From: Cosmin Tanislav <demonsingur@gmail.com>
Cc: "Cosmin Tanislav" <cosmin.tanislav@analog.com>,
"Mauro Carvalho Chehab" <mchehab@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
"Julien Massot" <julien.massot@collabora.com>,
"Catalin Marinas" <catalin.marinas@arm.com>,
"Will Deacon" <will@kernel.org>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Liam Girdwood" <lgirdwood@gmail.com>,
"Mark Brown" <broonie@kernel.org>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Bartosz Golaszewski" <brgl@bgdev.pl>,
"Bjorn Andersson" <andersson@kernel.org>,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
"Dmitry Baryshkov" <dmitry.baryshkov@linaro.org>,
"Vignesh Raghavendra" <vigneshr@ti.com>,
"Nícolas F . R . A . Prado" <nfraprado@collabora.com>,
"Taniya Das" <quic_tdas@quicinc.com>,
"Liu Ying" <victor.liu@nxp.com>,
"Ross Burton" <ross.burton@arm.com>,
"Elinor Montmasson" <elinor.montmasson@savoirfairelinux.com>,
"Eric Biggers" <ebiggers@google.com>,
"Hans Verkuil" <hverkuil@xs4all.nl>,
"Sakari Ailus" <sakari.ailus@linux.intel.com>,
"AngeloGioacchino Del Regno"
<angelogioacchino.delregno@collabora.com>,
"Zhi Mao" <zhi.mao@mediatek.com>,
"Dongcheng Yan" <dongcheng.yan@intel.com>,
"Benjamin Mugnier" <benjamin.mugnier@foss.st.com>,
"Kieran Bingham" <kieran.bingham@ideasonboard.com>,
"Tommaso Merciai" <tomm.merciai@gmail.com>,
"Dan Carpenter" <dan.carpenter@linaro.org>,
"Ricardo Ribalda" <ribalda@chromium.org>,
"Laurentiu Palcu" <laurentiu.palcu@oss.nxp.com>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-staging@lists.linux.dev, linux-gpio@vger.kernel.org,
"Cosmin Tanislav" <demonsingur@gmail.com>
Subject: [PATCH v3 17/19] staging: media: remove MAX96712 driver
Date: Tue, 13 May 2025 00:28:26 +0300 [thread overview]
Message-ID: <20250512212832.3674722-18-demonsingur@gmail.com> (raw)
In-Reply-To: <20250512212832.3674722-1-demonsingur@gmail.com>
Remove the staging MAX96712 driver.
Its functionality has been moved to the MAX96724 driver which makes use
of the Maxim GMSL2/3 deserializer framework.
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
---
MAINTAINERS | 1 -
drivers/staging/media/Kconfig | 2 -
drivers/staging/media/Makefile | 1 -
drivers/staging/media/max96712/Kconfig | 14 -
drivers/staging/media/max96712/Makefile | 2 -
drivers/staging/media/max96712/max96712.c | 487 ----------------------
6 files changed, 507 deletions(-)
delete mode 100644 drivers/staging/media/max96712/Kconfig
delete mode 100644 drivers/staging/media/max96712/Makefile
delete mode 100644 drivers/staging/media/max96712/max96712.c
diff --git a/MAINTAINERS b/MAINTAINERS
index c94bab91688f..df8f8fb22d39 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14188,7 +14188,6 @@ M: Cosmin Tanislav <cosmin.tanislav@analog.com>
L: linux-media@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
-F: drivers/staging/media/max96712/max96712.c
MAX96714 GMSL2 DESERIALIZER DRIVER
M: Julien Massot <julien.massot@collabora.com>
diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
index b44214854399..fe29821f64a3 100644
--- a/drivers/staging/media/Kconfig
+++ b/drivers/staging/media/Kconfig
@@ -28,8 +28,6 @@ source "drivers/staging/media/imx/Kconfig"
