[PATCH rtw-next 00/11] wifi: rtw89: support MLO feature

[Ping-Ke Shih <pkshih@realtek.com>]

After adjusting code to control two HWs and TX/RX path, declaring MLO
capabilities and so on, start to support MLO feature by this patchset.
Currently only support MLSR with a simple rule to switch link. To test
and debug the flow to switch link, add a debugfs interface as a helper.

Po-Hao Huang (6):
  wifi: rtw89: allow driver to do specific band TX for MLO
  wifi: rtw89: send nullfunc based on the given link
  wifi: rtw89: add MLO track for MLSR switch decision
  wifi: rtw89: debug: extend dbgfs for MLO
  wifi: rtw89: debug: add MLD table dump
  wifi: rtw89: debug: add FW log component for MLO

Zong-Zhe Yang (5):
  wifi: rtw89: extract link part from core tx write function
  wifi: rtw89: chan: re-calculate MLO DBCC mode during setting channel
  wifi: rtw89: add handling of mlo_link_cfg H2C command and C2H event
  wifi: rtw89: debug: add mlo_mode dbgfs
  wifi: rtw89: declare MLO support if prerequisites are met

 drivers/net/wireless/realtek/rtw89/chan.c     |  32 +++
 drivers/net/wireless/realtek/rtw89/core.c     | 260 +++++++++++++++---
 drivers/net/wireless/realtek/rtw89/core.h     |  17 ++
 drivers/net/wireless/realtek/rtw89/debug.c    | 138 +++++++++-
 drivers/net/wireless/realtek/rtw89/fw.c       |  47 +++-
 drivers/net/wireless/realtek/rtw89/fw.h       |  49 ++++
 drivers/net/wireless/realtek/rtw89/mac.c      |  39 +++
 drivers/net/wireless/realtek/rtw89/mac.h      |  14 +
 drivers/net/wireless/realtek/rtw89/mac80211.c |   2 +
 drivers/net/wireless/realtek/rtw89/mac_be.c   |   1 +
 10 files changed, 556 insertions(+), 43 deletions(-)

-- 
2.25.1