From: hoff.benjamin.k@gmail.com
To: linux-usb@vger.kernel.org
Cc: gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org,
Ben Hoff <hoff.benjamin.k@gmail.com>
Subject: [PATCH v2] usb: gadget: hid: allow dynamic interval configuration via configfs
Date: Tue, 29 Apr 2025 14:01:28 -0400 [thread overview]
Message-ID: <20250429180128.806780-1-hoff.benjamin.k@gmail.com> (raw)
From: Ben Hoff <hoff.benjamin.k@gmail.com>
This patch enhances the HID gadget driver to support dynamic configuration
of the interrupt polling interval (bInterval) via configfs. A new
‘interval’ attribute is exposed under each HID function’s configfs
directory, and any write to it will adjust the poll rate for all endpoints
without requiring a rebuild.
When the attribute has never been written, legacy defaults are preserved:
• Full-Speed (FS) endpoints (IN & OUT) poll every 10 ms
• High-Speed (HS) endpoints (IN & OUT) poll every 4 micro-frames
(~1 ms)
To implement this cleanly:
• Add two new fields to f_hid_opts and f_hidg:
– unsigned char interval
– bool interval_user_set
• Introduce dedicated f_hid_opts_interval_show/store functions.
The store routine parses into an unsigned int, bounds‐checks against
UCHAR_MAX, assigns to opts->interval, and sets
opts->interval_user_set = true.
• Remove the string-compare hack from the generic F_HID_OPT macro.
• Initialize opts->interval = 4 and opts->interval_user_set = false in
hidg_alloc_inst(), then copy both into the live f_hidg instance in
hidg_alloc().
• In hidg_bind(), set each endpoint’s bInterval based on whether the
user has written the attribute:
– If interval_user_set == false, use FS=10 / HS=4
– If interval_user_set == true, use the user’s value for both FS
& HS
• Add <limits.h> to support UCHAR_MAX in the store helper.
Changes since v1:
- Added dedicated interval_show/store helpers instead of macro hack.
- Restored original default values (FS=10 ms, HS=4 µ-frame) for both
IN and OUT when unset.
Signed-off-by: Ben Hoff <hoff.benjamin.k@gmail.com>
---
drivers/usb/gadget/function/f_hid.c | 119 ++++++++++++++++++++--------
drivers/usb/gadget/function/u_hid.h | 2 +
2 files changed, 90 insertions(+), 31 deletions(-)
diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index 740311c4fa24..3c4212929812 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -62,6 +62,9 @@ struct f_hidg {
unsigned short report_desc_length;
char *report_desc;
unsigned short report_length;
+ unsigned char interval;
+ bool interval_user_set;
+
/*
* use_out_ep - if true, the OUT Endpoint (interrupt out method)
* will be used to receive reports from the host
@@ -156,10 +159,7 @@ static struct usb_endpoint_descriptor hidg_ss_in_ep_desc = {
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_INT,
/*.wMaxPacketSize = DYNAMIC */
- .bInterval = 4, /* FIXME: Add this field in the
- * HID gadget configuration?
- * (struct hidg_func_descriptor)
- */
+ /*.bInterval = DYNAMIC */
};
static struct usb_ss_ep_comp_descriptor hidg_ss_in_comp_desc = {
@@ -177,10 +177,7 @@ static struct usb_endpoint_descriptor hidg_ss_out_ep_desc = {
.bEndpointAddress = USB_DIR_OUT,
.bmAttributes = USB_ENDPOINT_XFER_INT,
/*.wMaxPacketSize = DYNAMIC */
- .bInterval = 4, /* FIXME: Add this field in the
- * HID gadget configuration?
- * (struct hidg_func_descriptor)
- */
+ /*.bInterval = DYNAMIC */
};
static struct usb_ss_ep_comp_descriptor hidg_ss_out_comp_desc = {
@@ -218,10 +215,7 @@ static struct usb_endpoint_descriptor hidg_hs_in_ep_desc = {
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_INT,
/*.wMaxPacketSize = DYNAMIC */
- .bInterval = 4, /* FIXME: Add this field in the
- * HID gadget configuration?
