All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sean Anderson <sean.anderson@linux.dev>
To: netdev@vger.kernel.org, Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Russell King <linux@armlinux.org.uk>
Cc: upstream@airoha.com, Kory Maincent <kory.maincent@bootlin.com>,
	Simon Horman <horms@kernel.org>,
	Christian Marangi <ansuelsmth@gmail.com>,
	linux-kernel@vger.kernel.org,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Sean Anderson <sean.anderson@linux.dev>,
	Suraj Gupta <suraj.gupta2@amd.com>,
	Michal Simek <michal.simek@amd.com>,
	Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>,
	Robert Hancock <robert.hancock@calian.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [net-next PATCH v4 08/11] net: axienet: Convert to use PCS subsystem
Date: Mon, 12 May 2025 12:10:10 -0400	[thread overview]
Message-ID: <20250512161013.731955-9-sean.anderson@linux.dev> (raw)
In-Reply-To: <20250512161013.731955-1-sean.anderson@linux.dev>

Convert the AXI Ethernet driver to use the PCS subsystem, including the
new Xilinx PCA/PMA driver. Unfortunately, we must use a helper to work
with bare MDIO nodes without a compatible.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Suraj Gupta <suraj.gupta2@amd.com>
Tested-by: Suraj Gupta <suraj.gupta2@amd.com>

---

Changes in v4:
- Convert to dev-less pcs_put

Changes in v3:
- Select PCS_XILINX unconditionally

 drivers/net/ethernet/xilinx/Kconfig           |   7 ++
 drivers/net/ethernet/xilinx/xilinx_axienet.h  |   4 +-
 .../net/ethernet/xilinx/xilinx_axienet_main.c | 104 ++++--------------
 drivers/net/pcs/pcs-xilinx.c                  |   9 +-
 4 files changed, 31 insertions(+), 93 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig
index 7502214cc7d5..9f130376e1eb 100644
--- a/drivers/net/ethernet/xilinx/Kconfig
+++ b/drivers/net/ethernet/xilinx/Kconfig
@@ -25,8 +25,15 @@ config XILINX_EMACLITE
 
 config XILINX_AXI_EMAC
 	tristate "Xilinx 10/100/1000 AXI Ethernet support"
+	depends on COMMON_CLK
+	depends on GPIOLIB
 	depends on HAS_IOMEM
+	depends on OF
+	depends on PCS
 	depends on XILINX_DMA
+	select MDIO_DEVICE
+	select OF_DYNAMIC
+	select PCS_XILINX
 	select PHYLINK
 	select DIMLIB
 	help
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h
index 5ff742103beb..f46e862245eb 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -473,7 +473,6 @@ struct skbuf_dma_descriptor {
  * @dev:	Pointer to device structure
  * @phylink:	Pointer to phylink instance
  * @phylink_config: phylink configuration settings
- * @pcs_phy:	Reference to PCS/PMA PHY if used
  * @pcs:	phylink pcs structure for PCS PHY
  * @switch_x_sgmii: Whether switchable 1000BaseX/SGMII mode is enabled in the core
  * @axi_clk:	AXI4-Lite bus clock
@@ -553,8 +552,7 @@ struct axienet_local {
 	struct phylink *phylink;
 	struct phylink_config phylink_config;
 
-	struct mdio_device *pcs_phy;
-	struct phylink_pcs pcs;
+	struct phylink_pcs *pcs;
 
 	bool switch_x_sgmii;
 
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 054abf283ab3..9490ecb6fa43 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -35,6 +35,8 @@
 #include <linux/platform_device.h>
 #include <linux/skbuff.h>
 #include <linux/math64.h>
+#include <linux/pcs.h>
+#include <linux/pcs-xilinx.h>
 #include <linux/phy.h>
 #include <linux/mii.h>
 #include <linux/ethtool.h>
@@ -2519,63 +2521,6 @@ static const struct ethtool_ops axienet_ethtool_ops = {
 	.get_rmon_stats = axienet_ethtool_get_rmon_stats,
 };
 
