All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: patches@lists.linux.dev, stable@vger.kernel.org
Cc: Liwei Sun <sunliweis@126.com>,
	Luiz Augusto von Dentz <luiz.von.dentz@intel.com>,
	Sasha Levin <sashal@kernel.org>,
	marcel@holtmann.org, luiz.dentz@gmail.com,
	linux-bluetooth@vger.kernel.org
Subject: [PATCH AUTOSEL 6.15 006/118] Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922
Date: Tue,  3 Jun 2025 20:48:57 -0400	[thread overview]
Message-ID: <20250604005049.4147522-6-sashal@kernel.org> (raw)
In-Reply-To: <20250604005049.4147522-1-sashal@kernel.org>

From: Liwei Sun <sunliweis@126.com>

[ Upstream commit 71d9d3522aec301e4a1c4eae4b5e0656fc4a7262 ]

A new variant of MT7922 wireless device has been identified.
The device introduces itself as MEDIATEK MT7922,
so treat it as MediaTek device.
With this patch, btusb driver works as expected:
[    3.151162] Bluetooth: Core ver 2.22
[    3.151185] Bluetooth: HCI device and connection manager initialized
[    3.151189] Bluetooth: HCI socket layer initialized
[    3.151191] Bluetooth: L2CAP socket layer initialized
[    3.151194] Bluetooth: SCO socket layer initialized
[    3.295718] Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512
[    4.676634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.676637] Bluetooth: BNEP filters: protocol multicast
[    4.676640] Bluetooth: BNEP socket layer initialized
[    5.560453] Bluetooth: hci0: Device setup in 2320660 usecs
[    5.560457] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[    5.619197] Bluetooth: hci0: AOSP extensions version v1.00
[    5.619204] Bluetooth: hci0: AOSP quality report is supported
[    5.619301] Bluetooth: MGMT ver 1.23
[    6.741247] Bluetooth: RFCOMM TTY layer initialized
[    6.741258] Bluetooth: RFCOMM socket layer initialized
[    6.741261] Bluetooth: RFCOMM ver 1.11

lspci output:
04:00.0 Network controller: MEDIATEK Corp. MT7922 802.11ax PCI Express Wireless Network Adapter

USB information:
T:  Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3584 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us

Signed-off-by: Liwei Sun <sunliweis@126.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---

**YES** This commit should be backported to stable kernel trees. ##
Analysis ### Commit Assessment: 1. **Bug Fix Nature**: This commit fixes
a user-facing issue where the MediaTek MT7922 Bluetooth device with
VID/PID 13d3:3584 was not recognized by the btusb driver. Without this
fix, users with this specific hardware variant would have non-functional
Bluetooth. 2. **Code Changes**: The change is minimal and extremely
safe: - Adds a single line: `{ USB_DEVICE(0x13d3, 0x3584), .driver_info
= BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }` - This is purely additive -
it only adds device recognition without modifying any existing
functionality - Uses existing, well-tested driver flags (`BTUSB_MEDIATEK
| BTUSB_WIDEBAND_SPEECH`) that are already used for other MT7922
variants 3. **Historical Pattern**: Based on the similar commits
provided and git history analysis: - All 4 similar commits (adding
MT7922/MT7925 VID/PIDs) were marked as "Backport Status: YES" - Multiple
similar MT7922 VID/PID additions have been backported to stable kernels
(confirmed by git tag analysis showing commits like bf809efdcc4d
appearing in v6.10.x stable releases) - The pattern shows these hardware
enablement patches are consistently considered appropriate for stable
backports 4. **Risk Assessment**: - **Minimal Risk**: Only affects
systems with this specific USB device (VID 13d3, PID 3584) - **No
Behavioral Changes**: Doesn't modify any existing code paths or
algorithms - **Self-Contained**: Single device ID addition with proven
driver flags - **No Side Effects**: Cannot impact other hardware or
break existing functionality 5. **User Impact**: - **Immediate
Benefit**: Users with this MT7922 variant get working Bluetooth
functionality - **Hardware Support**: Essential for device recognition
on newer hardware that might ship with this specific variant - **No
Downside**: Zero impact on users without this hardware 6. **Stable Tree
Criteria Compliance**: - ✅ Fixes important user-facing issue (non-
working Bluetooth hardware) - ✅ Small, contained change - ✅ No
architectural modifications - ✅ Uses existing, stable code paths - ✅
Follows established pattern of similar backported commits The commit is
a textbook example of a stable-appropriate hardware enablement fix -
minimal risk, clear user benefit, and consistent with established
backport patterns for MediaTek Bluetooth device additions.