source "drivers/staging/media/ipu3/Kconfig"
-source "drivers/staging/media/max96712/Kconfig"
-
source "drivers/staging/media/meson/vdec/Kconfig"
source "drivers/staging/media/rkvdec/Kconfig"
diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile
index ad4e9619a9e0..1a562b3b6881 100644
--- a/drivers/staging/media/Makefile
+++ b/drivers/staging/media/Makefile
@@ -2,7 +2,6 @@
obj-$(CONFIG_VIDEO_ATMEL_ISC_BASE) += deprecated/atmel/
obj-$(CONFIG_INTEL_ATOMISP) += atomisp/
obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx/
-obj-$(CONFIG_VIDEO_MAX96712) += max96712/
obj-$(CONFIG_VIDEO_MESON_VDEC) += meson/vdec/
obj-$(CONFIG_VIDEO_ROCKCHIP_VDEC) += rkvdec/
obj-$(CONFIG_VIDEO_STARFIVE_CAMSS) += starfive/
diff --git a/drivers/staging/media/max96712/Kconfig b/drivers/staging/media/max96712/Kconfig
deleted file mode 100644
index 117fadf81bd0..000000000000
--- a/drivers/staging/media/max96712/Kconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config VIDEO_MAX96712
- tristate "Maxim MAX96712 Quad GMSL2 Deserializer support"
- depends on I2C
- depends on OF_GPIO
- depends on VIDEO_DEV
- select V4L2_FWNODE
- select VIDEO_V4L2_SUBDEV_API
- select MEDIA_CONTROLLER
- help
- This driver supports the Maxim MAX96712 Quad GMSL2 Deserializer.
-
- To compile this driver as a module, choose M here: the
- module will be called max96712.
diff --git a/drivers/staging/media/max96712/Makefile b/drivers/staging/media/max96712/Makefile
deleted file mode 100644
index 70c1974ce3f0..000000000000
--- a/drivers/staging/media/max96712/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_VIDEO_MAX96712) += max96712.o
diff --git a/drivers/staging/media/max96712/max96712.c b/drivers/staging/media/max96712/max96712.c
deleted file mode 100644
index 0751b2e04895..000000000000
--- a/drivers/staging/media/max96712/max96712.c
+++ /dev/null
@@ -1,487 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Maxim MAX96712 Quad GMSL2 Deserializer Driver
- *
- * Copyright (C) 2021 Renesas Electronics Corporation
- * Copyright (C) 2021 Niklas Söderlund
- */
-
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/module.h>
-#include <linux/of_graph.h>
-#include <linux/regmap.h>
-
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-fwnode.h>
-#include <media/v4l2-subdev.h>
-
-#define DEBUG_EXTRA_REG 0x09
-#define DEBUG_EXTRA_PCLK_25MHZ 0x00
-#define DEBUG_EXTRA_PCLK_75MHZ 0x01
-
-enum max96712_pattern {
- MAX96712_PATTERN_CHECKERBOARD = 0,
- MAX96712_PATTERN_GRADIENT,
-};
-
-struct max96712_info {
- unsigned int dpllfreq;
- bool have_debug_extra;
-};
-
-struct max96712_priv {
- struct i2c_client *client;
- struct regmap *regmap;
- struct gpio_desc *gpiod_pwdn;
-
- const struct max96712_info *info;
-
- bool cphy;
- struct v4l2_mbus_config_mipi_csi2 mipi;
-
- struct v4l2_subdev sd;
- struct v4l2_ctrl_handler ctrl_handler;
- struct media_pad pads[1];
-
- enum max96712_pattern pattern;
-};
-
-static int max96712_write(struct max96712_priv *priv, unsigned int reg, u8 val)
-{
- int ret;
-
- ret = regmap_write(priv->regmap, reg, val);
- if (ret)
- dev_err(&priv->client->dev, "write 0x%04x failed\n", reg);
-
- return ret;
-}
-
-static int max96712_update_bits(struct max96712_priv *priv, unsigned int reg,