-static struct axienet_local *pcs_to_axienet_local(struct phylink_pcs *pcs)
-{
-	return container_of(pcs, struct axienet_local, pcs);
-}
-
-static void axienet_pcs_get_state(struct phylink_pcs *pcs,
-				  unsigned int neg_mode,
-				  struct phylink_link_state *state)
-{
-	struct mdio_device *pcs_phy = pcs_to_axienet_local(pcs)->pcs_phy;
-
-	phylink_mii_c22_pcs_get_state(pcs_phy, neg_mode, state);
-}
-
-static void axienet_pcs_an_restart(struct phylink_pcs *pcs)
-{
-	struct mdio_device *pcs_phy = pcs_to_axienet_local(pcs)->pcs_phy;
-
-	phylink_mii_c22_pcs_an_restart(pcs_phy);
-}
-
-static int axienet_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
-			      phy_interface_t interface,
-			      const unsigned long *advertising,
-			      bool permit_pause_to_mac)
-{
-	struct mdio_device *pcs_phy = pcs_to_axienet_local(pcs)->pcs_phy;
-	struct net_device *ndev = pcs_to_axienet_local(pcs)->ndev;
-	struct axienet_local *lp = netdev_priv(ndev);
-	int ret;
-
-	if (lp->switch_x_sgmii) {
-		ret = mdiodev_write(pcs_phy, XLNX_MII_STD_SELECT_REG,
-				    interface == PHY_INTERFACE_MODE_SGMII ?
-					XLNX_MII_STD_SELECT_SGMII : 0);
-		if (ret < 0) {
-			netdev_warn(ndev,
-				    "Failed to switch PHY interface: %d\n",
-				    ret);
-			return ret;
-		}
-	}
-
-	ret = phylink_mii_c22_pcs_config(pcs_phy, interface, advertising,
-					 neg_mode);
-	if (ret < 0)
-		netdev_warn(ndev, "Failed to configure PCS: %d\n", ret);
-
-	return ret;
-}
-
-static const struct phylink_pcs_ops axienet_pcs_ops = {
-	.pcs_get_state = axienet_pcs_get_state,
-	.pcs_config = axienet_pcs_config,
-	.pcs_an_restart = axienet_pcs_an_restart,
-};
-
 static struct phylink_pcs *axienet_mac_select_pcs(struct phylink_config *config,
 						  phy_interface_t interface)
 {
@@ -2583,8 +2528,8 @@ static struct phylink_pcs *axienet_mac_select_pcs(struct phylink_config *config,
 	struct axienet_local *lp = netdev_priv(ndev);
 
 	if (interface == PHY_INTERFACE_MODE_1000BASEX ||
-	    interface ==  PHY_INTERFACE_MODE_SGMII)
-		return &lp->pcs;
+	    interface == PHY_INTERFACE_MODE_SGMII)
+		return lp->pcs;
 
 	return NULL;
 }
@@ -3056,28 +3001,23 @@ static int axienet_probe(struct platform_device *pdev)
 
 	if (lp->phy_mode == PHY_INTERFACE_MODE_SGMII ||
 	    lp->phy_mode == PHY_INTERFACE_MODE_1000BASEX) {
-		np = of_parse_phandle(pdev->dev.of_node, "pcs-handle", 0);
-		if (!np) {
-			/* Deprecated: Always use "pcs-handle" for pcs_phy.
-			 * Falling back to "phy-handle" here is only for
-			 * backward compatibility with old device trees.
-			 */
-			np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
-		}
-		if (!np) {
-			dev_err(&pdev->dev, "pcs-handle (preferred) or phy-handle required for 1000BaseX/SGMII\n");
-			ret = -EINVAL;
-			goto cleanup_mdio;
-		}
-		lp->pcs_phy = of_mdio_find_device(np);
-		if (!lp->pcs_phy) {
-			ret = -EPROBE_DEFER;
-			of_node_put(np);
+		DECLARE_PHY_INTERFACE_MASK(interfaces);
+
+		phy_interface_zero(interfaces);
+		if (lp->switch_x_sgmii ||
+		    lp->phy_mode == PHY_INTERFACE_MODE_SGMII)
+			__set_bit(PHY_INTERFACE_MODE_SGMII, interfaces);
+		if (lp->switch_x_sgmii ||
+		    lp->phy_mode == PHY_INTERFACE_MODE_1000BASEX)
+			__set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces);
+
+		lp->pcs = axienet_xilinx_pcs_get(&pdev->dev, interfaces);
+		if (IS_ERR(lp->pcs)) {
+			ret = PTR_ERR(lp->pcs);
+			dev_err_probe(&pdev->dev, ret,
+				      "could not get PCS for 1000BASE-X/SGMII\n");
 			goto cleanup_mdio;
 		}
-		of_node_put(np);
-		lp->pcs.ops = &axienet_pcs_ops;
-		lp->pcs.poll = true;
 	}
 
 	lp->phylink_config.dev = &ndev->dev;
@@ -3115,8 +3055,6 @@ static int axienet_probe(struct platform_device *pdev)
 	phylink_destroy(lp->phylink);
 
 cleanup_mdio:
-	if (lp->pcs_phy)
-		put_device(&lp->pcs_phy->dev);
 	if (lp->mii_bus)
 		axienet_mdio_teardown(lp);
 cleanup_clk:
@@ -3139,9 +3077,7 @@ static void axienet_remove(struct platform_device *pdev)
 	if (lp->phylink)
 		phylink_destroy(lp->phylink);
 