 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 256b451bbe065..df3380a8de85e 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -678,6 +678,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3568), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3584), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3605), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3607), .driver_info = BTUSB_MEDIATEK |
-- 
2.39.5


  parent reply	other threads:[~2025-06-04  0:50 UTC|newest]

Thread overview: 135+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-04  0:48 [PATCH AUTOSEL 6.15 001/118] net: macb: Check return value of dma_set_mask_and_coherent() Sasha Levin
2025-06-04  0:48 ` [PATCH AUTOSEL 6.15 002/118] net: lan743x: Modify the EEPROM and OTP size for PCI1xxxx devices Sasha Levin
2025-06-04  0:48 ` [PATCH AUTOSEL 6.15 003/118] tipc: use kfree_sensitive() for aead cleanup Sasha Levin
2025-06-04  0:48 ` [f2fs-dev] [PATCH AUTOSEL 6.15 004/118] f2fs: use vmalloc instead of kvmalloc in .init_{, de}compress_ctx Sasha Levin via Linux-f2fs-devel
2025-06-04  0:48   ` [PATCH AUTOSEL 6.15 004/118] f2fs: use vmalloc instead of kvmalloc in .init_{,de}compress_ctx Sasha Levin
2025-06-04  0:48 ` [PATCH AUTOSEL 6.15 005/118] bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem() Sasha Levin
2025-06-04  0:48 ` Sasha Levin [this message]
2025-06-04  0:48 ` [PATCH AUTOSEL 6.15 007/118] i2c: designware: Invoke runtime suspend on quick slave re-registration Sasha Levin
2025-06-04  0:48 ` [PATCH AUTOSEL 6.15 008/118] wifi: mt76: mt7996: drop fragments with multicast or broadcast RA Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 009/118] emulex/benet: correct command version selection in be_cmd_get_stats() Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 010/118] Bluetooth: btusb: Add new VID/PID 13d3/3630 for MT7925 Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 011/118] Bluetooth: btusb: Add RTL8851BE device 0x0bda:0xb850 Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 012/118] Bluetooth: ISO: Fix not using SID from adv report Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 013/118] Bluetooth: btmrvl_sdio: Fix wakeup source leaks on device unbind Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 014/118] Bluetooth: btmtksdio: " Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 015/118] wifi: mt76: mt7996: fix uninitialized symbol warning Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 016/118] wifi: mt76: mt76x2: Add support for LiteOn WN4516R,WN4519R Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 017/118] wifi: mt76: mt7921: add 160 MHz AP for mt7922 device Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 018/118] wifi: mt76: mt7925: introduce thermal protection Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 019/118] wifi: mac80211: validate SCAN_FLAG_AP in scan request during MLO Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 020/118] sctp: Do not wake readers in __sctp_write_space() Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 021/118] libbpf/btf: Fix string handling to support multi-split BTF Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 022/118] cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 023/118] i2c: tegra: check msg length in SMBUS block read Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 024/118] i2c: pasemi: Enable the unjam machine Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 025/118] i2c: npcm: Add clock toggle recovery Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 026/118] clk: qcom: gcc-x1e80100: Set FORCE MEM CORE for UFS clocks Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 027/118] clk: qcom: gcc: Set FORCE_MEM_CORE_ON for gcc_ufs_axi_clk for 8650/8750 Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 028/118] net: dlink: add synchronization for stats update Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 029/118] net: phy: mediatek: do not require syscon compatible for pio property Sasha Levin
2025-06-04  0:49   ` Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 030/118] wifi: ath12k: fix macro definition HAL_RX_MSDU_PKT_LENGTH_GET Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 031/118] wifi: ath12k: fix a possible dead lock caused by ab->base_lock Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 032/118] wifi: ath11k: Fix QMI memory reuse logic Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 033/118] iommu/amd: Allow matching ACPI HID devices without matching UIDs Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 034/118] wifi: rtw89: leave idle mode when setting WEP encryption for AP mode Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 035/118] tcp: always seek for minimal rtt in tcp_rcv_rtt_update() Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 036/118] tcp: remove zero TCP TS samples for autotuning Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 037/118] tcp: fix initial tp->rcvq_space.space value for passive TS enabled flows Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 038/118] tcp: add receive queue awareness in tcp_rcv_space_adjust() Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 039/118] x86/sgx: Prevent attempts to reclaim poisoned pages Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 040/118] ipv4/route: Use this_cpu_inc() for stats on PREEMPT_RT Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 041/118] net: page_pool: Don't recycle into cache " Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 042/118] xfrm: validate assignment of maximal possible SEQ number Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 043/118] net: phy: marvell-88q2xxx: Enable temperature measurement in probe again Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 044/118] openvswitch: Stricter validation for the userspace action Sasha Levin
