[PATCH v2 12/12] docs: iio: add ADXL313 accelerometer

[Lothar Rubusch <l.rubusch@gmail.com>]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=y, Size: 9652 bytes --]

Add documentation for the ADXL313 accelerometer driver.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
 Documentation/iio/adxl313.rst | 196 ++++++++++++++++++++++++++++++++++
 Documentation/iio/index.rst   |   1 +
 2 files changed, 197 insertions(+)
 create mode 100644 Documentation/iio/adxl313.rst

diff --git a/Documentation/iio/adxl313.rst b/Documentation/iio/adxl313.rst
new file mode 100644
index 000000000000..8c4e2d141594
--- /dev/null
+++ b/Documentation/iio/adxl313.rst
@@ -0,0 +1,196 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+ADXL313 driver
+===============
+
+This driver supports Analog Device's ADXL313 on SPI/I2C bus.
+
+1. Supported devices
+====================
+
+* `ADXL313 <https://www.analog.com/ADXL313>`_
+
+The ADXL313is a low noise density, low power, 3-axis accelerometer with
+selectable measurement ranges. The ADXL313 supports the ±0.5 g, ±1 g, ±2 g and
+±4 g ranges.
+
+2. Device attributes
+====================
+
+Accelerometer measurements are always provided.
+
+Temperature data are also provided. This data can be used to monitor the
+internal system temperature or to improve the temperature stability of the
+device via calibration.
+
+Each IIO device, has a device folder under ``/sys/bus/iio/devices/iio:deviceX``,
+where X is the IIO index of the device. Under these folders reside a set of
+device files, depending on the characteristics and features of the hardware
+device in questions. These files are consistently generalized and documented in
+the IIO ABI documentation.
+
+The following tables show the adxl313 related device files, found in the
+specific device folder path ``/sys/bus/iio/devices/iio:deviceX``.
+
++---------------------------------------------------+----------------------------------------------------------+
+| 3-Axis Accelerometer related device files         | Description                                              |
++---------------------------------------------------+----------------------------------------------------------+
+| in_accel_scale                                    | Scale for the accelerometer channels.                    |
++---------------------------------------------------+----------------------------------------------------------+
+| in_accel_x_calibbias                              | Calibration offset for the X-axis accelerometer channel. |
++---------------------------------------------------+----------------------------------------------------------+
+| in_accel_x_raw                                    | Raw X-axis accelerometer channel value.                  |
++---------------------------------------------------+----------------------------------------------------------+
+| in_accel_y_calibbias                              | y-axis acceleration offset correction                    |
++---------------------------------------------------+----------------------------------------------------------+
+| in_accel_y_raw                                    | Raw Y-axis accelerometer channel value.                  |
++---------------------------------------------------+----------------------------------------------------------+
+| in_accel_z_calibbias                              | Calibration offset for the Z-axis accelerometer channel. |
++---------------------------------------------------+----------------------------------------------------------+
+| in_accel_z_raw                                    | Raw Z-axis accelerometer channel value.                  |
++---------------------------------------------------+----------------------------------------------------------+
+
++---------------------------------------+----------------------------------------------+
+| Miscellaneous device files            | Description                                  |
++---------------------------------------+----------------------------------------------+
+| name                                  | Name of the IIO device.                      |
++---------------------------------------+----------------------------------------------+
+| in_accel_sampling_frequency           | Currently selected sample rate.              |
++---------------------------------------+----------------------------------------------+
+| in_accel_sampling_frequency_available | Available sampling frequency configurations. |
++---------------------------------------+----------------------------------------------+
+
+Channels processed values
+-------------------------
+
+A channel value can be read from its _raw attribute. The value returned is the
+raw value as reported by the devices. To get the processed value of the channel,
+apply the following formula:
+
+.. code-block:: bash
+
