From: "Álvaro Fernández Rojas" <noltari@gmail.com>
To: jonas.gorski@gmail.com, florian.fainelli@broadcom.com,
andrew@lunn.ch, olteanv@gmail.com, davem@davemloft.net,
edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
vivien.didelot@gmail.com, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, dgcbueu@gmail.com
Cc: "Álvaro Fernández Rojas" <noltari@gmail.com>
Subject: [RFC PATCH 07/10] net: dsa: b53: prevent GMII_PORT_OVERRIDE_CTRL access on BCM5325
Date: Sat, 31 May 2025 12:13:05 +0200 [thread overview]
Message-ID: <20250531101308.155757-8-noltari@gmail.com> (raw)
In-Reply-To: <20250531101308.155757-1-noltari@gmail.com>
BCM5325 doesn't implement GMII_PORT_OVERRIDE_CTRL register so we should
avoid reading or writing it.
PORT_OVERRIDE_RX_FLOW and PORT_OVERRIDE_TX_FLOW aren't defined on BCM5325
and we should use PORT_OVERRIDE_LP_FLOW_25 instead.
Fixes: 5e004460f874 ("net: dsa: b53: Add helper to set link parameters")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
drivers/net/dsa/b53/b53_common.c | 21 +++++++++++++++++----
drivers/net/dsa/b53/b53_regs.h | 1 +
2 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index fd0752100df8..387e1e7ec749 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1278,6 +1278,8 @@ static void b53_force_link(struct b53_device *dev, int port, int link)
if (port == dev->imp_port) {
off = B53_PORT_OVERRIDE_CTRL;
val = PORT_OVERRIDE_EN;
+ } else if (is5325(dev)) {
+ return;
} else {
off = B53_GMII_PORT_OVERRIDE_CTRL(port);
val = GMII_PO_EN;
@@ -1302,6 +1304,8 @@ static void b53_force_port_config(struct b53_device *dev, int port,
if (port == dev->imp_port) {
off = B53_PORT_OVERRIDE_CTRL;
val = PORT_OVERRIDE_EN;
+ } else if (is5325(dev)) {
+ return;
} else {
off = B53_GMII_PORT_OVERRIDE_CTRL(port);
val = GMII_PO_EN;
@@ -1332,10 +1336,19 @@ static void b53_force_port_config(struct b53_device *dev, int port,
return;
}
- if (rx_pause)
- reg |= PORT_OVERRIDE_RX_FLOW;
- if (tx_pause)
- reg |= PORT_OVERRIDE_TX_FLOW;
+ if (rx_pause) {
+ if (is5325(dev))
+ reg |= PORT_OVERRIDE_LP_FLOW_25;
+ else
+ reg |= PORT_OVERRIDE_RX_FLOW;
+ }
+
+ if (tx_pause) {
+ if (is5325(dev))
+ reg |= PORT_OVERRIDE_LP_FLOW_25;
+ else
+ reg |= PORT_OVERRIDE_TX_FLOW;
+ }
b53_write8(dev, B53_CTRL_PAGE, off, reg);
}
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
index 896684d7f594..ab15f36a135a 100644
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -95,6 +95,7 @@
#define PORT_OVERRIDE_SPEED_10M (0 << PORT_OVERRIDE_SPEED_S)
#define PORT_OVERRIDE_SPEED_100M (1 << PORT_OVERRIDE_SPEED_S)
#define PORT_OVERRIDE_SPEED_1000M (2 << PORT_OVERRIDE_SPEED_S)
+#define PORT_OVERRIDE_LP_FLOW_25 BIT(3) /* BCM5325 only */
#define PORT_OVERRIDE_RV_MII_25 BIT(4) /* BCM5325 only */
#define PORT_OVERRIDE_RX_FLOW BIT(4)
#define PORT_OVERRIDE_TX_FLOW BIT(5)
--
2.39.5
next prev parent reply other threads:[~2025-05-31 10:13 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-31 10:12 [RFC PATCH 00/10] net: dsa: b53: fix BCM5325 support Álvaro Fernández Rojas
2025-05-31 10:12 ` [RFC PATCH 01/10] net: dsa: b53: add support for FDB operations on 5325/5365 Álvaro Fernández Rojas
2025-05-31 23:41 ` kernel test robot
2025-06-02 18:22 ` Florian Fainelli
2025-06-02 20:09 ` Jonas Gorski
2025-05-31 10:13 ` [RFC PATCH 02/10] net: dsa: b53: prevent FAST_AGE access on BCM5325 Álvaro Fernández Rojas
2025-06-02 9:37 ` Vladimir Oltean
2025-06-02 18:01 ` Florian Fainelli
2025-06-03 10:19 ` Vladimir Oltean
2025-05-31 10:13 ` [RFC PATCH 03/10] net: dsa: b53: prevent SWITCH_CTRL " Álvaro Fernández Rojas
2025-06-02 18:03 ` Florian Fainelli
2025-05-31 10:13 ` [RFC PATCH 04/10] net: dsa: b53: fix IP_MULTICAST_CTRL " Álvaro Fernández Rojas
2025-06-02 18:06 ` Florian Fainelli
2025-06-02 19:59 ` Jonas Gorski
2025-06-03 10:50 ` Álvaro Fernández Rojas
2025-05-31 10:13 ` [RFC PATCH 05/10] net: dsa: b53: prevent DIS_LEARNING access " Álvaro Fernández Rojas
2025-06-02 9:40 ` Vladimir Oltean
2025-05-31 10:13 ` [RFC PATCH 06/10] net: dsa: b53: prevent BRCM_HDR " Álvaro Fernández Rojas
2025-06-02 18:07 ` Florian Fainelli
2025-05-31 10:13 ` Álvaro Fernández Rojas [this message]
2025-06-02 18:08 ` [RFC PATCH 07/10] net: dsa: b53: prevent GMII_PORT_OVERRIDE_CTRL " Florian Fainelli
2025-05-31 10:13 ` [RFC PATCH 08/10] net: dsa: b53: fix unicast/multicast flooding " Álvaro Fernández Rojas
2025-06-02 9:44 ` Vladimir Oltean
2025-06-02 18:09 ` Florian Fainelli
2025-06-02 20:08 ` Jonas Gorski
2025-06-03 10:18 ` Álvaro Fernández Rojas
2025-06-03 10:31 ` Jonas Gorski
2025-05-31 10:13 ` [RFC PATCH 09/10] net: dsa: b53: fix b53_imp_vlan_setup for BCM5325 Álvaro Fernández Rojas
2025-06-02 18:11 ` Florian Fainelli
2025-06-03 10:12 ` Álvaro Fernández Rojas
2025-05-31 10:13 ` [RFC PATCH 10/10] net: dsa: b53: ensure BCM5325 PHYs are enabled Álvaro Fernández Rojas
2025-06-02 16:00 ` Florian Fainelli
2025-06-03 10:13 ` Álvaro Fernández Rojas
2025-06-02 20:14 ` [RFC PATCH 00/10] net: dsa: b53: fix BCM5325 support Jonas Gorski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250531101308.155757-8-noltari@gmail.com \
--to=noltari@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=dgcbueu@gmail.com \
--cc=edumazet@google.com \
--cc=florian.fainelli@broadcom.com \
--cc=jonas.gorski@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.