2025-06-04  7:57   ` Ilya Maximets
2025-06-04  8:03     ` Greg KH
2025-06-04  8:19       ` Ilya Maximets
2025-06-04  8:28         ` Greg KH
2025-06-04  8:47           ` Ilya Maximets
2025-06-05 14:23           ` Jakub Kicinski
2025-06-05 14:45             ` Greg KH
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 045/118] net: atlantic: generate software timestamp just before the doorbell Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 046/118] pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name() Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 047/118] pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction() Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 048/118] bpf: Pass the same orig_call value to trampoline functions Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 049/118] net: stmmac: generate software timestamp just before the doorbell Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 050/118] pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction() Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 051/118] libbpf: Check bpf_map_skeleton link for NULL Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 052/118] pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get() Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 053/118] net/mlx5: HWS, fix counting of rules in the matcher Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 054/118] net: mlx4: add SOF_TIMESTAMPING_TX_SOFTWARE flag when getting ts info Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 055/118] net: vertexcom: mse102x: Return code for mse102x_rx_pkt_spi Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 056/118] wifi: rtw88: rtw8822bu VID/PID for BUFFALO WI-U2-866DM Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 057/118] wifi: iwlwifi: mld: call thermal exit without wiphy lock held Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 058/118] wireless: purelifi: plfxlc: fix memory leak in plfxlc_usb_wreq_asyn() Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 059/118] wifi: mac80211: do not offer a mesh path if forwarding is disabled Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 060/118] bpftool: Fix cgroup command to only show cgroup bpf programs Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 061/118] clk: rockchip: rk3036: mark ddrphy as critical Sasha Levin
2025-06-04  0:49   ` Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 062/118] hid-asus: check ROG Ally MCU version and warn Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 063/118] ipmi:ssif: Fix a shutdown race Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 064/118] rtla: Define __NR_sched_setattr for LoongArch Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 065/118] wifi: iwlwifi: mvm: fix beacon CCK flag Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 066/118] wifi: iwlwifi: dvm: pair transport op-mode enter/leave Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 067/118] wifi: iwlwifi: mld: check for NULL before referencing a pointer Sasha Levin
2025-06-04  0:49 ` [PATCH AUTOSEL 6.15 068/118] bpf: Add bpf_rbtree_{root,left,right} kfunc Sasha Levin
2025-06-14  4:29   ` Shung-Hsi Yu
2025-06-04  0:50 ` [f2fs-dev] [PATCH AUTOSEL 6.15 069/118] f2fs: fix to bail out in get_new_segment() Sasha Levin via Linux-f2fs-devel
2025-06-04  0:50   ` Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 070/118] tracing: Only return an adjusted address if it matches the kernel address Sasha Levin
2025-06-04  1:15   ` Steven Rostedt
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 071/118] netfilter: nft_set_pipapo: clamp maximum map bucket size to INT_MAX Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 072/118] libbpf: Add identical pointer detection to btf_dedup_is_equiv() Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 073/118] scsi: lpfc: Fix lpfc_check_sli_ndlp() handling for GEN_REQUEST64 commands Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 074/118] scsi: smartpqi: Add new PCI IDs Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 075/118] iommu/amd: Ensure GA log notifier callbacks finish running before module unload Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 076/118] wifi: iwlwifi: pcie: make sure to lock rxq->read Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 077/118] wifi: rtw89: 8922a: fix TX fail with wrong VCO setting Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 078/118] wifi: mac80211_hwsim: Prevent tsf from setting if beacon is disabled Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 079/118] netdevsim: