From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,yunjeong.mun@sk.com,corbet@lwn.net,sj@kernel.org,akpm@linux-foundation.org
Subject: [merged mm-stable] samples-damon-implement-a-damon-module-for-memory-tiering.patch removed from -mm tree
Date: Mon, 12 May 2025 23:53:27 -0700 [thread overview]
Message-ID: <20250513065327.AF284C4CEE4@smtp.kernel.org> (raw)
The quilt patch titled
Subject: samples/damon: implement a DAMON module for memory tiering
has been removed from the -mm tree. Its filename was
samples-damon-implement-a-damon-module-for-memory-tiering.patch
This patch was dropped because it was merged into the mm-stable branch
of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
------------------------------------------------------
From: SeongJae Park <sj@kernel.org>
Subject: samples/damon: implement a DAMON module for memory tiering
Date: Sun, 20 Apr 2025 12:40:30 -0700
Implement a sample DAMON module that shows how self-tuned DAMON-based
memory tiering can be written. It is a sample since the purpose is to
give an idea about how it can be implemented and perform, rather than be
used on general production setups. Especially, it supports only two tiers
memory setup having only one CPU-attached NUMA node.
[sj@kernel.org: fix wrong DAMON attrs setting]
Link: https://lkml.kernel.org/r/20250510220932.47722-1-sj@kernel.org
[sj@kernel.org: trigger build even if only mtier is enabled]
Link: https://lkml.kernel.org/r/20250426184054.11437-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20250420194030.75838-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Yunjeong Mun <yunjeong.mun@sk.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
samples/Makefile | 1
samples/damon/Kconfig | 13 ++
samples/damon/Makefile | 1
samples/damon/mtier.c | 178 +++++++++++++++++++++++++++++++++++++++
4 files changed, 193 insertions(+)
--- a/samples/damon/Kconfig~samples-damon-implement-a-damon-module-for-memory-tiering
+++ a/samples/damon/Kconfig
@@ -27,4 +27,17 @@ config SAMPLE_DAMON_PRCL
If unsure, say N.
+config SAMPLE_DAMON_MTIER
+ bool "DAMON sample module for memory tiering"
+ depends on DAMON && DAMON_PADDR
+ help
+ Thps builds DAMON sample module for memory tierign.
+
+ The module assumes the system is constructed with two NUMA nodes,
+ which seems as local and remote nodes to all CPUs. For example,
+ node0 is for DDR5 DRAMs connected via DIMM, while node1 is for DDR4
+ DRAMs connected via CXL.
+
+ If unsure, say N.
+
endmenu
--- a/samples/damon/Makefile~samples-damon-implement-a-damon-module-for-memory-tiering
+++ a/samples/damon/Makefile
@@ -2,3 +2,4 @@
obj-$(CONFIG_SAMPLE_DAMON_WSSE) += wsse.o
obj-$(CONFIG_SAMPLE_DAMON_PRCL) += prcl.o
+obj-$(CONFIG_SAMPLE_DAMON_MTIER) += mtier.o
diff --git a/samples/damon/mtier.c a/samples/damon/mtier.c
new file mode 100644
--- /dev/null
+++ a/samples/damon/mtier.c
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * memory tiering: migrate cold pages in node 0 and hot pages in node 1 to node
+ * 1 and node 0, respectively. Adjust the hotness/coldness threshold aiming
+ * resulting 99.6 % node 0 utilization ratio.
+ */
+
+#define pr_fmt(fmt) "damon_sample_mtier: " fmt
+
+#include <linux/damon.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+static unsigned long node0_start_addr __read_mostly;
+module_param(node0_start_addr, ulong, 0600);
+
+static unsigned long node0_end_addr __read_mostly;
+module_param(node0_end_addr, ulong, 0600);
+
+static unsigned long node1_start_addr __read_mostly;
+module_param(node1_start_addr, ulong, 0600);
+
+static unsigned long node1_end_addr __read_mostly;
+module_param(node1_end_addr, ulong, 0600);
+
+static int damon_sample_mtier_enable_store(
+ const char *val, const struct kernel_param *kp);
+
+static const struct kernel_param_ops enable_param_ops = {
+ .set = damon_sample_mtier_enable_store,
+ .get = param_get_bool,
+};
+
+static bool enable __read_mostly;
+module_param_cb(enable, &enable_param_ops, &enable, 0600);
+MODULE_PARM_DESC(enable, "Enable of disable DAMON_SAMPLE_MTIER");
+
+static struct damon_ctx *ctxs[2];
+
+static struct damon_ctx *damon_sample_mtier_build_ctx(bool promote)
+{
+ struct damon_ctx *ctx;
+ struct damon_attrs attrs;
+ struct damon_target *target;
+ struct damon_region *region;
+ struct damos *scheme;
+ struct damos_quota_goal *quota_goal;
+ struct damos_filter *filter;
+
+ ctx = damon_new_ctx();
+ if (!ctx)
+ return NULL;
+ attrs = (struct damon_attrs) {
+ .sample_interval = 5 * USEC_PER_MSEC,
+ .aggr_interval = 100 * USEC_PER_MSEC,
+ .ops_update_interval = 60 * USEC_PER_MSEC * MSEC_PER_SEC,
+ .min_nr_regions = 10,
+ .max_nr_regions = 1000,
+ };
+
+ /*
+ * auto-tune sampling and aggregation interval aiming 4% DAMON-observed
+ * accesses ratio, keeping sampling interval in [5ms, 10s] range.
