiko Carstens <hca@linux.ibm.com>
To: Harald Freudenberger <freude@linux.ibm.com>
Cc: dengler@linux.ibm.com, gor@linux.ibm.com, agordeev@linux.ibm.com,
	linux-s390@vger.kernel.org, herbert@gondor.apana.org.au,
	ifranzki@linux.ibm.com, fcallies@linux.ibm.com
Subject: Re: [PATCH v7 07/25] s390/zcrypt: Introduce cprb mempool for ep11 misc functions
Date: Thu, 24 Apr 2025 08:58:38 +0200	[thread overview]
Message-ID: <20250424065838.7083Bd6-hca@linux.ibm.com> (raw)
In-Reply-To: <20250423101535.143137-8-freude@linux.ibm.com>

On Wed, Apr 23, 2025 at 12:15:16PM +0200, Harald Freudenberger wrote:
> Introduce a cprb mempool for the zcrypt ep11 misc functions
> (zcrypt_ep11misc.*) do some preparation rework to support
> a do-not-allocate path through some zcrypt ep11 misc functions.
> 
> The mempool is controlled by the zcrypt module parameter
> "mempool_threshold" which shall control the minimal amount
> of memory items for CCA and EP11.
> 
> The mempool shall support "mempool_threshold" requests/replies
> in parallel which means for EP11 to hold a send and receive
> buffer memory per request. Each of this cprb space items is
> limited to 8 KB. So by default the mempool consumes
>   5 * 2 * 8KB = 80KB
> 
> If the mempool is depleted upon one ep11 misc functions is
> called with the ZCRYPT_XFLAG_NOMEMALLOC xflag set, the function
> will fail with -ENOMEM and the caller is responsible for taking
> further actions.
> 
> This is only part of an rework to support a new xflag
> ZCRYPT_XFLAG_NOMEMALLOC but not yet complete.
> 
> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
> Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
> ---
>  drivers/s390/crypto/zcrypt_api.c      |   6 ++
>  drivers/s390/crypto/zcrypt_ep11misc.c | 149 +++++++++++++++-----------
>  drivers/s390/crypto/zcrypt_ep11misc.h |   1 +
>  3 files changed, 95 insertions(+), 61 deletions(-)

clang says:

    CC [M]  drivers/s390/crypto/zcrypt_ep11misc.o
      drivers/s390/crypto/zcrypt_ep11misc.c:1041:6: warning: variable 'rep_pl_size' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
       1041 |         if (!req)
            |             ^~~~
      drivers/s390/crypto/zcrypt_ep11misc.c:1121:20: note: uninitialized use occurs here
       1121 |         free_cprbmem(rep, rep_pl_size, true, xflags);
            |                           ^~~~~~~~~~~
      drivers/s390/crypto/zcrypt_ep11misc.c:1041:2: note: remove the 'if' if its condition is always false
       1041 |         if (!req)
            |         ^~~~~~~~~
       1042 |                 goto out;
            |                 ~~~~~~~~
      drivers/s390/crypto/zcrypt_ep11misc.c:1028:33: note: initialize the variable 'rep_pl_size' to silence this warning
       1028 |         size_t req_pl_size, rep_pl_size;
            |                                        ^
            |                                         = 0
      1 warning generated.

> @@ -1095,9 +1117,8 @@ static int ep11_cryptsingle(u16 card, u16 domain,
>  	*outbufsize = n;
>  
>  out:
> -	kfree(req);
> -	kfree(rep);
> -	kfree(urb);
> +	free_cprbmem(req, req_pl_size, true, xflags);
> +	free_cprbmem(rep, rep_pl_size, true, xflags);
>  	return rc;
>  }

Which is this hunk.

In addition:

> @@ -1161,7 +1183,7 @@ static int _ep11_unwrapkey(u16 card, u16 domain,
>  	req_pl_size = sizeof(struct uw_req_pl) + (iv ? 16 : 0)
>  		+ ASN1TAGLEN(keksize) + ASN1TAGLEN(0)
>  		+ ASN1TAGLEN(pinblob_size) + ASN1TAGLEN(enckeysize);
> -	req = alloc_cprb(req_pl_size);
> +	req = alloc_cprbmem(req_pl_size, xflags);
>  	if (!req)
>  		goto out;
>  	req_pl = (struct uw_req_pl *)(((u8 *)req) + sizeof(*req));
> @@ -1197,22 +1219,19 @@ static int _ep11_unwrapkey(u16 card, u16 domain,
>  	p += asn1tag_write(p, 0x04, enckey, enckeysize);
>  
>  	/* reply cprb and payload */
> -	rep = alloc_cprb(sizeof(struct uw_rep_pl));
> +	rep = alloc_cprbmem(sizeof(struct uw_rep_pl), xflags);
>  	if (!rep)
>  		goto out;
>  	rep_pl = (struct uw_rep_pl *)(((u8 *)rep) + sizeof(*rep));
>  
>  	/* urb and target */
> -	urb = kmalloc(sizeof(*urb), GFP_KERNEL);
> -	if (!urb)
> -		goto out;
>  	target.ap_id = card;
>  	target.dom_id = domain;
> -	prep_urb(urb, &target, 1,
> +	prep_urb(&urb, &target, 1,
>  		 req, sizeof(*req) + req_pl_size,
>  		 rep, sizeof(*rep) + sizeof(*rep_pl));
>  
> -	rc = zcrypt_send_ep11_cprb(urb, 0);
> +	rc = zcrypt_send_ep11_cprb(&urb, xflags);
>  	if (rc) {
>  		ZCRYPT_DBF_ERR("%s zcrypt_send_ep11_cprb(card=%d dom=%d) failed, rc=%d\n",
>  			       __func__, (int)card, (int)domain, rc);
> @@ -1245,9 +1264,8 @@ static int _ep11_unwrapkey(u16 card, u16 domain,
>  	*keybufsize = rep_pl->data_len;
>  
>  out:
> -	kfree(req);
> -	kfree(rep);
> -	kfree(urb);
> +	free_cprbmem(req, req_pl_size, true, xflags);

This would lead to a memset() with destination address 0 if alloc_cprbmem()
fails.

