From: Rob Herring <robh@kernel.org>
To: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>,
Stephen Boyd <sboyd@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
linux-amarula@amarulasolutions.com,
Abel Vesa <abelvesa@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Sascha Hauer <s.hauer@pengutronix.de>,
devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org
Subject: Re: [PATCH v12 16/19] dt-bindings: clock: imx8m-clock: add PLLs
Date: Fri, 9 May 2025 11:25:46 -0500 [thread overview]
Message-ID: <20250509162546.GA3704130-robh@kernel.org> (raw)
In-Reply-To: <20250424062154.2999219-17-dario.binacchi@amarulasolutions.com>
On Thu, Apr 24, 2025 at 08:21:46AM +0200, Dario Binacchi wrote:
> Though adding the PLLs to clocks and clock-names properties will break
> the ABI, it is required to accurately describe the hardware. Indeed,
> the Clock Control Module (CCM) receives clocks from the PLLs and
> oscillators and generates clocks for on-chip peripherals.
>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> (no changes since v11)
>
> Changes in v11:
> - Fix conflict while rebasing on master
>
> Changes in v7:
> - Add 'Reviewed-by' tag of Krzysztof Kozlowski
>
> Changes in v6:
> - New
>
> .../bindings/clock/imx8m-clock.yaml | 27 ++++++++++++++-----
> 1 file changed, 21 insertions(+), 6 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
> index 4fec55832702..e83f08abd44c 100644
> --- a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
> +++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
> @@ -29,12 +29,12 @@ properties:
> maxItems: 2
>
> clocks:
> - minItems: 6
> - maxItems: 7
> + minItems: 7
Increasing the minimum entries looks like an ABI break to me. The .dts
files not being in linux-next confirms that (from 0 warnings in
mainline):
arch/arm64/boot/dts/freescale:859:50
122 clock-controller@30380000 (fsl,imx8mm-ccm): clock-names: ['osc_32k', 'osc_24m', 'clk_ext1', 'clk_ext2', 'clk_ext3', 'clk_ext4'] is too short
120 clock-controller@30380000 (fsl,imx8mp-ccm): clock-names: ['osc_32k', 'osc_24m', 'clk_ext1', 'clk_ext2', 'clk_ext3', 'clk_ext4'] is too short
61 clock-controller@30360000 (fsl,imx8mm-anatop): 'clocks' is a required property
61 clock-controller@30360000 (fsl,imx8mm-anatop): 'clock-names' is a required property
60 clock-controller@30360000 (fsl,imx8mp-anatop): 'clocks' is a required property
60 clock-controller@30360000 (fsl,imx8mp-anatop): 'clock-names' is a required property
36 clock-controller@30380000 (fsl,imx8mp-ccm): clocks: [[35], [36], [37], [38], [39], [40]] is too short
36 clock-controller@30380000 (fsl,imx8mm-ccm): clocks: [[24], [25], [26], [27], [28], [29]] is too short
32 clock-controller@30380000 (fsl,imx8mp-ccm): clocks: [[34], [35], [36], [37], [38], [39]] is too short
28 clock-controller@30380000 (fsl,imx8mm-ccm): clocks: [[22], [23], [24], [25], [26], [27]] is too short
26 clock-controller@30380000 (fsl,imx8mn-ccm): clock-names: ['osc_32k', 'osc_24m', 'clk_ext1', 'clk_ext2', 'clk_ext3', 'clk_ext4'] is too short
17 clock-controller@30360000 (fsl,imx8mq-anatop): 'clocks' is a required property
17 clock-controller@30360000 (fsl,imx8mq-anatop): 'clock-names' is a required property
14 clock-controller@30380000 (fsl,imx8mp-ccm): clocks: [[44], [45], [46], [47], [48], [49]] is too short
14 clock-controller@30380000 (fsl,imx8mm-ccm): clocks: [[23], [24], [25], [26], [27], [28]] is too short
13 clock-controller@30360000 (fsl,imx8mn-anatop): 'clocks' is a required property
13 clock-controller@30360000 (fsl,imx8mn-anatop): 'clock-names' is a required property
12 clock-controller@30380000 (fsl,imx8mm-ccm): clocks: [[26], [27], [28], [29], [30], [31]] is too short
10 clock-controller@30380000 (fsl,imx8mp-ccm): clocks: [[38], [39], [40], [41], [42], [43]] is too short
8 clock-controller@30380000 (fsl,imx8mn-ccm): clocks: [[22], [23], [24], [25], [26], [27]] is too short
8 clock-controller@30380000 (fsl,imx8mn-ccm): clocks: [[20], [21], [22], [23], [24], [25]] is too short
8 clock-controller@30380000 (fsl,imx8mm-ccm): clocks: [[34], [35], [36], [37], [38], [39]] is too short
8 clock-controller@30380000 (fsl,imx8mm-ccm): clocks: [[28], [29], [30], [31], [32], [33]] is too short
8 bcrmf@1 (brcm,bcm4329-fmac): $nodename:0: 'bcrmf@1' does not match '^wifi(@.*)?$'
6 clock-controller@30380000 (fsl,imx8mp-ccm): clocks: [[41], [42], [43], [44], [45], [46]] is too short
6 clock-controller@30380000 (fsl,imx8mn-ccm): clocks: [[24], [25], [26], [27], [28], [29]] is too short
4 clock-controller@30380000 (fsl,imx8mp-ccm): clocks: [[43], [44], [45], [46], [47], [48]] is too short
4 clock-controller@30380000 (fsl,imx8mp-ccm): clocks: [[40], [41], [42], [43], [44], [45]] is too short
4 clock-controller@30380000 (fsl,imx8mp-ccm): clocks: [[36], [37], [38], [39], [40], [41]] is too short
4 clock-controller@30380000 (fsl,imx8mm-ccm): clocks: [[35], [36], [37], [38], [39], [40]] is too short
Please fix the binding or drop what's been applied so far.
