From: "Álvaro Fernández Rojas" <noltari@gmail.com>
To: jonas.gorski@gmail.com, florian.fainelli@broadcom.com,
andrew@lunn.ch, olteanv@gmail.com, davem@davemloft.net,
edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
vivien.didelot@gmail.com, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, dgcbueu@gmail.com
Cc: "Florian Fainelli" <f.fainelli@gmail.com>,
"Álvaro Fernández Rojas" <noltari@gmail.com>
Subject: [RFC PATCH net-next v2 01/10] net: dsa: b53: add support for FDB operations on 5325/5365
Date: Tue, 3 Jun 2025 22:48:49 +0200 [thread overview]
Message-ID: <20250603204858.72402-2-noltari@gmail.com> (raw)
In-Reply-To: <20250603204858.72402-1-noltari@gmail.com>
From: Florian Fainelli <f.fainelli@gmail.com>
BCM5325 and BCM5365 are part of a much older generation of switches which,
due to their limited number of ports and VLAN entries (up to 256) allowed
a single 64-bit register to hold a full ARL entry.
This requires a little bit of massaging when reading, writing and
converting ARL entries in both directions.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
drivers/net/dsa/b53/b53_common.c | 104 +++++++++++++++++++++++++------
drivers/net/dsa/b53/b53_priv.h | 29 +++++++++
drivers/net/dsa/b53/b53_regs.h | 7 ++-
3 files changed, 117 insertions(+), 23 deletions(-)
v2: add changes requested by Jonas and fix proposed by Florian:
- Add b53_arl_to_entry_25 function.
- Add b53_arl_from_entry_25 function.
- Add b53_arl_read_25 function, fixing usage of ARLTBL_VALID_25 and
ARLTBL_VID_MASK_25.
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 132683ed3abe6..feea531732c7b 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1781,6 +1781,45 @@ static int b53_arl_read(struct b53_device *dev, u64 mac,
return *idx >= dev->num_arl_bins ? -ENOSPC : -ENOENT;
}
+static int b53_arl_read_25(struct b53_device *dev, u64 mac,
+ u16 vid, struct b53_arl_entry *ent, u8 *idx)
+{
+ DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES);
+ unsigned int i;
+ int ret;
+
+ ret = b53_arl_op_wait(dev);
+ if (ret)
+ return ret;
+
+ bitmap_zero(free_bins, dev->num_arl_bins);
+
+ /* Read the bins */
+ for (i = 0; i < dev->num_arl_bins; i++) {
+ u64 mac_vid;
+
+ b53_read64(dev, B53_ARLIO_PAGE,
+ B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid);
+
+ b53_arl_to_entry_25(ent, mac_vid);
+
+ if (!(mac_vid & ARLTBL_VALID_25)) {
+ set_bit(i, free_bins);
+ continue;
+ }
+ if ((mac_vid & ARLTBL_MAC_MASK) != mac)
+ continue;
+ if (dev->vlan_enabled &&
+ ((mac_vid >> ARLTBL_VID_S_65) & ARLTBL_VID_MASK_25) != vid)
+ continue;
+ *idx = i;
+ return 0;
+ }
+
+ *idx = find_first_bit(free_bins, dev->num_arl_bins);
+ return *idx >= dev->num_arl_bins ? -ENOSPC : -ENOENT;
+}
+
static int b53_arl_op(struct b53_device *dev, int op, int port,
const unsigned char *addr, u16 vid, bool is_valid)
{
@@ -1795,14 +1834,18 @@ static int b53_arl_op(struct b53_device *dev, int op, int port,
/* Perform a read for the given MAC and VID */
b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac);
- b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid);
+ if (!is5325(dev))
+ b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid);
/* Issue a read operation for this MAC */
ret = b53_arl_rw_op(dev, 1);
if (ret)
return ret;
- ret = b53_arl_read(dev, mac, vid, &ent, &idx);
+ if (is5325(dev) || is5365(dev))
+ ret = b53_arl_read_25(dev, mac, vid, &ent, &idx);
+ else
+ ret = b53_arl_read(dev, mac, vid, &ent, &idx);
/* If this is a read, just finish now */
