All of lore.kernel.org
 help / color / mirror / Atom feed
From: Aaron Tomlin <atomlin@atomlin.com>
To: mpi3mr-linuxdrv.pdl@broadcom.com
Cc: kashyap.desai@broadcom.com, sumit.saxena@broadcom.com,
	sreekanth.reddy@broadcom.com,
	James.Bottomley@HansenPartnership.com,
	martin.petersen@oracle.com, atomlin@atomlin.com,
	linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [RFC PATCH v2 1/1] scsi: mpi3mr: Introduce smp_affinity_enable module parameter
Date: Sat, 31 May 2025 21:40:56 -0400	[thread overview]
Message-ID: <20250601014056.128716-2-atomlin@atomlin.com> (raw)
In-Reply-To: <20250601014056.128716-1-atomlin@atomlin.com>

This patch introduces a new module parameter namely
"smp_affinity_enable", to govern the application of system-wide IRQ
affinity (with kernel boot-time parameter "irqaffinity") for MSI-X
interrupts. By default, the default IRQ affinity mask will not be
respected. Set smp_affinity_enable to 0 disables this behaviour.
Consequently, preventing the auto-assignment of MSI-X IRQs.

Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
---
 drivers/scsi/mpi3mr/mpi3mr.h    |  1 +
 drivers/scsi/mpi3mr/mpi3mr_fw.c | 14 ++++++++++++--
 drivers/scsi/mpi3mr/mpi3mr_os.c | 14 +++++++++++---
 3 files changed, 24 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index 9bbc7cb98ca3..82a0c1dd2f59 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -1378,6 +1378,7 @@ struct mpi3mr_ioc {
 	u32 num_tb_segs;
 	struct dma_pool *trace_buf_pool;
 	struct segments *trace_buf;
+	bool smp_affinity_enable;
 
 };
 
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 1d7901a8f0e4..9cbe1744213d 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -22,6 +22,10 @@ static int poll_queues;
 module_param(poll_queues, int, 0444);
 MODULE_PARM_DESC(poll_queues, "Number of queues for io_uring poll mode. (Range 1 - 126)");
 
+static int smp_affinity_enable = 1;
+module_param(smp_affinity_enable, int, 0444);
+MODULE_PARM_DESC(smp_affinity_enable, "SMP affinity feature enable/disable Default: enable(1)");
+
 #if defined(writeq) && defined(CONFIG_64BIT)
 static inline void mpi3mr_writeq(__u64 b, volatile void __iomem *addr)
 {
@@ -821,6 +825,7 @@ static int mpi3mr_setup_isr(struct mpi3mr_ioc *mrioc, u8 setup_one)
 	int retval;
 	int i;
 	struct irq_affinity desc = { .pre_vectors =  1, .post_vectors = 1 };
+	struct irq_affinity *descp = &desc;
 
 	if (mrioc->is_intr_info_set)
 		return 0;
@@ -852,10 +857,13 @@ static int mpi3mr_setup_isr(struct mpi3mr_ioc *mrioc, u8 setup_one)
 
 		desc.post_vectors = mrioc->requested_poll_qcount;
 		min_vec = desc.pre_vectors + desc.post_vectors;
-		irq_flags |= PCI_IRQ_AFFINITY | PCI_IRQ_ALL_TYPES;
+		if (mrioc->smp_affinity_enable)
+			irq_flags |= PCI_IRQ_AFFINITY | PCI_IRQ_ALL_TYPES;
+		else
+			descp = NULL;
 
 		retval = pci_alloc_irq_vectors_affinity(mrioc->pdev,
-			min_vec, max_vectors, irq_flags, &desc);
+			min_vec, max_vectors, irq_flags, descp);
 
 		if (retval < 0) {
 			ioc_err(mrioc, "cannot allocate irq vectors, ret %d\n",
@@ -4233,6 +4241,8 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
 		goto out_failed_noretry;
 	}
 
+	mrioc->smp_affinity_enable = smp_affinity_enable ? true : false;
+
 	retval = mpi3mr_setup_isr(mrioc, 1);
 	if (retval) {
 		ioc_err(mrioc, "Failed to setup ISR error %d\n",
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index ce444efd859e..6ea73cf7579b 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -4064,6 +4064,9 @@ static void mpi3mr_map_queues(struct Scsi_Host *shost)
 	int i, qoff, offset;
 	struct blk_mq_queue_map *map = NULL;
 
+	if (shost->nr_hw_queues == 1)
+		return;
+
 	offset = mrioc->op_reply_q_offset;
 
 	for (i = 0, qoff = 0; i < HCTX_MAX_TYPES; i++) {
@@ -5422,8 +5425,6 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	shost->max_channel = 0;
 	shost->max_id = 0xFFFFFFFF;
 
-	shost->host_tagset = 1;
-
 	if (prot_mask >= 0)
 		scsi_host_set_prot(shost, prot_mask);
 	else {
@@ -5471,7 +5472,14 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto init_ioc_failed;
 	}
 
-	shost->nr_hw_queues = mrioc->num_op_reply_q;
+	shost->host_tagset = 0;
+	shost->nr_hw_queues = 1;
+
+	if (mrioc->smp_affinity_enable) {
+		shost->nr_hw_queues = mrioc->num_op_reply_q;
+		shost->host_tagset = 1;
+	}
+
 	if (mrioc->active_poll_qcount)
 		shost->nr_maps = 3;
 
-- 
2.49.0


  reply	other threads:[~2025-06-01  1:41 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-01  1:40 [RFC PATCH v2 0/1] scsi: mpi3mr: Introduce smp_affinity_enable module parameter Aaron Tomlin
2025-06-01  1:40 ` Aaron Tomlin [this message]
2025-06-16 20:51   ` [RFC PATCH v2 1/1] " Martin K. Petersen
2025-06-17  7:18   ` John Garry
  -- strict thread matches above, loose matches on Subject: below --
2025-06-17 16:34 Sean A.
2025-06-18  6:49 ` John Garry
2025-06-18 15:53   ` Sean A.
2025-06-19 19:35   ` Aaron Tomlin
2025-06-20 10:43     ` John Garry
2025-06-23  5:17   ` Christoph Hellwig
2025-06-24 14:29     ` Daniel Wagner
2025-06-25 13:03       ` Aaron Tomlin
2025-07-01 13:54         ` Daniel Wagner
2025-07-02  0:30           ` Aaron Tomlin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250601014056.128716-2-atomlin@atomlin.com \
    --to=atomlin@atomlin.com \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=kashyap.desai@broadcom.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=mpi3mr-linuxdrv.pdl@broadcom.com \
    --cc=sreekanth.reddy@broadcom.com \
    --cc=sumit.saxena@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.