-	if (lp->pcs_phy)
-		put_device(&lp->pcs_phy->dev);
-
+	pcs_put(lp->pcs);
 	axienet_mdio_teardown(lp);
 
 	clk_bulk_disable_unprepare(XAE_NUM_MISC_CLOCKS, lp->misc_clks);
diff --git a/drivers/net/pcs/pcs-xilinx.c b/drivers/net/pcs/pcs-xilinx.c
index cc42e2a22cd2..6405949c1a75 100644
--- a/drivers/net/pcs/pcs-xilinx.c
+++ b/drivers/net/pcs/pcs-xilinx.c
@@ -354,10 +354,8 @@ static int xilinx_pcs_probe(struct mdio_device *mdiodev)
 
 	/* Sanity check */
 	ret = get_phy_c22_id(mdiodev->bus, mdiodev->addr, &phy_id);
-	if (ret) {
-		dev_err_probe(dev, ret, "could not read id\n");
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "could not read id\n");
 	if ((phy_id & 0xfffffff0) != 0x01740c00)
 		dev_warn(dev, "unknown phy id %x\n", phy_id);
 
@@ -448,8 +446,7 @@ static int axienet_xilinx_pcs_fixup(struct of_changeset *ocs,
 	if (ret)
 		return ret;
 
-	return of_changeset_add_prop_string(ocs, np, "compatible",
-					    "xlnx,pcs");
+	return of_changeset_add_prop_string(ocs, np, "compatible", "xlnx,pcs");
 #else
 	return -ENODEV;
 #endif
-- 
2.35.1.1320.gc452695387.dirty



  parent reply	other threads:[~2025-05-12 17:06 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-12 16:10 [net-next PATCH v4 00/11] Add PCS core support Sean Anderson
2025-05-12 16:10 ` [net-next PATCH v4 01/11] dt-bindings: net: Add Xilinx PCS Sean Anderson
2025-05-12 16:10 ` [net-next PATCH v4 02/11] net: phylink: Support setting PCS link change callbacks Sean Anderson
2025-05-12 16:10 ` [net-next PATCH v4 03/11] net: pcs: Add subsystem Sean Anderson
2025-05-14 16:22   ` Lei Wei
2025-05-19 17:43     ` Sean Anderson
2025-05-21 12:50       ` Lei Wei
2025-05-22 15:14         ` Sean Anderson
2025-05-12 16:10 ` [net-next PATCH v4 04/11] net: dsa: ocelot: suppress PHY device scanning on the internal MDIO bus Sean Anderson
2025-05-12 16:10 ` [net-next PATCH v4 05/11] net: pcs: lynx: Convert to an MDIO driver Sean Anderson
2025-05-12 16:10 ` [net-next PATCH v4 06/11] net: phy: Export some functions Sean Anderson
2025-05-15  2:57   ` Jakub Kicinski
2025-05-15  5:38     ` Heiner Kallweit
2025-05-19 18:17       ` Sean Anderson
2025-05-15  8:12     ` Russell King (Oracle)
2025-05-15  8:39       ` Christian Marangi (Ansuel)
2025-05-19 18:14       ` Sean Anderson
2025-05-19 15:29     ` Sean Anderson
2025-05-12 16:10 ` [net-next PATCH v4 07/11] net: pcs: Add Xilinx PCS driver Sean Anderson
2025-05-14 16:18   ` Lei Wei
2025-05-19 15:31     ` Sean Anderson
2025-05-12 16:10 ` Sean Anderson [this message]
2025-05-12 16:14 ` [net-next PATCH v4 09/11] net: macb: Move most of mac_config to mac_prepare Sean Anderson
2025-05-12 16:14   ` [net-next PATCH v4 10/11] net: macb: Support external PCSs Sean Anderson
2025-05-12 16:14   ` [net-next PATCH v4 11/11] of: property: Add device link support for PCS Sean Anderson
2025-05-13 15:29   ` [net-next PATCH v4 09/11] net: macb: Move most of mac_config to mac_prepare Karumanchi, Vineeth
2025-05-13 15:49     ` Sean Anderson
2025-05-15  6:14       ` Karumanchi, Vineeth
2025-05-13 16:40     ` Sean Anderson
2025-05-15  6:20       ` Karumanchi, Vineeth
2025-05-12 17:11 ` [net-next PATCH v4 00/11] Add PCS core support Daniel Golle
2025-05-12 17:15   ` Sean Anderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250512161013.731955-9-sean.anderson@linux.dev \
    --to=sean.anderson@linux.dev \
    --cc=andrew+netdev@lunn.ch \
    --cc=ansuelsmth@gmail.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=horms@kernel.org \
    --cc=kory.maincent@bootlin.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=michal.simek@amd.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=radhey.shyam.pandey@amd.com \
    --cc=robert.hancock@calian.com \
    --cc=suraj.gupta2@amd.com \
    --cc=upstream@airoha.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.