if (op)
@@ -1846,12 +1889,17 @@ static int b53_arl_op(struct b53_device *dev, int op, int port,
ent.is_static = true;
ent.is_age = false;
memcpy(ent.mac, addr, ETH_ALEN);
- b53_arl_from_entry(&mac_vid, &fwd_entry, &ent);
+ if (is5325(dev) || is5365(dev))
+ b53_arl_from_entry_25(&mac_vid, &ent);
+ else
+ b53_arl_from_entry(&mac_vid, &fwd_entry, &ent);
b53_write64(dev, B53_ARLIO_PAGE,
B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid);
- b53_write32(dev, B53_ARLIO_PAGE,
- B53_ARLTBL_DATA_ENTRY(idx), fwd_entry);
+
+ if (!is5325(dev) && !is5365(dev))
+ b53_write32(dev, B53_ARLIO_PAGE,
+ B53_ARLTBL_DATA_ENTRY(idx), fwd_entry);
return b53_arl_rw_op(dev, 0);
}
@@ -1863,12 +1911,6 @@ int b53_fdb_add(struct dsa_switch *ds, int port,
struct b53_device *priv = ds->priv;
int ret;
- /* 5325 and 5365 require some more massaging, but could
- * be supported eventually
- */
- if (is5325(priv) || is5365(priv))
- return -EOPNOTSUPP;
-
mutex_lock(&priv->arl_mutex);
ret = b53_arl_op(priv, 0, port, addr, vid, true);
mutex_unlock(&priv->arl_mutex);
@@ -1895,10 +1937,15 @@ EXPORT_SYMBOL(b53_fdb_del);
static int b53_arl_search_wait(struct b53_device *dev)
{
unsigned int timeout = 1000;
- u8 reg;
+ u8 reg, offset;
+
+ if (is5325(dev) || is5365(dev))
+ offset = B53_ARL_SRCH_CTL_25;
+ else
+ offset = B53_ARL_SRCH_CTL;
do {
- b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, ®);
+ b53_read8(dev, B53_ARLIO_PAGE, offset, ®);
if (!(reg & ARL_SRCH_STDN))
return 0;
@@ -1915,13 +1962,24 @@ static void b53_arl_search_rd(struct b53_device *dev, u8 idx,
struct b53_arl_entry *ent)
{
u64 mac_vid;
- u32 fwd_entry;
- b53_read64(dev, B53_ARLIO_PAGE,
- B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid);
- b53_read32(dev, B53_ARLIO_PAGE,
- B53_ARL_SRCH_RSTL(idx), &fwd_entry);
- b53_arl_to_entry(ent, mac_vid, fwd_entry);
+ if (is5325(dev)) {
+ b53_read64(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSTL_0_MACVID_25,
+ &mac_vid);
+ b53_arl_to_entry_25(ent, mac_vid);
+ } else if (is5365(dev)) {
+ b53_read64(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSTL_0_MACVID_65,
+ &mac_vid);
+ b53_arl_to_entry_25(ent, mac_vid);
+ } else {
+ u32 fwd_entry;
+
+ b53_read64(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSTL_MACVID(idx),
+ &mac_vid);
+ b53_read32(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSTL(idx),
+ &fwd_entry);
+ b53_arl_to_entry(ent, mac_vid, fwd_entry);
+ }
}
static int b53_fdb_copy(int port, const struct b53_arl_entry *ent,
@@ -1942,14 +2000,20 @@ int b53_fdb_dump(struct dsa_switch *ds, int port,
struct b53_device *priv = ds->priv;
struct b53_arl_entry results[2];
unsigned int count = 0;
+ u8 offset;
int ret;
u8 reg;
mutex_lock(&priv->arl_mutex);
+ if (is5325(priv) || is5365(priv))
+ offset = B53_ARL_SRCH_CTL_25;
+ else
+ offset = B53_ARL_SRCH_CTL;
+
/* Start search operation */
reg = ARL_SRCH_STDN;
- b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg);
+ b53_write8(priv, offset, B53_ARL_SRCH_CTL, reg);
do {
ret = b53_arl_search_wait(priv);
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index a5ef7071ba07b..2238eef2a8771 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -298,6 +298,19 @@ static inline void b53_arl_to_entry(struct b53_arl_entry *ent,
ent->vid = mac_vid >> ARLTBL_VID_S;
}
+static inline void b53_arl_to_entry_25(struct b53_arl_entry *ent,
+ u64 mac_vid)
+{
+ memset(ent, 0, sizeof(*ent));
+ ent->port = (mac_vid >> ARLTBL_DATA_PORT_ID_S_25) &
+ ARLTBL_DATA_PORT_ID_MASK_25;