- u8 mask, u8 val)
-{
- int ret;
-
- ret = regmap_update_bits(priv->regmap, reg, mask, val);
- if (ret)
- dev_err(&priv->client->dev, "update 0x%04x failed\n", reg);
-
- return ret;
-}
-
-static int max96712_write_bulk(struct max96712_priv *priv, unsigned int reg,
- const void *val, size_t val_count)
-{
- int ret;
-
- ret = regmap_bulk_write(priv->regmap, reg, val, val_count);
- if (ret)
- dev_err(&priv->client->dev, "bulk write 0x%04x failed\n", reg);
-
- return ret;
-}
-
-static int max96712_write_bulk_value(struct max96712_priv *priv,
- unsigned int reg, unsigned int val,
- size_t val_count)
-{
- unsigned int i;
- u8 values[4];
-
- for (i = 1; i <= val_count; i++)
- values[i - 1] = (val >> ((val_count - i) * 8)) & 0xff;
-
- return max96712_write_bulk(priv, reg, &values, val_count);
-}
-
-static void max96712_reset(struct max96712_priv *priv)
-{
- max96712_update_bits(priv, 0x13, 0x40, 0x40);
- msleep(20);
-}
-
-static void max96712_mipi_enable(struct max96712_priv *priv, bool enable)
-{
- if (enable) {
- max96712_update_bits(priv, 0x40b, 0x02, 0x02);
- max96712_update_bits(priv, 0x8a0, 0x80, 0x80);
- } else {
- max96712_update_bits(priv, 0x8a0, 0x80, 0x00);
- max96712_update_bits(priv, 0x40b, 0x02, 0x00);
- }
-}
-
-static void max96712_mipi_configure(struct max96712_priv *priv)
-{
- unsigned int i;
- u8 phy5 = 0;
-
- max96712_mipi_enable(priv, false);
-
- /* Select 2x4 mode. */
- max96712_write(priv, 0x8a0, 0x04);
-
- /* TODO: Add support for 2-lane and 1-lane configurations. */
- if (priv->cphy) {
- /* Configure a 3-lane C-PHY using PHY0 and PHY1. */
- max96712_write(priv, 0x94a, 0xa0);
-
- /* Configure C-PHY timings. */
- max96712_write(priv, 0x8ad, 0x3f);
- max96712_write(priv, 0x8ae, 0x7d);
- } else {
- /* Configure a 4-lane D-PHY using PHY0 and PHY1. */
- max96712_write(priv, 0x94a, 0xc0);
- }
-
- /* Configure lane mapping for PHY0 and PHY1. */
- /* TODO: Add support for lane swapping. */
- max96712_write(priv, 0x8a3, 0xe4);
-
- /* Configure lane polarity for PHY0 and PHY1. */
- for (i = 0; i < priv->mipi.num_data_lanes + 1; i++)
- if (priv->mipi.lane_polarities[i])
- phy5 |= BIT(i == 0 ? 5 : i < 3 ? i - 1 : i);
- max96712_write(priv, 0x8a5, phy5);
-
- /* Set link frequency for PHY0 and PHY1. */
- max96712_update_bits(priv, 0x415, 0x3f,
- ((priv->info->dpllfreq / 100) & 0x1f) | BIT(5));
- max96712_update_bits(priv, 0x418, 0x3f,
- ((priv->info->dpllfreq / 100) & 0x1f) | BIT(5));
-
- /* Enable PHY0 and PHY1 */
- max96712_update_bits(priv, 0x8a2, 0xf0, 0x30);
-}
-
-static void max96712_pattern_enable(struct max96712_priv *priv, bool enable)
-{
- const u32 h_active = 1920;
- const u32 h_fp = 88;
- const u32 h_sw = 44;
- const u32 h_bp = 148;
- const u32 h_tot = h_active + h_fp + h_sw + h_bp;
-
- const u32 v_active = 1080;
- const u32 v_fp = 4;
- const u32 v_sw = 5;
- const u32 v_bp = 36;
- const u32 v_tot = v_active + v_fp + v_sw + v_bp;
-
- if (!enable) {
- max96712_write(priv, 0x1051, 0x00);
- return;
- }
-
- /* Set PCLK to 75MHz if device have DEBUG_EXTRA register. */
- if (priv->info->have_debug_extra)
- max96712_write(priv, DEBUG_EXTRA_REG, DEBUG_EXTRA_PCLK_75MHZ);
-