+        processed value = (_raw + _offset) * _scale
+
+Where _offset and _scale are device attributes. If no _offset attribute is
+present, simply assume its value is 0.
+
+The ADXL313 driver offers data for a single types of channels, the table below
+shows the measurement units for the processed value, which are defined by the
+IIO framework:
+
++-------------------------------------+---------------------------+
+| Channel type                        | Measurement unit          |
++-------------------------------------+---------------------------+
+| Acceleration on X, Y, and Z axis    | Meters per Second squared |
++-------------------------------------+---------------------------+
+
+Usage examples
+--------------
+
+Show device name:
+
+.. code-block:: bash
+
+        root:/sys/bus/iio/devices/iio:device0> cat name
+        adxl313
+
+Show accelerometer channels value:
+
+.. code-block:: bash
+
+        root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_raw
+        2
+        root:/sys/bus/iio/devices/iio:device0> cat in_accel_y_raw
+        -57
+        root:/sys/bus/iio/devices/iio:device0> cat in_accel_z_raw
+        2
+        root:/sys/bus/iio/devices/iio:device0> cat in_accel_scale
+        0.009576806
+
+- X-axis acceleration = in_accel_x_raw * in_accel_scale = 0.0191536 m/s^2
+- Y-axis acceleration = in_accel_y_raw * in_accel_scale = -0.5458779 m/s^2
+- Z-axis acceleration = in_accel_z_raw * in_accel_scale = 0.0191536 m/s^2
+
+Set calibration offset for accelerometer channels. Note, the calibration will be
+rounded according to the graduation of LSB units:
+
+.. code-block:: bash
+
+        root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_calibbias
+        0
+
+        root:/sys/bus/iio/devices/iio:device0> echo 50 > in_accel_x_calibbias
+        root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_calibbias
+        48
+
+Set sampling frequency:
+
+.. code-block:: bash
+
+        root:/sys/bus/iio/devices/iio:device0> cat in_accel_sampling_frequency
+        100.000000
+        root:/sys/bus/iio/devices/iio:device0> cat in_accel_sampling_frequency_available
+        6.250000 12.500000 25.000000 50.000000 100.000000 200.000000 400.000000 800.000000 1600.000000 3200.000000
+
+        root:/sys/bus/iio/devices/iio:device0> echo 400 > in_accel_sampling_frequency
+        root:/sys/bus/iio/devices/iio:device0> cat in_accel_sampling_frequency
+        400.000000
+
+3. Device buffers
+=================
+
+This driver supports IIO buffers.
+
+All devices support retrieving the raw acceleration measurements using buffers.
+
+Usage examples
+--------------
+
+Select channels for buffer read:
+
+.. code-block:: bash
+
+        root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_accel_x_en
+        root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_accel_y_en
+        root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_accel_z_en
+
+Set the number of samples to be stored in the buffer:
+
+.. code-block:: bash
+
+        root:/sys/bus/iio/devices/iio:device0> echo 10 > buffer/length
+
+Enable buffer readings:
+
+.. code-block:: bash
+
+        root:/sys/bus/iio/devices/iio:device0> echo 1 > buffer/enable
+
+Obtain buffered data:
+
+.. code-block:: bash
+
+        root:/sys/bus/iio/devices/iio:device0> hexdump -C /dev/iio\:device0
+        ...
+        000000d0  01 fc 31 00 c7 ff 03 fc  31 00 c7 ff 04 fc 33 00  |..1.....1.....3.|
+        000000e0  c8 ff 03 fc 32 00 c5 ff  ff fc 32 00 c7 ff 0a fc  |....2.....2.....|
+        000000f0  30 00 c8 ff 06 fc 33 00  c7 ff 01 fc 2f 00 c8 ff  |0.....3...../...|
+        00000100  02 fc 32 00 c6 ff 04 fc  33 00 c8 ff 05 fc 33 00  |..2.....3.....3.|
+        00000110  ca ff 02 fc 31 00 c7 ff  02 fc 30 00 c9 ff 09 fc  |....1.....0.....|
+        00000120  35 00 c9 ff 08 fc 35 00  c8 ff 02 fc 31 00 c5 ff  |5.....5.....1...|
+        00000130  03 fc 32 00 c7 ff 04 fc  32 00 c7 ff 02 fc 31 00  |..2.....2.....1.|
+        00000140  c7 ff 08 fc 30 00 c7 ff  02 fc 32 00 c5 ff ff fc  |....0.....2.....|
+        00000150  31 00 c5 ff 04 fc 31 00  c8 ff 03 fc 32 00 c8 ff  |1.....1.....2...|
+        00000160  01 fc 31 00 c7 ff 05 fc  31 00 c3 ff 04 fc 31 00  |..1.....1.....1.|
+        00000170  c5 ff 04 fc 30 00 c7 ff  03 fc 31 00 c9 ff 03 fc  |....0.....1.....|
+        ...
+
+See ``Documentation/iio/iio_devbuf.rst`` for more information about how buffered
+data is structured.
+
+4. IIO Interfacing Tools
+========================
+
+See ``Documentation/iio/iio_tools.rst`` for the description of the available IIO
+interfacing tools.
diff --git a/Documentation/iio/index.rst b/Documentation/iio/index.rst
index 2d6afc5a8ed5..c106402a91f7 100644
--- a/Documentation/iio/index.rst
+++ b/Documentation/iio/index.rst
@@ -31,6 +31,7 @@ Industrial I/O Kernel Drivers
    adis16475
    adis16480
    adis16550
+   adxl313
    adxl380
    bno055
    ep93xx_adc
-- 
2.39.5