Rob
next prev parent reply other threads:[~2025-05-09 16:25 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-24 6:21 [PATCH v12 00/19] Support spread spectrum clocking for i.MX8M PLLs Dario Binacchi
2025-04-24 6:21 ` [PATCH v12 01/19] dt-bindings: clock: imx8mm: add VIDEO_PLL clocks Dario Binacchi
2025-04-24 6:21 ` [PATCH v12 02/19] clk: imx8mm: rename video_pll1 to video_pll Dario Binacchi
2025-04-24 6:21 ` [PATCH v12 03/19] dt-bindings: clock: imx8mp: add VIDEO_PLL clocks Dario Binacchi
2025-04-24 6:21 ` [PATCH v12 04/19] clk: imx8mp: rename video_pll1 to video_pll Dario Binacchi
2025-04-24 6:21 ` [PATCH v12 05/19] dt-bindings: clock: imx8m-anatop: add oscillators and PLLs Dario Binacchi
2025-05-13 13:35 ` Krzysztof Kozlowski
2025-04-24 6:21 ` [PATCH v12 06/19] arm64: dts: imx8mm: add anatop clocks Dario Binacchi
2025-04-24 6:21 ` [PATCH v12 07/19] arm64: dts: imx8mn: " Dario Binacchi
2025-04-24 6:21 ` [PATCH v12 08/19] arm64: dts: imx8mp: " Dario Binacchi
2025-04-24 6:21 ` [PATCH v12 09/19] arm64: dts: imx8mq: " Dario Binacchi
2025-04-24 6:21 ` [PATCH v12 10/19] clk: imx: add hw API imx_anatop_get_clk_hw Dario Binacchi
2025-04-24 6:21 ` [PATCH v12 11/19] clk: imx: add support for i.MX8MM anatop clock driver Dario Binacchi
2025-05-09 1:52 ` Mark Brown
2025-05-09 8:34 ` Dario Binacchi
2025-05-09 9:00 ` Mark Brown
2025-05-09 12:45 ` Dario Binacchi
2025-05-16 11:54 ` Mark Brown
2025-04-24 6:21 ` [PATCH v12 12/19] clk: imx: add support for i.MX8MN " Dario Binacchi
2025-04-24 6:21 ` [PATCH v12 13/19] clk: imx: add support for i.MX8MP " Dario Binacchi
2025-04-24 6:21 ` [PATCH v12 14/19] clk: imx8mp: rename ccm_base to base Dario Binacchi
2025-04-24 6:21 ` [PATCH v12 15/19] arm64: dts: imx8mp-aristainetos3a-som-v1: don't replicate clk properties Dario Binacchi
2025-04-24 6:21 ` [PATCH v12 16/19] dt-bindings: clock: imx8m-clock: add PLLs Dario Binacchi
2025-05-09 16:25 ` Rob Herring [this message]
2025-05-09 18:22 ` Dario Binacchi
2025-05-13 13:24 ` Abel Vesa
2025-05-13 13:33 ` Krzysztof Kozlowski
2025-05-13 13:31 ` Krzysztof Kozlowski
2025-05-13 13:35 ` Krzysztof Kozlowski
2025-04-24 6:21 ` [PATCH v12 17/19] arm64: dts: imx8mm: add PLLs to clock controller module (CCM) Dario Binacchi
2025-04-24 6:21 ` [PATCH v12 18/19] arm64: dts: imx8mn: " Dario Binacchi
2025-04-24 6:21 ` [PATCH v12 19/19] arm64: dts: imx8mp: " Dario Binacchi
2025-05-05 7:52 ` (subset) [PATCH v12 00/19] Support spread spectrum clocking for i.MX8M PLLs Abel Vesa
2025-05-08 8:32 ` Dario Binacchi
2025-05-09 12:01 ` Shawn Guo
2025-05-09 12:43 ` Dario Binacchi
2025-05-13 13:34 ` Krzysztof Kozlowski
2025-05-23 15:19 ` Dario Binacchi
2025-05-27 18:42 ` Krzysztof Kozlowski
2025-05-27 19:32 ` Dario Binacchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250509162546.GA3704130-robh@kernel.org \
--to=robh@kernel.org \
--cc=abelvesa@kernel.org \
--cc=conor+dt@kernel.org \
--cc=dario.binacchi@amarulasolutions.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=peng.fan@nxp.com \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.