- /* Configure Video Timing Generator for 1920x1080 @ 30 fps. */
- max96712_write_bulk_value(priv, 0x1052, 0, 3);
- max96712_write_bulk_value(priv, 0x1055, v_sw * h_tot, 3);
- max96712_write_bulk_value(priv, 0x1058,
- (v_active + v_fp + + v_bp) * h_tot, 3);
- max96712_write_bulk_value(priv, 0x105b, 0, 3);
- max96712_write_bulk_value(priv, 0x105e, h_sw, 2);
- max96712_write_bulk_value(priv, 0x1060, h_active + h_fp + h_bp, 2);
- max96712_write_bulk_value(priv, 0x1062, v_tot, 2);
- max96712_write_bulk_value(priv, 0x1064,
- h_tot * (v_sw + v_bp) + (h_sw + h_bp), 3);
- max96712_write_bulk_value(priv, 0x1067, h_active, 2);
- max96712_write_bulk_value(priv, 0x1069, h_fp + h_sw + h_bp, 2);
- max96712_write_bulk_value(priv, 0x106b, v_active, 2);
-
- /* Generate VS, HS and DE in free-running mode. */
- max96712_write(priv, 0x1050, 0xfb);
-
- /* Configure Video Pattern Generator. */
- if (priv->pattern == MAX96712_PATTERN_CHECKERBOARD) {
- /* Set checkerboard pattern size. */
- max96712_write(priv, 0x1074, 0x3c);
- max96712_write(priv, 0x1075, 0x3c);
- max96712_write(priv, 0x1076, 0x3c);
-
- /* Set checkerboard pattern colors. */
- max96712_write_bulk_value(priv, 0x106e, 0xfecc00, 3);
- max96712_write_bulk_value(priv, 0x1071, 0x006aa7, 3);
-
- /* Generate checkerboard pattern. */
- max96712_write(priv, 0x1051, 0x10);
- } else {
- /* Set gradient increment. */
- max96712_write(priv, 0x106d, 0x10);
-
- /* Generate gradient pattern. */
- max96712_write(priv, 0x1051, 0x20);
- }
-}
-
-static int max96712_s_stream(struct v4l2_subdev *sd, int enable)
-{
- struct max96712_priv *priv = v4l2_get_subdevdata(sd);
-
- if (enable) {
- max96712_pattern_enable(priv, true);
- max96712_mipi_enable(priv, true);
- } else {
- max96712_mipi_enable(priv, false);
- max96712_pattern_enable(priv, false);
- }
-
- return 0;
-}
-
-static const struct v4l2_subdev_video_ops max96712_video_ops = {
- .s_stream = max96712_s_stream,
-};
-
-static int max96712_init_state(struct v4l2_subdev *sd,
- struct v4l2_subdev_state *state)
-{
- static const struct v4l2_mbus_framefmt default_fmt = {
- .width = 1920,
- .height = 1080,
- .code = MEDIA_BUS_FMT_RGB888_1X24,
- .colorspace = V4L2_COLORSPACE_SRGB,
- .field = V4L2_FIELD_NONE,
- .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT,
- .quantization = V4L2_QUANTIZATION_DEFAULT,
- .xfer_func = V4L2_XFER_FUNC_DEFAULT,
- };
- struct v4l2_mbus_framefmt *fmt;
-
- fmt = v4l2_subdev_state_get_format(state, 0);
- *fmt = default_fmt;
-
- return 0;
-}
-
-static const struct v4l2_subdev_internal_ops max96712_internal_ops = {
- .init_state = max96712_init_state,
-};
-
-static const struct v4l2_subdev_pad_ops max96712_pad_ops = {
- .get_fmt = v4l2_subdev_get_fmt,
- .set_fmt = v4l2_subdev_get_fmt,
-};
-
-static const struct v4l2_subdev_ops max96712_subdev_ops = {
- .video = &max96712_video_ops,
- .pad = &max96712_pad_ops,
-};
-
-static const char * const max96712_test_pattern[] = {
- "Checkerboard",
- "Gradient",
-};
-
-static int max96712_s_ctrl(struct v4l2_ctrl *ctrl)
-{
- struct max96712_priv *priv =
- container_of(ctrl->handler, struct max96712_priv, ctrl_handler);
-
- switch (ctrl->id) {
- case V4L2_CID_TEST_PATTERN:
- priv->pattern = ctrl->val ?