Mark NAPI ID on skb in nsim_rcv Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 080/118] net/mlx5: HWS, Fix IP version decision Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 081/118] bpf: Use proper type to calculate bpf_raw_tp_null_args.mask index Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 082/118] wifi: mac80211: VLAN traffic in multicast path Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 083/118] Revert "mac80211: Dynamically set CoDel parameters per station" Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 084/118] wifi: iwlwifi: Add missing MODULE_FIRMWARE for Qu-c0-jf-b0 Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 085/118] net: bridge: mcast: update multicast contex when vlan state is changed Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 086/118] net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 087/118] vxlan: Do not treat dst cache initialization errors as fatal Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 088/118] bnxt_en: Remove unused field "ref_count" in struct bnxt_ulp Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 089/118] vxlan: Add RCU read-side critical sections in the Tx path Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 090/118] wifi: ath12k: correctly handle mcast packets for clients Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 091/118] wifi: ath12k: using msdu end descriptor to check for rx multicast packets Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 092/118] iommu: Avoid introducing more races Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 093/118] net: ethernet: ti: am65-cpsw: handle -EPROBE_DEFER Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 094/118] software node: Correct a OOB check in software_node_get_reference_args() Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 095/118] wifi: ath12k: make assoc link associate first Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 096/118] isofs: fix Y2038 and Y2156 issues in Rock Ridge TF entry Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 097/118] pinctrl: mcp23s08: Reset all pins to input at probe Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 098/118] wifi: ath12k: fix failed to set mhi state error during reboot with hardware grouping Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 099/118] scsi: lpfc: Use memcpy() for BIOS version Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 100/118] sock: Correct error checking condition for (assign|release)_proto_idx() Sasha Levin
2025-06-04  0:50 ` [Intel-wired-lan] [PATCH AUTOSEL 6.15 101/118] i40e: fix MMIO write access to an invalid page in i40e_clear_hw Sasha Levin
2025-06-04  0:50   ` Sasha Levin
2025-06-04  0:50 ` [Intel-wired-lan] [PATCH AUTOSEL 6.15 102/118] ixgbe: Fix unreachable retry logic in combined and byte I2C write functions Sasha Levin
2025-06-04  0:50   ` Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 103/118] RDMA/hns: initialize db in update_srq_db() Sasha Levin
2025-06-04  0:50 ` [Intel-wired-lan] [PATCH AUTOSEL 6.15 104/118] ice: fix check for existing switch rule Sasha Levin
2025-06-04  0:50   ` Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 105/118] usbnet: asix AX88772: leave the carrier control to phylink Sasha Levin
2025-06-04  0:50 ` [f2fs-dev] [PATCH AUTOSEL 6.15 106/118] f2fs: fix to set atomic write status more clear Sasha Levin via Linux-f2fs-devel
2025-06-04  0:50   ` Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 107/118] bpf, sockmap: Fix data lost during EAGAIN retries Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 108/118] net: ethernet: cortina: Use TOE/TSO on all TCP Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 109/118] octeontx2-pf: Add error log forcn10k_map_unmap_rq_policer() Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 110/118] wifi: rtw88: Set AMPDU factor to hardware for RTL8814A Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 111/118] wifi: ath12k: Fix incorrect rates sent to firmware Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 112/118] wifi: ath12k: Fix the enabling of REO queue lookup table feature Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 113/118] wifi: ath12k: Fix memory leak due to multiple rx_stats allocation Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 114/118] wifi: ath11k: determine PM policy based on machine model Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 115/118] wifi: ath12k: fix link valid field initialization in the monitor Rx Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 116/118] wifi: ath12k: fix incorrect CE addresses Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 117/118] wifi: ath12k: Pass correct values of center freq1 and center freq2 for 160 MHz Sasha Levin
2025-06-04  0:50 ` [PATCH AUTOSEL 6.15 118/118] net/mlx5: HWS, Harden IP version definer checks Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250604005049.4147522-6-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=luiz.dentz@gmail.com \
    --cc=luiz.von.dentz@intel.com \
    --cc=marcel@holtmann.org \
    --cc=patches@lists.linux.dev \
    --cc=stable@vger.kernel.org \
    --cc=sunliweis@126.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.