From: Sasha Levin <sashal@kernel.org>
To: patches@lists.linux.dev, stable@vger.kernel.org
Cc: Jason Xing <kernelxing@tencent.com>,
Tariq Toukan <tariqt@nvidia.com>,
Jakub Kicinski <kuba@kernel.org>, Sasha Levin <sashal@kernel.org>,
netdev@vger.kernel.org, linux-rdma@vger.kernel.org
Subject: [PATCH AUTOSEL 6.6 30/62] net: mlx4: add SOF_TIMESTAMPING_TX_SOFTWARE flag when getting ts info
Date: Tue, 3 Jun 2025 21:01:41 -0400 [thread overview]
Message-ID: <20250604010213.3462-30-sashal@kernel.org> (raw)
In-Reply-To: <20250604010213.3462-1-sashal@kernel.org>
From: Jason Xing <kernelxing@tencent.com>
[ Upstream commit b86bcfee30576b752302c55693fff97242b35dfd ]
As mlx4 has implemented skb_tx_timestamp() in mlx4_en_xmit(), the
SOFTWARE flag is surely needed when users are trying to get timestamp
information.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250510093442.79711-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Perfect! Now I can see that `skb_tx_timestamp(skb)` is called in the
`mlx4_en_xmit()` function, which is the main transmit function. This
confirms that the mlx4 driver does implement software timestamping. Now
let me compare this to the similar commits to see the pattern: **YES**
This commit should be backported to stable kernel trees. **Extensive
Explanation:** This commit addresses a clear inconsistency bug where the
mlx4 driver implements software timestamping functionality but fails to
advertise this capability to userspace through the ethtool timestamping
info interface. **Analysis of the fix:** 1. **The Problem**: The mlx4
driver calls `skb_tx_timestamp(skb)` in `mlx4_en_xmit()` at line 1091 of
`/drivers/net/ethernet/mellanox/mlx4/en_tx.c`, which means it properly
implements software TX timestamping. However, in
`mlx4_en_get_ts_info()`, it only advertises hardware timestamping
capabilities (`SOF_TIMESTAMPING_TX_HARDWARE`,
`SOF_TIMESTAMPING_RX_HARDWARE`, `SOF_TIMESTAMPING_RAW_HARDWARE`) but
omits the `SOF_TIMESTAMPING_TX_SOFTWARE` flag. 2. **The Fix**: The
change adds a single line `SOF_TIMESTAMPING_TX_SOFTWARE |` to the
`info->so_timestamping` field when hardware timestamping is supported,
correctly advertising both hardware and software timestamping
capabilities. 3. **Impact**: This is a user-facing API correctness
issue. Applications checking timestamping capabilities via ethtool would
incorrectly believe software timestamping is not supported, even though
the driver implements it. **Comparison with similar commits:** -
**Similar Commit #1 (YES)**: Also fixed a timestamping bug in mlx4,
showing these are important fixes - **Similar Commit #3 (YES)**: Fixed
incorrect timestamping capability reporting in mlx5 by removing false
software timestamping indication - **Similar Commit #5 (YES)**: Fixed
timestamping capabilities reporting using wrong BIT() macro in mlx5 The
pattern shows that timestamping capability reporting bugs are
consistently considered backport-worthy because they affect user-visible
API behavior. **Backport Criteria Assessment:** ✅ **Fixes a user-
affecting bug**: Applications cannot detect software timestamping
support ✅ **Small, contained change**: Single line addition with no
functional logic changes ✅ **No architectural changes**: Only fixes
capability reporting ✅ **Low regression risk**: Only adds a missing
flag, doesn't change driver behavior ✅ **Clear side effects**: None
beyond correctly advertising existing functionality ✅ **Follows stable
rules**: Important API correctness fix with minimal risk The fix is
identical in nature to Similar Commit #3 (marked YES) but in reverse -
where mlx5 removed false software timestamping advertisement, this adds
the missing software timestamping advertisement for mlx4 where it's
actually implemented.
drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
index 164a13272faa2..07dced3c2b1c0 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -1916,6 +1916,7 @@ static int mlx4_en_get_ts_info(struct net_device *dev,
if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_TS) {
info->so_timestamping |=
SOF_TIMESTAMPING_TX_HARDWARE |
+ SOF_TIMESTAMPING_TX_SOFTWARE |
SOF_TIMESTAMPING_RX_HARDWARE |
SOF_TIMESTAMPING_RAW_HARDWARE;
--
2.39.5
next prev parent reply other threads:[~2025-06-04 1:03 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-04 1:01 [PATCH AUTOSEL 6.6 01/62] net: macb: Check return value of dma_set_mask_and_coherent() Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 02/62] net: lan743x: Modify the EEPROM and OTP size for PCI1xxxx devices Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 03/62] tipc: use kfree_sensitive() for aead cleanup Sasha Levin
2025-06-04 1:01 ` [f2fs-dev] [PATCH AUTOSEL 6.6 04/62] f2fs: use vmalloc instead of kvmalloc in .init_{, de}compress_ctx Sasha Levin via Linux-f2fs-devel
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 04/62] f2fs: use vmalloc instead of kvmalloc in .init_{,de}compress_ctx Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 05/62] bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem() Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 06/62] i2c: designware: Invoke runtime suspend on quick slave re-registration Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 07/62] wifi: mt76: mt7996: drop fragments with multicast or broadcast RA Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 08/62] emulex/benet: correct command version selection in be_cmd_get_stats() Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 09/62] wifi: mt76: mt76x2: Add support for LiteOn WN4516R,WN4519R Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 10/62] wifi: mt76: mt7921: add 160 MHz AP for mt7922 device Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 11/62] sctp: Do not wake readers in __sctp_write_space() Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 12/62] cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 13/62] i2c: tegra: check msg length in SMBUS block read Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 14/62] i2c: npcm: Add clock toggle recovery Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 