- MAX96712_PATTERN_GRADIENT :
- MAX96712_PATTERN_CHECKERBOARD;
- break;
- }
- return 0;
-}
-
-static const struct v4l2_ctrl_ops max96712_ctrl_ops = {
- .s_ctrl = max96712_s_ctrl,
-};
-
-static int max96712_v4l2_register(struct max96712_priv *priv)
-{
- long pixel_rate;
- int ret;
-
- priv->sd.internal_ops = &max96712_internal_ops;
- v4l2_i2c_subdev_init(&priv->sd, priv->client, &max96712_subdev_ops);
- priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
- priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
-
- v4l2_ctrl_handler_init(&priv->ctrl_handler, 2);
-
- /*
- * TODO: Once V4L2_CID_LINK_FREQ is changed from a menu control to an
- * INT64 control it should be used here instead of V4L2_CID_PIXEL_RATE.
- */
- pixel_rate = priv->info->dpllfreq / priv->mipi.num_data_lanes * 1000000;
- v4l2_ctrl_new_std(&priv->ctrl_handler, NULL, V4L2_CID_PIXEL_RATE,
- pixel_rate, pixel_rate, 1, pixel_rate);
-
- v4l2_ctrl_new_std_menu_items(&priv->ctrl_handler, &max96712_ctrl_ops,
- V4L2_CID_TEST_PATTERN,
- ARRAY_SIZE(max96712_test_pattern) - 1,
- 0, 0, max96712_test_pattern);
-
- priv->sd.ctrl_handler = &priv->ctrl_handler;
- ret = priv->ctrl_handler.error;
- if (ret)
- goto error;
-
- priv->pads[0].flags = MEDIA_PAD_FL_SOURCE;
- ret = media_entity_pads_init(&priv->sd.entity, 1, priv->pads);
- if (ret)
- goto error;
-
- v4l2_set_subdevdata(&priv->sd, priv);
-
- priv->sd.state_lock = priv->ctrl_handler.lock;
- ret = v4l2_subdev_init_finalize(&priv->sd);
- if (ret)
- goto error;
-
- ret = v4l2_async_register_subdev(&priv->sd);
- if (ret < 0) {
- dev_err(&priv->client->dev, "Unable to register subdevice\n");
- goto error;
- }
-
- return 0;
-error:
- v4l2_ctrl_handler_free(&priv->ctrl_handler);
-
- return ret;
-}
-
-static int max96712_parse_dt(struct max96712_priv *priv)
-{
- struct fwnode_handle *ep;
- struct v4l2_fwnode_endpoint v4l2_ep = {
- .bus_type = V4L2_MBUS_UNKNOWN,
- };
- unsigned int supported_lanes;
- int ret;
-
- ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(&priv->client->dev), 4,
- 0, 0);
- if (!ep) {
- dev_err(&priv->client->dev, "Not connected to subdevice\n");
- return -EINVAL;
- }
-
- ret = v4l2_fwnode_endpoint_parse(ep, &v4l2_ep);
- fwnode_handle_put(ep);
- if (ret) {
- dev_err(&priv->client->dev, "Could not parse v4l2 endpoint\n");
- return -EINVAL;
- }
-
- switch (v4l2_ep.bus_type) {
- case V4L2_MBUS_CSI2_DPHY:
- supported_lanes = 4;
- priv->cphy = false;
- break;
- case V4L2_MBUS_CSI2_CPHY:
- supported_lanes = 3;
- priv->cphy = true;
- break;
- default:
- dev_err(&priv->client->dev, "Unsupported bus-type %u\n",
- v4l2_ep.bus_type);
- return -EINVAL;
- }
-
- if (v4l2_ep.bus.mipi_csi2.num_data_lanes != supported_lanes) {
- dev_err(&priv->client->dev, "Only %u data lanes supported\n",
- supported_lanes);
- return -EINVAL;
- }
-
- priv->mipi = v4l2_ep.bus.mipi_csi2;
-
- return 0;
-}
-
-static const struct regmap_config max96712_i2c_regmap = {
- .reg_bits = 16,
- .val_bits = 8,
- .max_register = 0x1f00,
-};
-
-static int max96712_probe(struct i2c_client *client)
-{
- struct max96712_priv *priv;
