From: "Sheetal ." <sheetal@nvidia.com>
To: <lgirdwood@gmail.com>, <broonie@kernel.org>, <robh@kernel.org>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>
Cc: <linux-sound@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
<perex@perex.cz>, <tiwai@suse.com>,
Mohan Kumar D <mkumard@nvidia.com>, Sheetal <sheetal@nvidia.com>
Subject: [PATCH 3/3] ALSA: hda/tegra: Add Tegra264 support
Date: Mon, 12 May 2025 06:42:58 +0000 [thread overview]
Message-ID: <20250512064258.1028331-4-sheetal@nvidia.com> (raw)
In-Reply-To: <20250512064258.1028331-1-sheetal@nvidia.com>
From: Mohan Kumar D <mkumard@nvidia.com>
Update HDA driver to support Tegra264 differences from legacy HDA,
which includes: clocks/resets, always power on, and hardware-managed
FPCI/IPFS initialization. The driver retrieves this chip-specific
information from soc_data.
Signed-off-by: Mohan Kumar D <mkumard@nvidia.com>
Signed-off-by: Sheetal <sheetal@nvidia.com>
---
sound/pci/hda/hda_tegra.c | 51 +++++++++++++++++++++++++++++++++-----
sound/pci/hda/patch_hdmi.c | 1 +
2 files changed, 46 insertions(+), 6 deletions(-)
diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c
index a590d431c5ff..8c0dd439f5a5 100644
--- a/sound/pci/hda/hda_tegra.c
+++ b/sound/pci/hda/hda_tegra.c
@@ -72,6 +72,10 @@
struct hda_tegra_soc {
bool has_hda2codec_2x_reset;
bool has_hda2hdmi;
+ bool has_hda2codec_2x;
+ bool input_stream;
+ bool always_on;
+ bool requires_init;
};
struct hda_tegra {
@@ -187,7 +191,9 @@ static int hda_tegra_runtime_resume(struct device *dev)
if (rc != 0)
return rc;
if (chip->running) {
- hda_tegra_init(hda);
+ if (hda->soc->requires_init)
+ hda_tegra_init(hda);
+
azx_init_chip(chip, 1);
/* disable controller wake up event*/
azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) &
@@ -250,7 +256,8 @@ static int hda_tegra_init_chip(struct azx *chip, struct platform_device *pdev)
bus->remap_addr = hda->regs + HDA_BAR0;
bus->addr = res->start + HDA_BAR0;
- hda_tegra_init(hda);
+ if (hda->soc->requires_init)
+ hda_tegra_init(hda);
return 0;
}
@@ -323,7 +330,7 @@ static int hda_tegra_first_init(struct azx *chip, struct platform_device *pdev)
* starts with offset 0 which is wrong as HW register for output stream
* offset starts with 4.
*/
- if (of_device_is_compatible(np, "nvidia,tegra234-hda"))
+ if (!hda->soc->input_stream)
chip->capture_streams = 4;
chip->playback_streams = (gcap >> 12) & 0x0f;
@@ -419,7 +426,6 @@ static int hda_tegra_create(struct snd_card *card,
chip->driver_caps = driver_caps;
chip->driver_type = driver_caps & 0xff;
chip->dev_index = 0;
- chip->jackpoll_interval = msecs_to_jiffies(5000);
INIT_LIST_HEAD(&chip->pcm_list);
chip->codec_probe_mask = -1;
@@ -436,7 +442,16 @@ static int hda_tegra_create(struct snd_card *card,
chip->bus.core.sync_write = 0;
chip->bus.core.needs_damn_long_delay = 1;
chip->bus.core.aligned_mmio = 1;
- chip->bus.jackpoll_in_suspend = 1;
+
+ /*
+ * HDA power domain and clocks are always on for Tegra264 and
+ * the jack detection logic would work always, so no need of
+ * jack polling mechanism running.