+ ent->is_valid = !!(mac_vid & ARLTBL_VALID_25);
+ ent->is_age = !!(mac_vid & ARLTBL_AGE_25);
+ ent->is_static = !!(mac_vid & ARLTBL_STATIC_25);
+ u64_to_ether_addr(mac_vid, ent->mac);
+ ent->vid = mac_vid >> ARLTBL_VID_S_65;
+}
+
static inline void b53_arl_from_entry(u64 *mac_vid, u32 *fwd_entry,
const struct b53_arl_entry *ent)
{
@@ -312,6 +325,22 @@ static inline void b53_arl_from_entry(u64 *mac_vid, u32 *fwd_entry,
*fwd_entry |= ARLTBL_AGE;
}
+static inline void b53_arl_from_entry_25(u64 *mac_vid,
+ const struct b53_arl_entry *ent)
+{
+ *mac_vid = ether_addr_to_u64(ent->mac);
+ *mac_vid |= (u64)(ent->port & ARLTBL_DATA_PORT_ID_MASK_25) <<
+ ARLTBL_DATA_PORT_ID_S_25;
+ *mac_vid |= (u64)(ent->vid & ARLTBL_VID_MASK_25) <<
+ ARLTBL_VID_S_65;
+ if (ent->is_valid)
+ *mac_vid |= ARLTBL_VALID_25;
+ if (ent->is_static)
+ *mac_vid |= ARLTBL_STATIC_25;
+ if (ent->is_age)
+ *mac_vid |= ARLTBL_AGE_25;
+}
+
#ifdef CONFIG_BCM47XX
#include <linux/bcm47xx_nvram.h>
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
index 1fbc5a204bc72..1f15332fb2a7c 100644
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -324,9 +324,10 @@
#define ARLTBL_VID_MASK 0xfff
#define ARLTBL_DATA_PORT_ID_S_25 48
#define ARLTBL_DATA_PORT_ID_MASK_25 0xf
-#define ARLTBL_AGE_25 BIT(61)
-#define ARLTBL_STATIC_25 BIT(62)
-#define ARLTBL_VALID_25 BIT(63)
+#define ARLTBL_VID_S_65 53
+#define ARLTBL_AGE_25 BIT_ULL(61)
+#define ARLTBL_STATIC_25 BIT_ULL(62)
+#define ARLTBL_VALID_25 BIT_ULL(63)
/* ARL Table Data Entry N Registers (32 bit) */
#define B53_ARLTBL_DATA_ENTRY(n) ((0x10 * (n)) + 0x18)
--
2.39.5
next prev parent reply other threads:[~2025-06-03 20:49 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-03 20:48 [RFC PATCH net-next v2 00/10] net: dsa: b53: fix BCM5325 support Álvaro Fernández Rojas
2025-06-03 20:48 ` Álvaro Fernández Rojas [this message]
2025-06-03 22:10 ` [RFC PATCH net-next v2 01/10] net: dsa: b53: add support for FDB operations on 5325/5365 Florian Fainelli
2025-06-04 6:32 ` Jonas Gorski
2025-06-11 7:55 ` Álvaro Fernández Rojas
2025-06-03 20:48 ` [RFC PATCH net-next v2 02/10] net: dsa: b53: prevent FAST_AGE access on BCM5325 Álvaro Fernández Rojas
2025-06-03 20:48 ` [RFC PATCH net-next v2 03/10] net: dsa: b53: prevent SWITCH_CTRL " Álvaro Fernández Rojas
2025-06-03 20:48 ` [RFC PATCH net-next v2 04/10] net: dsa: b53: fix IP_MULTICAST_CTRL " Álvaro Fernández Rojas
2025-06-03 20:48 ` [RFC PATCH net-next v2 05/10] net: dsa: b53: prevent DIS_LEARNING access " Álvaro Fernández Rojas
2025-06-03 20:48 ` [RFC PATCH net-next v2 06/10] net: dsa: b53: prevent BRCM_HDR " Álvaro Fernández Rojas
2025-06-04 18:05 ` Jonas Gorski
2025-06-03 20:48 ` [RFC PATCH net-next v2 07/10] net: dsa: b53: prevent GMII_PORT_OVERRIDE_CTRL " Álvaro Fernández Rojas
2025-06-03 20:48 ` [RFC PATCH net-next v2 08/10] net: dsa: b53: fix unicast/multicast flooding " Álvaro Fernández Rojas
2025-06-03 20:48 ` [RFC PATCH net-next v2 09/10] net: dsa: b53: fix b53_imp_vlan_setup for BCM5325 Álvaro Fernández Rojas
2025-06-03 20:48 ` [RFC PATCH net-next v2 10/10] net: dsa: b53: ensure BCM5325 PHYs are enabled Álvaro Fernández Rojas
2025-06-04 18:20 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250603204858.72402-2-noltari@gmail.com \
--to=noltari@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=dgcbueu@gmail.com \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=florian.fainelli@broadcom.com \
--cc=jonas.gorski@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.