- int ret;
-
- priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- priv->info = of_device_get_match_data(&client->dev);
-
- priv->client = client;
-
- priv->regmap = devm_regmap_init_i2c(client, &max96712_i2c_regmap);
- if (IS_ERR(priv->regmap))
- return PTR_ERR(priv->regmap);
-
- priv->gpiod_pwdn = devm_gpiod_get_optional(&client->dev, "enable",
- GPIOD_OUT_HIGH);
- if (IS_ERR(priv->gpiod_pwdn))
- return PTR_ERR(priv->gpiod_pwdn);
-
- gpiod_set_consumer_name(priv->gpiod_pwdn, "max96712-pwdn");
- gpiod_set_value_cansleep(priv->gpiod_pwdn, 1);
-
- if (priv->gpiod_pwdn)
- usleep_range(4000, 5000);
-
- max96712_reset(priv);
-
- ret = max96712_parse_dt(priv);
- if (ret)
- return ret;
-
- max96712_mipi_configure(priv);
-
- return max96712_v4l2_register(priv);
-}
-
-static void max96712_remove(struct i2c_client *client)
-{
- struct v4l2_subdev *sd = i2c_get_clientdata(client);
- struct max96712_priv *priv = container_of(sd, struct max96712_priv, sd);
-
- v4l2_async_unregister_subdev(&priv->sd);
-
- gpiod_set_value_cansleep(priv->gpiod_pwdn, 0);
-}
-
-static const struct max96712_info max96712_info_max96712 = {
- .dpllfreq = 1000,
- .have_debug_extra = true,
-};
-
-static const struct max96712_info max96712_info_max96724 = {
- .dpllfreq = 1200,
-};
-
-static const struct of_device_id max96712_of_table[] = {
- { .compatible = "maxim,max96712", .data = &max96712_info_max96712 },
- { .compatible = "maxim,max96724", .data = &max96712_info_max96724 },
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, max96712_of_table);
-
-static struct i2c_driver max96712_i2c_driver = {
- .driver = {
- .name = "max96712",
- .of_match_table = of_match_ptr(max96712_of_table),
- },
- .probe = max96712_probe,
- .remove = max96712_remove,
-};
-
-module_i2c_driver(max96712_i2c_driver);
-
-MODULE_DESCRIPTION("Maxim MAX96712 Quad GMSL2 Deserializer Driver");
-MODULE_AUTHOR("Niklas Söderlund <niklas.soderlund@ragnatech.se>");
-MODULE_LICENSE("GPL");
--
2.49.0
next prev parent reply other threads:[~2025-05-12 22:08 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-12 21:28 [PATCH v3 00/19] media: i2c: add Maxim GMSL2/3 serializer and deserializer drivers Cosmin Tanislav
2025-05-12 21:28 ` [PATCH v3 01/19] dt-bindings: media: i2c: max96717: add myself as maintainer Cosmin Tanislav
2025-05-14 21:56 ` Rob Herring (Arm)
2025-05-12 21:28 ` [PATCH v3 02/19] dt-bindings: media: i2c: max96717: add support for I2C ATR Cosmin Tanislav
2025-05-14 21:58 ` Rob Herring (Arm)
2025-05-12 21:28 ` [PATCH v3 03/19] dt-bindings: media: i2c: max96717: add support for pinctrl/pinconf Cosmin Tanislav
2025-05-14 22:01 ` Rob Herring
2025-05-12 21:28 ` [PATCH v3 04/19] dt-bindings: media: i2c: max96717: add support for MAX9295A Cosmin Tanislav
2025-05-14 22:02 ` Rob Herring (Arm)
2025-05-12 21:28 ` [PATCH v3 05/19] dt-bindings: media: i2c: max96717: add support for MAX96793 Cosmin Tanislav
2025-05-14 22:03 ` Rob Herring (Arm)
2025-05-12 21:28 ` [PATCH v3 06/19] dt-bindings: media: i2c: max96712: add myself as maintainer Cosmin Tanislav