- * (struct hidg_func_descriptor)
- */
+ /* .bInterval = DYNAMIC */
};
static struct usb_endpoint_descriptor hidg_hs_out_ep_desc = {
@@ -230,10 +224,7 @@ static struct usb_endpoint_descriptor hidg_hs_out_ep_desc = {
.bEndpointAddress = USB_DIR_OUT,
.bmAttributes = USB_ENDPOINT_XFER_INT,
/*.wMaxPacketSize = DYNAMIC */
- .bInterval = 4, /* FIXME: Add this field in the
- * HID gadget configuration?
- * (struct hidg_func_descriptor)
- */
+ /*.bInterval = DYNAMIC */
};
static struct usb_descriptor_header *hidg_hs_descriptors_intout[] = {
@@ -259,10 +250,7 @@ static struct usb_endpoint_descriptor hidg_fs_in_ep_desc = {
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_INT,
/*.wMaxPacketSize = DYNAMIC */
- .bInterval = 10, /* FIXME: Add this field in the
- * HID gadget configuration?
- * (struct hidg_func_descriptor)
- */
+ /*.bInterval = DYNAMIC */
};
static struct usb_endpoint_descriptor hidg_fs_out_ep_desc = {
@@ -271,10 +259,7 @@ static struct usb_endpoint_descriptor hidg_fs_out_ep_desc = {
.bEndpointAddress = USB_DIR_OUT,
.bmAttributes = USB_ENDPOINT_XFER_INT,
/*.wMaxPacketSize = DYNAMIC */
- .bInterval = 10, /* FIXME: Add this field in the
- * HID gadget configuration?
- * (struct hidg_func_descriptor)
- */
+ /*.bInterval = DYNAMIC */
};
static struct usb_descriptor_header *hidg_fs_descriptors_intout[] = {
@@ -1202,6 +1187,16 @@ static int hidg_bind(struct usb_configuration *c, struct usb_function *f)
hidg_hs_in_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
hidg_fs_in_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
hidg_ss_out_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
+
+ /* IN endpoints: FS default=10ms, HS default=4µ-frame; user override if set */
+ if (!hidg->interval_user_set) {
+ hidg_fs_in_ep_desc.bInterval = 10;
+ hidg_hs_in_ep_desc.bInterval = 4;
+ } else {
+ hidg_fs_in_ep_desc.bInterval = hidg->interval;
+ hidg_hs_in_ep_desc.bInterval = hidg->interval;
+ }
+
hidg_ss_out_comp_desc.wBytesPerInterval =
cpu_to_le16(hidg->report_length);
hidg_hs_out_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
@@ -1224,19 +1219,27 @@ static int hidg_bind(struct usb_configuration *c, struct usb_function *f)
hidg_ss_out_ep_desc.bEndpointAddress =
hidg_fs_out_ep_desc.bEndpointAddress;
- if (hidg->use_out_ep)
+ if (hidg->use_out_ep) {
+ /* OUT endpoints: same defaults (FS=10, HS=4) unless user set */
+ if (!hidg->interval_user_set) {
+ hidg_fs_out_ep_desc.bInterval = 10;
+ hidg_hs_out_ep_desc.bInterval = 4;
+ } else {
+ hidg_fs_out_ep_desc.bInterval = hidg->interval;
+ hidg_hs_out_ep_desc.bInterval = hidg->interval;
+ }
status = usb_assign_descriptors(f,
- hidg_fs_descriptors_intout,
- hidg_hs_descriptors_intout,
- hidg_ss_descriptors_intout,
- hidg_ss_descriptors_intout);
- else
+ hidg_fs_descriptors_intout,
+ hidg_hs_descriptors_intout,
+ hidg_ss_descriptors_intout,
+ hidg_ss_descriptors_intout);
+ } else {
status = usb_assign_descriptors(f,
hidg_fs_descriptors_ssreport,
hidg_hs_descriptors_ssreport,
hidg_ss_descriptors_ssreport,
hidg_ss_descriptors_ssreport);
