From: kernel test robot <lkp@intel.com>
To: Andrea della Porta <andrea.porta@suse.com>
Cc: oe-kbuild-all@lists.linux.dev,
Florian Fainelli <florian.fainelli@broadcom.com>
Subject: [linux-next:master 13996/14339] arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@1000120000 (brcm,bcm2712-pcie): Unevaluated properties are not allowed ('rp1_nexus' was unexpected)
Date: Wed, 4 Jun 2025 19:54:15 +0800 [thread overview]
Message-ID: <202506041952.baJDYBT4-lkp@intel.com> (raw)
tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
head: 911483b25612c8bc32a706ba940738cc43299496
commit: cbaec80bda2eff19682de44bf86363472841df4e [13996/14339] arm64: dts: broadcom: Add board DTS for Rpi5 which includes RP1 node
config: arm64-randconfig-051-20250604 (https://download.01.org/0day-ci/archive/20250604/202506041952.baJDYBT4-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 13.3.0
dtschema version: 2025.3.dev27+g32749b3
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250604/202506041952.baJDYBT4-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202506041952.baJDYBT4-lkp@intel.com/
dtcheck warnings: (new ones prefixed by >>)
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: hdmi@7c706400 (brcm,bcm2712-hdmi1): interrupt-names:4: 'hpd-connected' was expected
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: hdmi@7c706400 (brcm,bcm2712-hdmi1): interrupt-names: ['cec-tx', 'cec-rx', 'cec-low', 'hpd-connected', 'hpd-removed'] is too short
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: hdmi@7c706400 (brcm,bcm2712-hdmi1): interrupts: [[11], [12], [13], [14], [15]] is too short
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: firmware (raspberrypi,bcm2835-firmware): '#address-cells', '#size-cells', 'dma-ranges' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/arm/bcm/raspberrypi,bcm2835-firmware.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: axi (simple-bus): gpu: 'ranges' is a required property
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
>> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: pcie@1000120000 (brcm,bcm2712-pcie): Unevaluated properties are not allowed ('rp1_nexus' was unexpected)
from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: hvs@107c580000 (brcm,bcm2712-hvs): 'clock-names', 'interrupt-names' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2835-hvs.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: hvs@107c580000 (brcm,bcm2712-hvs): clocks: [[18, 4], [18, 16]] is too long
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2835-hvs.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: hvs@107c580000 (brcm,bcm2712-hvs): interrupts: [[2], [9], [16]] is too long
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2835-hvs.yaml#
--
arch/arm64/boot/dts/broadcom/bcm2712.dtsi:421.11-576.4: Warning (unit_address_vs_reg): /axi: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts:74.21-91.4: Warning (simple_bus_reg): /soc@107c000000/firmware: missing or empty reg/ranges property
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts:93.15-97.4: Warning (simple_bus_reg): /soc@107c000000/power: missing or empty reg/ranges property
arch/arm64/boot/dts/broadcom/bcm2712.dtsi:438.12-440.5: Warning (simple_bus_reg): /axi/gpu: missing or empty reg/ranges property
>> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: soc@107c000000 (simple-bus): firmware: 'ranges' is a required property
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
>> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: soc@107c000000 (simple-bus): power: 'ranges' is a required property
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
>> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: hdmi@7c701400 (brcm,bcm2712-hdmi0): interrupt-names:3: 'wakeup' was expected
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
>> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: hdmi@7c701400 (brcm,bcm2712-hdmi0): interrupt-names:4: 'hpd-connected' was expected
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
>> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: hdmi@7c701400 (brcm,bcm2712-hdmi0): interrupt-names: ['cec-tx', 'cec-rx', 'cec-low', 'hpd-connected', 'hpd-removed'] is too short
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
>> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: hdmi@7c701400 (brcm,bcm2712-hdmi0): interrupts: [[1], [2], [3], [7], [8]] is too short
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
>> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: hdmi@7c706400 (brcm,bcm2712-hdmi1): interrupt-names:3: 'wakeup' was expected
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
>> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: hdmi@7c706400 (brcm,bcm2712-hdmi1): interrupt-names:4: 'hpd-connected' was expected
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
>> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: hdmi@7c706400 (brcm,bcm2712-hdmi1): interrupt-names: ['cec-tx', 'cec-rx', 'cec-low', 'hpd-connected', 'hpd-removed'] is too short
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
>> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: hdmi@7c706400 (brcm,bcm2712-hdmi1): interrupts: [[11], [12], [13], [14], [15]] is too short
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
>> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: firmware (raspberrypi,bcm2835-firmware): '#address-cells', '#size-cells', 'dma-ranges' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/arm/bcm/raspberrypi,bcm2835-firmware.yaml#
>> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: axi (simple-bus): gpu: 'ranges' is a required property
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
>> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: hvs@107c580000 (brcm,bcm2712-hvs): 'clock-names', 'interrupt-names' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2835-hvs.yaml#
>> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: hvs@107c580000 (brcm,bcm2712-hvs): clocks: [[18, 4], [18, 16]] is too long
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2835-hvs.yaml#
>> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: hvs@107c580000 (brcm,bcm2712-hvs): interrupts: [[2], [9], [16]] is too long
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2835-hvs.yaml#
--
arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dtb: hdmi@7c706400 (brcm,bcm2712-hdmi1): interrupt-names:4: 'hpd-connected' was expected
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dtb: hdmi@7c706400 (brcm,bcm2712-hdmi1): interrupt-names: ['cec-tx', 'cec-rx', 'cec-low', 'hpd-connected', 'hpd-removed'] is too short
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dtb: hdmi@7c706400 (brcm,bcm2712-hdmi1): interrupts: [[11], [12], [13], [14], [15]] is too short
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dtb: firmware (raspberrypi,bcm2835-firmware): '#address-cells', '#size-cells', 'dma-ranges' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/arm/bcm/raspberrypi,bcm2835-firmware.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dtb: axi (simple-bus): gpu: 'ranges' is a required property
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
>> arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dtb: pcie@1000120000 (brcm,bcm2712-pcie): Unevaluated properties are not allowed ('rp1_nexus' was unexpected)
from schema $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dtb: hvs@107c580000 (brcm,bcm2712-hvs): 'clock-names', 'interrupt-names' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2835-hvs.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dtb: hvs@107c580000 (brcm,bcm2712-hvs): clocks: [[18, 4], [18, 16]] is too long
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2835-hvs.yaml#
arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dtb: hvs@107c580000 (brcm,bcm2712-hvs): interrupts: [[2], [9], [16]] is too long
from schema $id: http://devicetree.org/schemas/display/brcm,bcm2835-hvs.yaml#
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
reply other threads:[~2025-06-04 11:54 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202506041952.baJDYBT4-lkp@intel.com \
--to=lkp@intel.com \
--cc=andrea.porta@suse.com \
--cc=florian.fainelli@broadcom.com \
--cc=oe-kbuild-all@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.