2025-05-14 22:03 ` Rob Herring (Arm)
2025-05-12 21:28 ` [PATCH v3 07/19] dt-bindings: media: i2c: max96712: use pattern properties for ports Cosmin Tanislav
2025-05-14 22:04 ` Rob Herring (Arm)
2025-05-12 21:28 ` [PATCH v3 08/19] dt-bindings: media: i2c: max96712: add support for I2C ATR Cosmin Tanislav
2025-05-14 22:04 ` Rob Herring (Arm)
2025-05-12 21:28 ` [PATCH v3 09/19] dt-bindings: media: i2c: max96712: add support for POC supplies Cosmin Tanislav
2025-05-14 22:05 ` Rob Herring (Arm)
2025-05-12 21:28 ` [PATCH v3 10/19] dt-bindings: media: i2c: max96712: deprecate enable-gpios Cosmin Tanislav
2025-05-14 22:10 ` Rob Herring
2025-05-12 21:28 ` [PATCH v3 11/19] dt-bindings: media: i2c: max96712: add support for MAX96724F/R Cosmin Tanislav
2025-05-14 22:10 ` Rob Herring (Arm)
2025-05-12 21:28 ` [PATCH v3 12/19] dt-bindings: media: i2c: max96714: add myself as maintainer Cosmin Tanislav
2025-05-14 22:10 ` Rob Herring (Arm)
2025-05-12 21:28 ` [PATCH v3 13/19] dt-bindings: media: i2c: max96714: add support for MAX96714R Cosmin Tanislav
2025-05-14 22:11 ` Rob Herring (Arm)
2025-05-12 21:28 ` [PATCH v3 14/19] dt-bindings: media: i2c: add MAX9296A, MAX96716A, MAX96792A Cosmin Tanislav
2025-05-12 23:25 ` Rob Herring (Arm)
2025-05-12 21:28 ` [PATCH v3 15/19] media: i2c: add Maxim GMSL2/3 serializer and deserializer drivers Cosmin Tanislav
2025-05-19 20:08 ` Jakub Kostiw
2025-05-12 21:28 ` [PATCH v3 16/19] arm64: defconfig: disable deprecated MAX96712 driver Cosmin Tanislav
2025-05-12 21:28 ` Cosmin Tanislav [this message]
2025-05-12 21:28 ` [PATCH v3 18/19] media: i2c: remove MAX96717 driver Cosmin Tanislav
2025-05-12 21:28 ` [PATCH v3 19/19] media: i2c: remove MAX96714 driver Cosmin Tanislav
2025-05-12 21:57 ` [PATCH v3 00/19] media: i2c: add Maxim GMSL2/3 serializer and deserializer drivers Niklas Söderlund
2025-05-19 19:40 ` Jakub Kostiw
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250512212832.3674722-18-demonsingur@gmail.com \
--to=demonsingur@gmail.com \
--cc=andersson@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=benjamin.mugnier@foss.st.com \
--cc=brgl@bgdev.pl \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=cosmin.tanislav@analog.com \
--cc=dan.carpenter@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=dongcheng.yan@intel.com \
--cc=ebiggers@google.com \
--cc=elinor.montmasson@savoirfairelinux.com \
--cc=geert+renesas@glider.be \
--cc=gregkh@linuxfoundation.org \
--cc=hverkuil@xs4all.nl \
--cc=julien.massot@collabora.com \
--cc=kieran.bingham@ideasonboard.com \
--cc=krzk+dt@kernel.org \
--cc=laurentiu.palcu@oss.nxp.com \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=mchehab@kernel.org \
--cc=nfraprado@collabora.com \
--cc=niklas.soderlund@ragnatech.se \
--cc=quic_tdas@quicinc.com \
--cc=ribalda@chromium.org \
--cc=robh@kernel.org \
--cc=ross.burton@arm.com \
--cc=sakari.ailus@linux.intel.com \
--cc=tomm.merciai@gmail.com \
--cc=victor.liu@nxp.com \
--cc=vigneshr@ti.com \
--cc=will@kernel.org \
--cc=zhi.mao@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.