-
+ }
if (status)
goto fail;
@@ -1408,6 +1411,53 @@ static ssize_t f_hid_opts_report_desc_store(struct config_item *item,
CONFIGFS_ATTR(f_hid_opts_, report_desc);
+static ssize_t f_hid_opts_interval_show(struct config_item *item, char *page)
+{
+ struct f_hid_opts *opts = to_f_hid_opts(item);
+ int result;
+
+ mutex_lock(&opts->lock);
+ result = sprintf(page, "%d\n", opts->interval);
+ mutex_unlock(&opts->lock);
+
+ return result;
+}
+
+static ssize_t f_hid_opts_interval_store(struct config_item *item,
+ const char *page, size_t len)
+{
+ struct f_hid_opts *opts = to_f_hid_opts(item);
+ int ret;
+ unsigned int tmp;
+
+ mutex_lock(&opts->lock);
+ if (opts->refcnt) {
+ ret = -EBUSY;
+ goto end;
+ }
+
+ /* parse into a wider type first */
+ ret = kstrtouint(page, 0, &tmp);
+ if (ret)
+ goto end;
+
+ /* range-check against unsigned char max */
+ if (tmp > 255) {
+ ret = -EINVAL;
+ goto end;
+ }
+
+ opts->interval = (unsigned char)tmp;
+ opts->interval_user_set = true;
+ ret = len;
+
+end:
+ mutex_unlock(&opts->lock);
+ return ret;
+}
+
+CONFIGFS_ATTR(f_hid_opts_, interval);
+
static ssize_t f_hid_opts_dev_show(struct config_item *item, char *page)
{
struct f_hid_opts *opts = to_f_hid_opts(item);
@@ -1422,6 +1472,7 @@ static struct configfs_attribute *hid_attrs[] = {
&f_hid_opts_attr_protocol,
&f_hid_opts_attr_no_out_endpoint,
&f_hid_opts_attr_report_length,
+ &f_hid_opts_attr_interval,
&f_hid_opts_attr_report_desc,
&f_hid_opts_attr_dev,
NULL,
@@ -1468,6 +1519,10 @@ static struct usb_function_instance *hidg_alloc_inst(void)
if (!opts)
return ERR_PTR(-ENOMEM);
mutex_init(&opts->lock);
+
+ opts->interval = 4;
+ opts->interval_user_set = false;
+
opts->func_inst.free_func_inst = hidg_free_inst;
ret = &opts->func_inst;
@@ -1546,6 +1601,8 @@ static struct usb_function *hidg_alloc(struct usb_function_instance *fi)
hidg->bInterfaceProtocol = opts->protocol;
hidg->report_length = opts->report_length;
hidg->report_desc_length = opts->report_desc_length;
+ hidg->interval = opts->interval;
+ hidg->interval_user_set = opts->interval_user_set;
if (opts->report_desc) {
hidg->report_desc = kmemdup(opts->report_desc,
opts->report_desc_length,
diff --git a/drivers/usb/gadget/function/u_hid.h b/drivers/usb/gadget/function/u_hid.h
index 84bb70292855..a9ed9720caee 100644
--- a/drivers/usb/gadget/function/u_hid.h
+++ b/drivers/usb/gadget/function/u_hid.h
@@ -25,6 +25,8 @@ struct f_hid_opts {
unsigned short report_desc_length;
unsigned char *report_desc;
bool report_desc_alloc;
+ unsigned char interval;
+ bool interval_user_set;
/*
* Protect the data form concurrent access by read/write
--
2.49.0
next reply other threads:[~2025-04-29 18:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-29 18:01 hoff.benjamin.k [this message]
2025-04-29 18:14 ` [PATCH v2] usb: gadget: hid: allow dynamic interval configuration via configfs Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250429180128.806780-1-hoff.benjamin.k@gmail.com \
--to=hoff.benjamin.k@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.