+ */
+ if (!hda->soc->always_on) {
+ chip->jackpoll_interval = msecs_to_jiffies(5000);
+ chip->bus.jackpoll_in_suspend = 1;
+ }
err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
if (err < 0) {
@@ -450,22 +465,44 @@ static int hda_tegra_create(struct snd_card *card,
static const struct hda_tegra_soc tegra30_data = {
.has_hda2codec_2x_reset = true,
.has_hda2hdmi = true,
+ .has_hda2codec_2x = true,
+ .input_stream = true,
+ .always_on = false,
+ .requires_init = true,
};
static const struct hda_tegra_soc tegra194_data = {
.has_hda2codec_2x_reset = false,
.has_hda2hdmi = true,
+ .has_hda2codec_2x = true,
+ .input_stream = true,
+ .always_on = false,
+ .requires_init = true,
};
static const struct hda_tegra_soc tegra234_data = {
.has_hda2codec_2x_reset = true,
.has_hda2hdmi = false,
+ .has_hda2codec_2x = true,
+ .input_stream = false,
+ .always_on = false,
+ .requires_init = true,
+};
+
+static const struct hda_tegra_soc tegra264_data = {
+ .has_hda2codec_2x_reset = true,
+ .has_hda2hdmi = false,
+ .has_hda2codec_2x = false,
+ .input_stream = false,
+ .always_on = true,
+ .requires_init = false,
};
static const struct of_device_id hda_tegra_match[] = {
{ .compatible = "nvidia,tegra30-hda", .data = &tegra30_data },
{ .compatible = "nvidia,tegra194-hda", .data = &tegra194_data },
{ .compatible = "nvidia,tegra234-hda", .data = &tegra234_data },
+ { .compatible = "nvidia,tegra264-hda", .data = &tegra264_data },
{},
};
MODULE_DEVICE_TABLE(of, hda_tegra_match);
@@ -520,7 +557,9 @@ static int hda_tegra_probe(struct platform_device *pdev)
hda->clocks[hda->nclocks++].id = "hda";
if (hda->soc->has_hda2hdmi)
hda->clocks[hda->nclocks++].id = "hda2hdmi";
- hda->clocks[hda->nclocks++].id = "hda2codec_2x";
+
+ if (hda->soc->has_hda2codec_2x)
+ hda->clocks[hda->nclocks++].id = "hda2codec_2x";
err = devm_clk_bulk_get(&pdev->dev, hda->nclocks, hda->clocks);
if (err < 0)
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 7167989a8d86..6c860fda6648 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -4551,6 +4551,7 @@ HDA_CODEC_ENTRY(0x10de002e, "Tegra186 HDMI/DP1", patch_tegra_hdmi),
HDA_CODEC_ENTRY(0x10de002f, "Tegra194 HDMI/DP2", patch_tegra_hdmi),
HDA_CODEC_ENTRY(0x10de0030, "Tegra194 HDMI/DP3", patch_tegra_hdmi),
HDA_CODEC_ENTRY(0x10de0031, "Tegra234 HDMI/DP", patch_tegra234_hdmi),
+HDA_CODEC_ENTRY(0x10de0034, "Tegra264 HDMI/DP", patch_tegra234_hdmi),
HDA_CODEC_ENTRY(0x10de0040, "GPU 40 HDMI/DP", patch_nvhdmi),
HDA_CODEC_ENTRY(0x10de0041, "GPU 41 HDMI/DP", patch_nvhdmi),
HDA_CODEC_ENTRY(0x10de0042, "GPU 42 HDMI/DP", patch_nvhdmi),
--
2.17.1
next prev parent reply other threads:[~2025-05-12 6:43 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-12 6:42 [PATCH 0/2] HDA: Add Tegra264 support Sheetal .
2025-05-12 6:42 ` [PATCH 1/3] dt-bindings: Update Tegra194 and Tegra234 HDA bindings Sheetal .
2025-05-14 21:49 ` Rob Herring
2025-05-15 5:24 ` Sheetal .
2025-05-14 21:50 ` Rob Herring (Arm)
2025-05-12 6:42 ` [PATCH 2/3] dt-bindings: Document Tegra264 HDA Support Sheetal .
2025-05-14 21:52 ` Rob Herring (Arm)
2025-05-12 6:42 ` Sheetal . [this message]
2025-05-15 10:48 ` [PATCH 0/2] HDA: Add Tegra264 support Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250512064258.1028331-4-sheetal@nvidia.com \
--to=sheetal@nvidia.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mkumard@nvidia.com \
--cc=perex@perex.cz \
--cc=robh@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.