> @@ -1319,15 +1337,16 @@ static int _ep11_wrapkey(u16 card, u16 domain,
>  	} __packed * rep_pl;
>  	struct ep11_cprb *req = NULL, *rep = NULL;
>  	struct ep11_target_dev target;
> -	struct ep11_urb *urb = NULL;
> +	struct ep11_urb urb;
>  	size_t req_pl_size;
>  	int api, rc = -ENOMEM;
>  	u8 *p;
> +	const u32 xflags = 0;
>  
>  	/* request cprb and payload */
>  	req_pl_size = sizeof(struct wk_req_pl) + (iv ? 16 : 0)
>  		+ ASN1TAGLEN(keysize) + 4;
> -	req = alloc_cprb(req_pl_size);
> +	req = alloc_cprbmem(req_pl_size, xflags);
>  	if (!req)
>  		goto out;
...
> @@ -1405,9 +1421,8 @@ static int _ep11_wrapkey(u16 card, u16 domain,
>  	*datasize = rep_pl->data_len;
>  
>  out:
> -	kfree(req);
> -	kfree(rep);
> -	kfree(urb);
> +	free_cprbmem(req, req_pl_size, true, xflags);

Same here.

Please check all error paths in all patches and resubmit.
I'm going to revert the whole series for now. Thanks!

  reply	other threads:[~2025-04-24  6:58 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-23 10:15 [PATCH v7 00/25] AP bus/zcrypt/pkey/paes no-mem-alloc patches Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 01/25] s390/ap: Move response_type struct into ap_msg struct Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 02/25] s390/ap/zcrypt: Rework AP message buffer allocation Harald Freudenberger
2025-04-24  6:45   ` Heiko Carstens
2025-04-23 10:15 ` [PATCH v7 03/25] s390/ap: Introduce ap message buffer pool Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 04/25] s390/zcrypt: Avoid alloc and copy of ep11 targets if kernelspace cprb Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 05/25] s390/ap/zcrypt: New xflag parameter Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 06/25] s390/zcrypt: Introduce cprb mempool for cca misc functions Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 07/25] s390/zcrypt: Introduce cprb mempool for ep11 " Harald Freudenberger
2025-04-24  6:58   ` Heiko Carstens [this message]
2025-04-23 10:15 ` [PATCH v7 08/25] s390/zcrypt: Rework zcrypt function zcrypt_device_status_mask_ext Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 09/25] s390/zcrypt: Introduce pre-allocated device status array for cca misc Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 10/25] s390/zcrypt: Introduce pre-allocated device status array for ep11 misc Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 11/25] s390/zcrypt: Remove unused functions from cca misc Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 12/25] s390/zcrypt: Remove CCA and EP11 card and domain info caches Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 13/25] s390/zcrypt: Rework cca findcard() implementation and callers Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 14/25] s390/zcrypt: Rework ep11 " Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 15/25] s390/zcrypt: Rework cca misc functions kmallocs to use the cprb mempool Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 16/25] s390/zcrypt: Propagate xflags argument with cca_get_info() Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 17/25] s390/zcrypt: Locate ep11_domain_query_info onto the stack instead of kmalloc Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 18/25] s390/zcrypt: Rework ep11 misc functions to use cprb mempool Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 19/25] s390/pkey: Rework CCA pkey handler to use stack for small memory allocs Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 20/25] s390/pkey: Rework EP11 " Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 21/25] s390/uv: Rename find_secret() to uv_find_secret() and publish Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 22/25] s390/pkey: Use preallocated memory for retrieve of UV secret metadata Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 23/25] s390/uv: Remove uv_get_secret_metadata function Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 24/25] s390/pkey: Provide and pass xflags within pkey and zcrypt layers Harald Freudenberger
2025-04-23 10:15 ` [PATCH v7 25/25] s390/pkey/crypto: Introduce xflags param for pkey in-kernel API Harald Freudenberger
2025-04-23 10:40 ` [PATCH v7 00/25] AP bus/zcrypt/pkey/paes no-mem-alloc patches Heiko Carstens
2025-04-23 15:07   ` Harald Freudenberger
2025-04-23 15:15     ` Heiko Carstens

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250424065838.7083Bd6-hca@linux.ibm.com \
    --to=hca@linux.ibm.com \
    --cc=agordeev@linux.ibm.com \
    --cc=dengler@linux.ibm.com \
    --cc=fcallies@linux.ibm.com \
    --cc=freude@linux.ibm.com \
    --cc=gor@linux.ibm.com \
    --cc=herbert@gondor.apana.org.au \
    --cc=ifranzki@linux.ibm.com \
    --cc=linux-s390@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.