15/62] net: dlink: add synchronization for stats update Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 16/62] wifi: ath12k: fix macro definition HAL_RX_MSDU_PKT_LENGTH_GET Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 17/62] wifi: ath12k: fix a possible dead lock caused by ab->base_lock Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 18/62] wifi: ath11k: Fix QMI memory reuse logic Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 19/62] wifi: rtw89: leave idle mode when setting WEP encryption for AP mode Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 20/62] tcp: always seek for minimal rtt in tcp_rcv_rtt_update() Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 21/62] tcp: fix initial tp->rcvq_space.space value for passive TS enabled flows Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 22/62] x86/sgx: Prevent attempts to reclaim poisoned pages Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 23/62] ipv4/route: Use this_cpu_inc() for stats on PREEMPT_RT Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 24/62] openvswitch: Stricter validation for the userspace action Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 25/62] net: atlantic: generate software timestamp just before the doorbell Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 26/62] pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name() Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 27/62] pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction() Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 28/62] pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction() Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 29/62] pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get() Sasha Levin
2025-06-04 1:01 ` Sasha Levin [this message]
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 31/62] net: vertexcom: mse102x: Return code for mse102x_rx_pkt_spi Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 32/62] wireless: purelifi: plfxlc: fix memory leak in plfxlc_usb_wreq_asyn() Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 33/62] wifi: mac80211: do not offer a mesh path if forwarding is disabled Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 34/62] bpftool: Fix cgroup command to only show cgroup bpf programs Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 35/62] clk: rockchip: rk3036: mark ddrphy as critical Sasha Levin
2025-06-04 1:01 ` Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 36/62] libbpf: Add identical pointer detection to btf_dedup_is_equiv() Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 37/62] scsi: lpfc: Fix lpfc_check_sli_ndlp() handling for GEN_REQUEST64 commands Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 38/62] iommu/amd: Ensure GA log notifier callbacks finish running before module unload Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 39/62] wifi: iwlwifi: pcie: make sure to lock rxq->read Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 40/62] wifi: mac80211_hwsim: Prevent tsf from setting if beacon is disabled Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 41/62] wifi: mac80211: VLAN traffic in multicast path Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 42/62] wifi: iwlwifi: Add missing MODULE_FIRMWARE for Qu-c0-jf-b0 Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 43/62] net: bridge: mcast: update multicast contex when vlan state is changed Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 44/62] net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 45/62] vxlan: Do not treat dst cache initialization errors as fatal Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 46/62] net: ethernet: ti: am65-cpsw: handle -EPROBE_DEFER Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 47/62] software node: Correct a OOB check in software_node_get_reference_args() Sasha Levin
2025-06-04 1:01 ` [PATCH AUTOSEL 6.6 48/62] pinctrl: mcp23s08: Reset all pins to input at probe Sasha Levin
2025-06-04 1:02 ` [PATCH AUTOSEL 6.6 49/62] wifi: ath12k: fix failed to set mhi state error during reboot with hardware grouping Sasha Levin
2025-06-04 1:02 ` [PATCH AUTOSEL 6.6 50/62] scsi: lpfc: Use memcpy() for BIOS version Sasha Levin
2025-06-04 1:02 ` [PATCH AUTOSEL 6.6 51/62] sock: Correct error checking condition for (assign|release)_proto_idx() Sasha Levin
2025-06-04 1:02 ` [Intel-wired-lan] [PATCH AUTOSEL 6.6 52/62] i40e: fix MMIO write access to an invalid page in i40e_clear_hw Sasha Levin
2025-06-04 1:02 ` Sasha Levin
2025-06-04 1:02 ` [Intel-wired-lan] [PATCH AUTOSEL 6.6 53/62] ice: fix check for existing switch rule Sasha Levin
2025-06-04 1:02 ` Sasha Levin
2025-06-04 1:02 ` [PATCH AUTOSEL 6.6 54/62] usbnet: asix AX88772: leave the carrier control to phylink Sasha Levin
2025-06-04 1:02 ` [f2fs-dev] [PATCH AUTOSEL 6.6 55/62] f2fs: fix to set atomic write status more clear Sasha Levin via Linux-f2fs-devel
2025-06-04 1:02 ` Sasha Levin
2025-06-04 1:02 ` [PATCH AUTOSEL 6.6 56/62] bpf, sockmap: Fix data lost during EAGAIN retries Sasha Levin
2025-06-04 1:02 ` [PATCH AUTOSEL 6.6 57/62] net: ethernet: cortina: Use TOE/TSO on all TCP Sasha Levin
2025-06-04 1:02 ` [PATCH AUTOSEL 6.6 58/62] octeontx2-pf: Add error log forcn10k_map_unmap_rq_policer() Sasha Levin
2025-06-04 1:02 ` [PATCH AUTOSEL 6.6 59/62] wifi: ath11k: determine PM policy based on machine model Sasha Levin
2025-06-04 1:02 ` [PATCH AUTOSEL 6.6 60/62] wifi: ath12k: fix link valid field initialization in the monitor Rx Sasha Levin
2025-06-04 1:02 ` [PATCH AUTOSEL 6.6 61/62] wifi: ath12k: fix incorrect CE addresses Sasha Levin
2025-06-04 1:02 ` [PATCH AUTOSEL 6.6 62/62] wifi: ath12k: Pass correct values of center freq1 and center freq2 for 160 MHz Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250604010213.3462-30-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=kernelxing@tencent.com \
--cc=kuba@kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=patches@lists.linux.dev \
--cc=stable@vger.kernel.org \
--cc=tariqt@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.