Re: [PATCH v4 1/6] dt-bindings: mfd: convert mxs-lradc bindings to json-schema

[Rob Herring <robh@kernel.org>]

On Thu, May 29, 2025 at 04:35:08PM +0200, Dario Binacchi wrote:
> Convert the Freescale MXS Low-Resoulution ADC (LRADC) device tree
> binding documentation to json-schema.
> 
> The clocks and #io-channel-cells properties have also been added; They
> are present in the respective SoC DTSI files but were missing from the
> old mxs-lradc.txt file.
> 
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> 
> ---
> 
> Changes in v4:
> - Fix typo Low-Resoulution -> Low-Resolution'
> - Wrap lines at 80 char.
> - Drop '|' from the description
> - Describe what each interrupt is for.
> - Move touchscreen-wires constraint for imx28 to the top level
> 
> Changes in v3:
> - Add Reviewed-by tag of Conor Dooley
> 
>  .../devicetree/bindings/mfd/mxs-lradc.txt     |  45 ------
>  .../devicetree/bindings/mfd/mxs-lradc.yaml    | 131 ++++++++++++++++++
>  2 files changed, 131 insertions(+), 45 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/mfd/mxs-lradc.txt
>  create mode 100644 Documentation/devicetree/bindings/mfd/mxs-lradc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/mxs-lradc.txt b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt
> deleted file mode 100644
> index 755cbef0647d..000000000000
> --- a/Documentation/devicetree/bindings/mfd/mxs-lradc.txt
> +++ /dev/null
> @@ -1,45 +0,0 @@
> -* Freescale MXS LRADC device driver
> -
> -Required properties:
> -- compatible: Should be "fsl,imx23-lradc" for i.MX23 SoC and "fsl,imx28-lradc"
> -              for i.MX28 SoC
> -- reg: Address and length of the register set for the device
> -- interrupts: Should contain the LRADC interrupts
> -
> -Optional properties:
> -- fsl,lradc-touchscreen-wires: Number of wires used to connect the touchscreen
> -                               to LRADC. Valid value is either 4 or 5. If this
> -                               property is not present, then the touchscreen is
> -                               disabled. 5 wires is valid for i.MX28 SoC only.
> -- fsl,ave-ctrl: number of samples per direction to calculate an average value.
> -                Allowed value is 1 ... 32, default is 4
> -- fsl,ave-delay: delay between consecutive samples. Allowed value is
> -                 2 ... 2048. It is used if 'fsl,ave-ctrl' > 1, counts at
> -                 2 kHz and its default is 2 (= 1 ms)
> -- fsl,settling: delay between plate switch to next sample. Allowed value is
> -                1 ... 2047. It counts at 2 kHz and its default is
> -                10 (= 5 ms)
> -
> -Example for i.MX23 SoC:
> -
> -	lradc@80050000 {
> -		compatible = "fsl,imx23-lradc";
> -		reg = <0x80050000 0x2000>;
> -		interrupts = <36 37 38 39 40 41 42 43 44>;
> -		fsl,lradc-touchscreen-wires = <4>;
> -		fsl,ave-ctrl = <4>;
> -		fsl,ave-delay = <2>;
> -		fsl,settling = <10>;
> -	};
> -
> -Example for i.MX28 SoC:
> -
> -	lradc@80050000 {
> -		compatible = "fsl,imx28-lradc";
> -		reg = <0x80050000 0x2000>;
> -		interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>;
> -		fsl,lradc-touchscreen-wires = <5>;
> -		fsl,ave-ctrl = <4>;
> -		fsl,ave-delay = <2>;
> -		fsl,settling = <10>;
> -	};
> diff --git a/Documentation/devicetree/bindings/mfd/mxs-lradc.yaml b/Documentation/devicetree/bindings/mfd/mxs-lradc.yaml
> new file mode 100644
> index 000000000000..f90fdfbb74a8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/mxs-lradc.yaml
> @@ -0,0 +1,131 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/mxs-lradc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale MXS Low-Resolution ADC (LRADC)
> +
> +maintainers:
> +  - Dario Binacchi <dario.binacchi@amarulasolutions.com>
> +
> +description:
> +  The LRADC provides 16 physical channels of 12-bit resolution for
> +  analog-to-digital conversion and includes an integrated 4-wire/5-wire
> +  touchscreen controller.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - fsl,imx23-lradc
> +          - fsl,imx28-lradc
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 1
> +
> +  interrupts:
> +    minItems: 9
> +    maxItems: 13
> +
> +  fsl,lradc-touchscreen-wires:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [4, 5]
> +    description:
> +      Number of wires used to connect the touchscreen to LRADC.
> +      If this property is not present, then the touchscreen is disabled.

Is this 1 paragraph or 2? If 1, it is not wrapped properly.

If 2, then it should have a blank line in between paragraphs and use 
'>':

    description: >
      Number of wires used to connect the touchscreen to LRADC.

      If this property is not present, then the touchscreen is disabled.


See writing-schema.rst for more details.

> +
> +  fsl,ave-ctrl:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    minimum: 1
> +    maximum: 32
> +    default: 4
> +    description: |

Don't need '|'.

> +      Number of samples per direction to calculate an average value.
> +
> +  fsl,ave-delay:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    minimum: 2
> +    maximum: 2048
> +    default: 2
> +    description:
> +      Delay between consecutive samples.
> +      It is used if 'fsl,ave-ctrl' > 1, counts at 2 kHz and its
> +      default value (i. e. 2) is 1 ms.

1 paragraph or 2?

> +
> +  fsl,settling:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    minimum: 1
> +    maximum: 2047
> +    default: 10
> +    description:
> +      Delay between plate switch to next sample.
> +      It counts at 2 kHz and its default (i. e. 10) is 5 ms.

1 paragraph or 2?

> +
> +  "#io-channel-cells":
> +    const: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - interrupts
> +
> +if:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - fsl,imx23-lradc
> +then:
> +  properties:
> +    interrupts:
> +      items:
> +        - description: channel 0
> +        - description: channel 1
> +        - description: channel 2
> +        - description: channel 3
> +        - description: channel 4
> +        - description: channel 5
> +        - description: touchscreen
> +        - description: channel 6
> +        - description: channel 7
> +    fsl,lradc-touchscreen-wires:
> +      const: 4
> +else:
> +  properties:
> +    interrupts:
> +      items:
> +        - description: threshold 0
> +        - description: threshold 1
> +        - description: channel 0
> +        - description: channel 1
> +        - description: channel 2
> +        - description: channel 3
> +        - description: channel 4
> +        - description: channel 5
> +        - description: button 0
> +        - description: button 1
> +        - description: touchscreen
> +        - description: channel 6
> +        - description: channel 7
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    lradc@80050000 {
> +        compatible = "fsl,imx23-lradc";
> +        reg = <0x80050000 0x2000>;
> +        interrupts = <36>, <37>, <38>, <39>, <40>,
> +                     <41>, <42>, <43>, <44>;
> +        clocks = <&clks 26>;
> +        #io-channel-cells = <1>;
> +        fsl,lradc-touchscreen-wires = <4>;
> +        fsl,ave-ctrl = <4>;
> +        fsl,ave-delay = <2>;
> +        fsl,settling = <10>;
> +    };
> -- 
> 2.43.0
>