+ */
+ attrs.intervals_goal = (struct damon_intervals_goal) {
+ .access_bp = 400, .aggrs = 3,
+ .min_sample_us = 5000, .max_sample_us = 10000000,
+ };
+ if (damon_set_attrs(ctx, &attrs))
+ goto free_out;
+ if (damon_select_ops(ctx, DAMON_OPS_PADDR))
+ goto free_out;
+
+ target = damon_new_target();
+ if (!target)
+ goto free_out;
+ damon_add_target(ctx, target);
+ region = damon_new_region(
+ promote ? node1_start_addr : node0_start_addr,
+ promote ? node1_end_addr : node0_end_addr);
+ if (!region)
+ goto free_out;
+ damon_add_region(region, target);
+
+ scheme = damon_new_scheme(
+ /* access pattern */
+ &(struct damos_access_pattern) {
+ .min_sz_region = PAGE_SIZE,
+ .max_sz_region = ULONG_MAX,
+ .min_nr_accesses = promote ? 1 : 0,
+ .max_nr_accesses = promote ? UINT_MAX : 0,
+ .min_age_region = 0,
+ .max_age_region = UINT_MAX},
+ /* action */
+ promote ? DAMOS_MIGRATE_HOT : DAMOS_MIGRATE_COLD,
+ 1000000, /* apply interval (1s) */
+ &(struct damos_quota){
+ /* 200 MiB per sec by most */
+ .reset_interval = 1000,
+ .sz = 200 * 1024 * 1024,
+ /* ignore size of region when prioritizing */
+ .weight_sz = 0,
+ .weight_nr_accesses = 100,
+ .weight_age = 100,
+ },
+ &(struct damos_watermarks){},
+ promote ? 0 : 1); /* migrate target node id */
+ if (!scheme)
+ goto free_out;
+ damon_set_schemes(ctx, &scheme, 1);
+ quota_goal = damos_new_quota_goal(
+ promote ? DAMOS_QUOTA_NODE_MEM_USED_BP :
+ DAMOS_QUOTA_NODE_MEM_FREE_BP,
+ promote ? 9970 : 50);
+ if (!quota_goal)
+ goto free_out;
+ quota_goal->nid = 0;
+ damos_add_quota_goal(&scheme->quota, quota_goal);
+ filter = damos_new_filter(DAMOS_FILTER_TYPE_YOUNG, true, promote);
+ if (!filter)
+ goto free_out;
+ damos_add_filter(scheme, filter);
+ return ctx;
+free_out:
+ damon_destroy_ctx(ctx);
+ return NULL;
+}
+
+static int damon_sample_mtier_start(void)
+{
+ struct damon_ctx *ctx;
+
+ ctx = damon_sample_mtier_build_ctx(true);
+ if (!ctx)
+ return -ENOMEM;
+ ctxs[0] = ctx;
+ ctx = damon_sample_mtier_build_ctx(false);
+ if (!ctx) {
+ damon_destroy_ctx(ctxs[0]);
+ return -ENOMEM;
+ }
+ ctxs[1] = ctx;
+ return damon_start(ctxs, 2, true);
+}
+
+static void damon_sample_mtier_stop(void)
+{
+ damon_stop(ctxs, 2);
+ damon_destroy_ctx(ctxs[0]);
+ damon_destroy_ctx(ctxs[1]);
+}
+
+static int damon_sample_mtier_enable_store(
+ const char *val, const struct kernel_param *kp)
+{
+ bool enabled = enable;
+ int err;
+
+ err = kstrtobool(val, &enable);
+ if (err)
+ return err;
+
+ if (enable == enabled)
+ return 0;
+
+ if (enable)
+ return damon_sample_mtier_start();
+ damon_sample_mtier_stop();
+ return 0;
+}
+
+static int __init damon_sample_mtier_init(void)
+{
+ return 0;
+}
+
+module_init(damon_sample_mtier_init);
--- a/samples/Makefile~samples-damon-implement-a-damon-module-for-memory-tiering
+++ a/samples/Makefile
@@ -42,4 +42,5 @@ obj-$(CONFIG_SAMPLE_FPROBE) += fprobe/
obj-$(CONFIG_SAMPLES_RUST) += rust/
obj-$(CONFIG_SAMPLE_DAMON_WSSE) += damon/
obj-$(CONFIG_SAMPLE_DAMON_PRCL) += damon/
+obj-$(CONFIG_SAMPLE_DAMON_MTIER) += damon/
obj-$(CONFIG_SAMPLE_HUNG_TASK) += hung_task/
_
Patches currently in -mm which might be from sj@kernel.org are
mm-damon-core-warn-and-fix-nr_accesses-corruption.patch
mm-damon-sysfs-schemes-fix-wrong-comment-on-damons_sysfs_quota_goal_metric_strs.patch
mm-damon-paddr-remove-unused-variable-folio_list-in-damon_pa_stat.patch
mm-damon-tests-core-kunit-add-a-test-for-damos_set_filters_default_reject.patch
selftests-damon-_damon_sysfs-read-tried-regions-directories-in-order.patch
docs-damon-update-titles-and-brief-introductions-to-explain-damos.patch
reply other threads:[~2025-05-13 6:53 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250513065327.AF284C4CEE4@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=corbet@lwn.net \
--cc=mm-commits@vger.kernel.org \
--cc=sj@kernel.org \
--cc=yunjeong.mun@sk.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.